HzdaDeve Centauri Carbon Smooth Cool Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This hzdadeve cool plate elegoo centauri review focuses on a non-heated build surface designed for the Elegoo Centauri Carbon and Centauri Carbon 2 printers. The HzdaDeve Centauri Carbon Smooth Cool Plate is a 260x271mm spring steel sheet coated with smooth PEI. It lacks active heating elements, relying instead on ambient cooling for print removal. The surface provides strong first-layer adhesion for materials like PLA and PETG. You get a durable, wear-resistant coating that simplifies maintenance. This spec-driven look explains how the physical dimensions and material choices affect your daily printing workflow.
What stands out
- 260x271mm dimensions match the Elegoo Centauri Carbon build area
- Spring steel base provides flexibility for easy print removal
- Smooth PEI coating ensures strong first-layer adhesion
- No heating element reduces preheating time and energy use
- Compatible with PLA (30-50℃) and PETG (50-70℃) filaments
Who it fits
Good fit for
You should choose this plate if you primarily print with PLA or PETG and prefer a passive cooling approach. The lack of a heater means you save energy and skip warm-up waits. The flexible spring steel design works well for users who want to pop prints off after they cool naturally. It suits those who want a simple, durable surface that does not require complex temperature calibration. If you stick to standard thermoplastics and value quick setup, this cool plate fits your workflow.
Who should skip it
Skip this option if you rely on heated beds for materials like ABS or ASA. The data shows this is a cool plate with no heating capability. You cannot maintain elevated temperatures to prevent warping in engineering plastics. If you need precise bed temperature control for multi-material prints or high-temperature filaments, this surface will not meet your needs. You must wait for the bed to cool to remove prints, which may slow down your workflow if you print frequently.
Verdict: This cool plate offers a practical, low-maintenance solution for PLA and PETG printing on the Elegoo Centauri Carbon. It trades active heating for simplicity and energy efficiency.
HzdaDeve Centauri Plate Specs
Primary Material: Spring steel
The base is made of flexible metal. This allows you to bend the plate slightly to pop prints off once they cool. You do not need to scrape or use excessive force to remove your models. This reduces the risk of scratching your hands or damaging the print surface during removal.
Dimensions: 260x271mm
These measurements define the exact build area. You must ensure your printer bed matches these dimensions. The plate is designed specifically for the Elegoo Centauri Carbon and Carbon 2 models. Using it on other printers may result in improper fit or coverage issues for larger projects.
Build Surface Type: Smooth PEI
The coating provides a flat, glossy finish for your prints. Smooth PEI offers strong first-layer adhesion, which helps prevent warping during long prints. This surface is ideal for PLA and PETG filaments. You get clean, professional-looking bottoms on your models without needing additional surface treatments.
Model: no heating cool plate
This plate does not have an active heating element. It relies on ambient temperature or passive cooling. This reduces energy consumption and preheating time. It is suitable for low-temperature materials like PLA and PETG. You cannot use it for high-temperature filaments that require a heated bed for proper adhesion.
Build Plate Design and Materials
According to the listing, this HzdaDeve plate is a 260x271mm sheet made from spring steel. This flexible metal base allows you to bend the plate slightly after printing. You can pop your finished models off without scraping or using excessive force. The surface features a smooth PEI coating. This wear-resistant layer is designed to withstand repeated heating cycles and daily use. It helps maintain stable performance over long periods. You should clean the plate with mild detergent and water. Avoid acetone or abrasive cleaners, as they may damage the coating.
This model is a no-heating cool plate. It lacks active heating elements, which means it supports low-temperature printing without a traditional heated bed. This reduces preheating time and energy consumption. The plate is ideal for PLA at 30-50℃ and PETG at 50-70℃. The smooth PEI surface provides strong first-layer adhesion. This reduces warping and improves success rates for long-duration models. The design is specific to the Elegoo Centauri Carbon and Centauri Carbon 2 printers. You must ensure your printer matches these models before purchasing. The flexible steel and smooth finish work together to make print removal easy. You do not need to worry about excessive force damaging your parts. This setup offers an efficient and eco-friendly printing experience for specific filament types.
Setup and Daily Operation Guide
Setting up the HzdaDeve Centauri Carbon Smooth Cool Plate requires no electrical connections. The listing describes this as a non-heated unit. You simply place the 260x271mm spring steel sheet onto your Elegoo Centauri Carbon or Centauri Carbon 2 printer bed. The plate fits the standard build area dimensions for these specific models. No tools or wiring are needed for installation. This design removes the complexity of managing heated bed circuits or temperature sensors. You get a straightforward mechanical swap.
Daily use focuses on low-temperature filament printing. The smooth PEI coating provides strong first-layer adhesion for materials like PLA and PETG. You can print PLA at temperatures between 30 and 50°C. PETG works well between 50 and 70°C. The plate does not require preheating. This saves energy and reduces wait time before you start a print. The surface is designed to hold models securely during long prints without warping.
After printing, you wait for the plate to cool to room temperature. The flexible spring steel base allows you to bend the sheet slightly. This action releases the print quickly. You do not need to scrape or use excessive force. Maintenance is simple. You can clean the smooth PEI surface with mild detergent and water. Remove dust and grease to maintain adhesion. Avoid acetone or abrasive cleaners. These chemicals can damage the coating. Regular cleaning ensures consistent performance over time. The durable surface withstands repeated handling and daily printing cycles.
Before You Buy This Plate
You need to verify your printer model before purchasing. This plate fits the Elegoo Centauri Carbon and Centauri Carbon 2 only. If you own a different machine, this part will not work. You must also check the size. The listing specifies 260x271mm dimensions. Ensure your printer bed matches these measurements exactly. Since this is a cool plate, you do not need to manage heated bed settings. This simplifies your workflow for materials like PLA and PETG. You can print at lower temperatures, which saves energy and reduces preheat time. Maintenance is straightforward. Clean the smooth PEI surface with mild detergent and water. Avoid acetone or abrasive cleaners, as they damage the coating. This plate works well alongside other build surfaces in 1 options. It offers a cost-effective solution for users who prefer non-heated printing. You get strong first-layer adhesion without the complexity of heating elements. The flexible spring steel base makes removal easy once prints cool down.
Check before you buy
- Verify your printer is an Elegoo Centauri Carbon or Carbon 2.
- Confirm your bed size matches the 260x271mm specification.
- Ensure you prefer low-temperature printing for PLA or PETG.
- Check that you do not require active heated bed functionality.
- Confirm you have mild detergent for cleaning the PEI surface.
The product at a glance
HzdaDeve Centauri Carbon Smooth Cool Plate
Best for: low-temperature PLA and PETG printing
- Primary Material
- Spring steel
- Dimensions
- 260x271mm
- Build Surface Type
- Smooth PEI
View on Amazon: HzdaDeve Centauri Carbon Smooth Cool Plate Affiliate link
This is a non-heating build plate for the Elegoo Centauri Carbon. It measures 260x271mm and features a smooth PEI coating on spring steel. You get strong first-layer adhesion and easy print removal after cooling. It supports low-temperature printing for PLA and PETG. This plate reduces preheating time and energy use. It suits users who want fast, efficient prints without a heated bed.
Pros
- Smooth PEI coating on spring steel base
- Dimensions of 260x271mm for Centauri Carbon
- Strong first-layer adhesion reduces warping
- Flexible design allows quick print removal
- Supports low-temp printing for PLA and PETG
Cons
- No heating element for temperature control
- Smooth surface may need texture for some materials
- Limited to specific printer models
Good fit if
- You print PLA or PETG at low temperatures
- You want faster print removal without scraping
- You use an Elegoo Centauri Carbon printer
Skip if
- You need heated bed support for high-temp filaments
- You print ABS or ASA requiring high heat
- You want a textured surface for grip
Verdict: HzdaDeve Cool Plate for Elegoo Centauri Carbon is a practical non-heating plate for low-temperature filament users. You get reliable adhesion and easy removal. It fits your needs if you prioritize speed and efficiency over heated bed capabilities.
Specifications side by side
| Spec | HzdaDeve Centauri Carbon Smooth Cool Plate |
|---|---|
| Primary Material | Spring steel |
| Dimensions | 260x271mm |
| Build Surface Type | Smooth PEI |
| Surface Finish | Smooth |
| Size | for Centauri Carbon |
| Model | no heating cool plate |
Frequently asked questions
Does the HzdaDeve Centauri Carbon Smooth Cool Plate heat up?
No, it is a non-heating build surface. The product listing explicitly identifies it as a cool plate with no heating elements. You must rely on your printer’s ambient temperature or bed prep for adhesion. This design suits users who print low-temperature filaments like PLA and PETG without needing active heat.
Is this plate compatible with the Elegoo Centauri Carbon 2?
Yes, it fits both the Centauri Carbon and Centauri Carbon 2 models. The specifications list the size as specifically for the Centauri Carbon, which covers both generations in this context. You do not need separate parts for either machine variant, provided you use the standard bed dimensions.
How do I remove prints from this build plate?
You remove prints by bending the flexible spring steel sheet. The plate is made of spring steel, allowing you to flex it slightly to pop models off once they cool. This mechanical release method avoids the need for scraping tools or excessive force that might damage your prints.
What surface finish does the HzdaDeve plate offer?
It features a smooth surface finish. The product name and attributes confirm it is the Smooth Cool Plate variant. This finish is ideal for standard PLA and PETG prints where a uniform, glossy top layer is desired. It does not provide the textured grip of other PEI coatings.
Does this plate require electrical connections for installation?
No, it requires no electrical connections. It is a passive, non-heated component. You simply place the 260x271mm sheet onto your printer bed. This makes setup straightforward and eliminates any wiring concerns associated with heated build surfaces, focusing entirely on mechanical fit and material properties.
What is the best use case for this plate?
It is best for low-temperature printing with PLA and PETG. The verdict highlights it as a practical option for users prioritizing speed and efficiency. If you do not require heated bed capabilities for high-temp materials like ABS, this cool plate provides reliable adhesion and easy removal for standard filaments.