Looking Beyond the HzdaDeve Centauri Carbon Smooth Cool? 6 Alternatives Worth a Look

How alternatives compare to HzdaDeve

BIQU 257x257mm PEO and PEI Build Plate

The BIQU plate targets Bambu Lab printers, not the Elegoo Centauri Carbon. You get a larger 257x257mm build area compared to the HzdaDeve's 260x271mm footprint. This option provides two distinct surfaces: a smooth PEI side and a textured PEO side. The HzdaDeve plate only offers a smooth finish. The BIQU unit uses a magnetic spring steel base, similar to the HzdaDeve design. However, you must disable detection sensors on certain Bambu models like the P2S and X2D. If you need dual-surface flexibility for different filaments, this is a stronger choice than the single-surface HzdaDeve plate.

Wefuit 257x257mm Smooth and Textured PEI Sheet

Wefuit offers a 257x257mm sheet compatible with a wide range of Bambu Lab printers, including the X1C and P2S. This contrasts with the HzdaDeve plate, which is exclusive to the Elegoo Centauri Carbon. The Wefuit sheet features both smooth and textured PEI surfaces on a spring steel base. The HzdaDeve plate lacks a textured option. Wefuit supports thermal printing up to 300°C, whereas the HzdaDeve model is a no-heating cool plate designed for low-temperature materials like PLA and PETG. If you print engineering materials requiring high heat or need textured adhesion, the Wefuit sheet provides capabilities the HzdaDeve cool plate cannot match.

UniTak3D 257x257mm Double-Sided PEI Build Plate

UniTak3D produces a double-sided PEI plate for Bambu Lab machines, differing significantly from the Elegoo-specific HzdaDeve option. The UniTak3D plate measures 257mm and includes both smooth and textured finishes. The HzdaDeve plate is strictly smooth. UniTak3D targets users printing Nylon or ABS, materials that often require heated beds. The HzdaDeve cool plate is designed for low-temperature printing without heat. While both use spring steel bases, the UniTak3D model offers textured grip for difficult materials. If you need high-temperature performance and dual surfaces, the UniTak3D plate is the superior alternative to the single-surface, low-temp HzdaDeve solution.

SAHVAIM 257x257mm Smooth and Textured PEI Plate

SAHVAIM provides a 257x257mm double-sided PEI plate for Bambu Lab printers, unlike the HzdaDeve plate for Elegoo. This SAHVAIM option includes smooth and textured PEI surfaces on a spring steel base. The HzdaDeve plate only has a smooth finish. SAHVAIM supports high heat resistance, making it suitable for diverse materials. The HzdaDeve cool plate is limited to low-temperature printing without a heated bed. If you value surface versatility and high thermal performance on a compact bed, the SAHVAIM plate offers more functionality. It allows easy part removal and handles materials that the HzdaDeve cool plate cannot support effectively.

Creality K1 Max 315x310mm Smooth PEI Build Plate

Creality offers a large 315x310mm smooth PEI sheet for the K1 Max and other Creality printers. This build area is larger than the HzdaDeve plate's 260x271mm dimensions. The Creality plate features a smooth PEI finish on a standard base. The HzdaDeve plate also uses a smooth PEI coating but is designed for low-temperature printing without heat. Creality's option is ideal for users needing extra build space and precise detail on larger models. If you require a larger print area and are using a compatible Creality printer, this plate provides more surface area than the smaller HzdaDeve alternative.

IdeaFormer-3D 257x257mm PEO and Textured PEI Plate

IdeaFormer-3D supplies a 257x257mm plate with smooth PEO and textured PEI surfaces for compact beds. This differs from the HzdaDeve plate, which is exclusive to the Elegoo Centauri Carbon and offers only a smooth finish. The IdeaFormer plate weighs 12.3 ounces and uses a spring steel base. It provides dual-surface versatility for diverse materials. The HzdaDeve cool plate focuses on low-temperature efficiency without heating. If you prioritize surface options over maximum build volume, the IdeaFormer plate is a solid choice. It allows you to switch between smooth and textured adhesion, a feature the single-surface HzdaDeve plate does not provide.

Quick picks

Our 7 picks

1 Best overall

HzdaDeve Centauri Carbon Smooth Cool Plate

Best for: Elegoo Centauri Carbon users needing low-temp printing

Primary Material

Spring steel

Dimensions

260x271mm

Build Surface Type

Smooth PEI

View on Amazon: HzdaDeve Centauri Carbon Smooth Cool Plate Affiliate link

This HzdaDeve build plate is designed for the Elegoo Centauri Carbon and Carbon 2 printers. It measures 260x271mm with a smooth PEI surface on spring steel. The plate supports low-temperature printing for PLA and PETG without needing a heated bed. This reduces preheating time and energy use. The flexible steel allows easy print removal after cooling. It suits users who want reliable adhesion and simple maintenance for standard filaments.

Pros

• Compatible with Elegoo Centauri Carbon and Carbon 2 models
• Smooth PEI coating on spring steel for strong first-layer adhesion
• Supports low-temperature printing for PLA and PETG
• Flexible design enables easy print removal without scraping

Cons

• Requires a separate cooling mechanism as it is not a heated plate
• Limited to specific Elegoo Centauri Carbon models
• Smooth finish only, no textured option included

Good fit if

• You own an Elegoo Centauri Carbon or Carbon 2 printer
• You primarily print with PLA or PETG filaments
• You prefer low-temperature printing to save energy

Skip if

• You need a heated build plate for high-temperature materials
• You use a printer model other than the Centauri Carbon
• You require a textured surface for better adhesion

Verdict: HzdaDeve Cool Plate for Elegoo Centauri Carbon is a practical upgrade for Centauri Carbon owners who want easy removal and low-temperature efficiency. It fits users who prioritize simple maintenance and reliable adhesion for standard filaments.

2 Also great

BIQU 257x257mm PEO and PEI Build Plate

Best for: Bambu Lab users wanting dual surface options

Primary Material

Spring steel

Dimensions

257x257mm

Build Surface Type

Smooth PEO, textured PEI

Build Plate Material

PEI, Spring Steel, PEO

View on Amazon: BIQU 257x257mm PEO and PEI Build Plate Affiliate link

This BIQU build plate offers a double-sided design with smooth PEO and textured PEI surfaces on a 257x257mm spring steel base. The magnetic attachment ensures easy print removal and strong adhesion. It fits Bambu Lab printers like the P1P, P1S, P2S, X2D, X1C, X1E, and A1. The flat construction supports high-quality bottom layers. You get two finish options in one plate.

Pros

• Double-sided surface with smooth PEO and textured PEI options
• 257x257mm size compatible with major Bambu Lab models
• Magnetic spring steel base for easy print removal
• Flat construction ensures high build plate flatness
• High temperature stability and flame retardant material

Cons

• Requires disabling build plate detection on P2S and X2D models
• 257x257mm size is smaller than the 315x310mm K1 Max plate
• No mention of included tools for installation

Good fit if

• You want two surface finishes in one plate
• You print on Bambu Lab P1P or P1S
• You need a magnetic spring steel base

Skip if

• You use a K1 Max printer
• You require a larger 315x310mm build area
• You prefer a single-sided textured PEI plate

Verdict: BIQU Designer Series Double-Sided PEI Plate provides two finishes on a magnetic spring steel base for Bambu Lab printers. It suits users who want flexibility without swapping plates, though P2S and X2D owners must disable detection.

3 Also great

Wefuit 257x257mm Smooth and Textured PEI Sheet

Best for: Dual-surface printing on 257x257mm machine beds

Primary Material

spring steel

Dimensions

256x256mm

Maximum Temperature

300℃

Build Surface Type

smooth and textured PEI

Build Plate Material

PEI, Spring Steel

View on Amazon: Wefuit 257x257mm Smooth and Textured PEI Sheet Affiliate link

This double-sided build plate features a flexible spring steel core measuring 257x257mm. One side provides a smooth PEI surface rated up to 260°C, while the reverse side has a textured PEI finish rated up to 300°C. It suits you if you need two distinct finishes for filaments like PLA, PETG, and ABS on a compatible 257x257mm heated bed.

Pros

• Dual-sided sheet offers both smooth and textured PEI surfaces
• Withstands up to 300°C on textured side and 260°C on smooth side
• Flexible spring steel plate enables manual print removal by bending
• Compatible with PLA, PETG, ABS, TPU, Nylon, PC, PA, ASA, and PVA

Cons

• Measures 257x257mm, making it smaller than 260x271mm Centauri platforms
• Smooth PEI surface has a lower heat ceiling of 260°C compared to 300°C on the textured side

Good fit if

• You run a 257x257mm bed system such as a Bambu Lab X1, P1, or A1 series machine.
• You want both glossy bottoms and textured finishes from one build plate.
• You print technical filaments like Nylon, PC, and ASA.

Skip if

• You need a native 260x271mm fit for an Elegoo Centauri Carbon machine.
• You plan to run smooth-surface prints at temperatures exceeding 260°C.

Verdict: Wefuit 257x257mm Smooth and Textured PEI Sheet gives 257x257mm bed owners flexible dual-surface printing with up to 300°C thermal support.

4 Also great

UniTak3D 257x257mm Double-Sided PEI Build Plate

Best for: Bambu Lab users needing textured adhesion

Primary Material

Spring Steel

Dimensions

257x257mm

Maximum Temperature

300℃

Build Surface Type

Smooth & Textured PEI

Build Plate Material

PEI, Spring Steel

View on Amazon: UniTak3D 257x257mm Double-Sided PEI Build Plate Affiliate link

The UniTak3D plate offers a double-sided build surface with smooth and textured PEI coatings. It measures 257 by 257 mm, fitting most Bambu Lab printers. The textured side resists heat up to 300°C and provides strong adhesion without glue. The smooth side reaches 200°C and works best with PLA. You get a versatile sheet for various materials like ABS, PETG, and Nylon.

Pros

• Double-sided design with smooth and textured PEI surfaces
• Textured side withstands temperatures up to 300°C
• Compatible with 257x257mm platforms on Bambu Lab printers
• Strong adhesion on textured side without needing glue

Cons

• Smooth side requires glue sticks for most filaments
• 257x257mm size is smaller than some competitors
• No mention of included leveling tools or accessories

Good fit if

• You print with Bambu Lab printers like the X1C or P1S
• You want textured adhesion for difficult materials like Nylon
• You need a replacement plate for a 257x257mm bed

Skip if

• You use a printer with a larger build volume
• You prefer automatic adhesion without applying glue
• You need a plate for non-Bambu Lab printers

Verdict: UniTak3D Double-Sided PEI Plate 257mm is a solid upgrade for Bambu Lab owners who need reliable adhesion for engineering materials. It fits users who print Nylon or ABS and want textured grip.

5 Best budget

SAHVAIM 257x257mm Smooth and Textured PEI Plate

Best for: Dual-surface printing on compact Bambu Lab beds

Primary Material

Spring steel

Dimensions

257x257mm

Maximum Temperature

300 °C

Build Surface Type

Smooth PEI, Textured PEI

Build Plate Material

PEI, Spring Steel

View on Amazon: SAHVAIM 257x257mm Smooth and Textured PEI Plate Affiliate link

This SAHVAIM build plate offers a dual-sided design with smooth and textured PEI surfaces on a spring steel base. It measures 257x257mm, fitting Bambu Lab printers like the X1C, P1S, and A1. The textured side resists heat up to 300°C, while the smooth side handles 200°C. You get strong adhesion for materials like PLA, PETG, and Nylon, with easy print removal once cooled.

Pros

• Dual-sided PEI surface for smooth or textured finishes
• Spring steel base for flexibility and easy part removal
• Textured side withstands temperatures up to 300°C
• Compatible with 257x257mm Bambu Lab printer beds

Cons

• Smaller 257x257mm footprint compared to 315x310mm options
• Requires disabling build plate detection on X1 series printers
• Cannot use acetone for cleaning textured surfaces

Good fit if

• You want both smooth and textured finishes on one plate
• You print high-temperature materials like Nylon or ABS
• You use a 257x257mm Bambu Lab printer

Skip if

• You need a larger 315x310mm build area
• You want to keep X1 series detection features enabled
• You prefer cleaning with acetone

Verdict: SAHVAIM 257x257mm Double-Sided PEI Plate fits users who want versatile surface options and high heat resistance on a compact bed. It is a solid upgrade for Bambu Lab owners who print diverse materials and value easy part removal.

6 Best premium

Creality K1 Max 315x310mm Smooth PEI Build Plate

Best for: Creality K1 Max users needing large smooth builds

Primary Material

Spring steel

Dimensions

315x310mm

Build Surface Type

Smooth PEI

View on Amazon: Creality K1 Max 315x310mm Smooth PEI Build Plate Affiliate link

This Creality build plate features a 315x310mm smooth PEI surface bonded to a high-strength spring steel core. It is designed for the K1 Max, K2 Pro, and Ender 3 V3 Plus. The flexible steel allows you to remove prints by bending. Double handles protect your hands, and the R-angle edges add safety. It fits beds with matching positioning holes.

Pros

• 315x310mm large build area
• Smooth PEI surface for fine detail
• High-strength spring steel prevents deformation
• Flexible design aids print removal
• Double handles for safe handling

Cons

• Requires specific printer models with matching positioning holes
• Not compatible with magnetic base systems
• Smooth finish may need surface prep for some materials

Good fit if

• You own a Creality K1 Max or K2 Pro
• You need a larger 315x310mm build volume
• You prefer smooth surface finishes for detailed prints

Skip if

• You use a printer with a different bed size
• You require a magnetic base attachment system
• You prefer textured surfaces for easy release

Verdict: Creality K1 Max Smooth PEI Sheet offers a large 315x310mm area with a reliable smooth finish for compatible Creality printers. It is ideal for users who need extra build space and precise detail on models.

7

IdeaFormer-3D 257x257mm PEO and Textured PEI Plate

Best for: Dual-surface printing on compact beds

Primary Material

Spring steel

Dimensions

257x257mm

Build Surface Type

Smooth PEO, Textured PEI

Build Plate Material

PEI, Spring Steel, PEO

Weight

12.3 ounces

View on Amazon: IdeaFormer-3D 257x257mm PEO and Textured PEI Plate Affiliate link

This IdeaFormer-3D build plate offers a double-sided surface for Bambu Lab printers. You get a smooth PEO side for mosaic patterns and a textured PEI side for frosted finishes. The spring steel base ensures high flatness and flexibility for easy model removal. It fits 257x257mm platforms, matching the Centauri Carbon size. You can print PLA, PETG, ABS, and TPU effectively with this versatile sheet.

Pros

• Double-sided design with smooth PEO and textured PEI surfaces
• Spring steel construction provides high flatness and flexibility
• Supports a wide range of filaments including ABS and TPU
• Strong adhesion at 60°C without needing glue or tape

Cons

• Smaller 257x257mm size compared to the 315x310mm Creality plate
• Requires enclosure or glue for high-temperature ABS printing
• Heavier 12.3 ounces than some thinner alternatives

Good fit if

• You want two distinct surface finishes on one plate
• You print with flexible materials like TPU or PETG
• You use a Bambu Lab printer with a 257x257mm bed

Skip if

• You need a larger build area for big models
• You frequently print large ABS parts without an enclosure
• You prefer a lighter build plate for faster handling

Verdict: IdeaFormer-3D 257x257mm PEO+PEI Plate suits users who value surface versatility over maximum build volume. It is a solid choice for makers printing diverse materials on compact beds.

Specifications side by side

Frequently asked questions

See also

• elegoo centauri carbon 2 combo 3d printer alternatives
• cusimax hot plate alternatives