Aorita3D 280x200mm 0.3mm ACF Release Review (2026): A Spec-Based Look

What stands out

• ACF release film type for improved durability
• Dimensions of 280 by 200 by 0.3 millimeters
• Maximum temperature resistance of 260 degrees Celsius
• Lower release force for quieter and faster peeling
• Packaged as a 2-piece set for wider coverage

Who it fits

Key specs explained

Dimensions: 280*200*0.3mm

This listing provides two sheets measuring 280 by 200 millimeters. The 0.3-millimeter thickness defines the build area size for your resin tank. You need this exact footprint to fit machines like the Elegoo Saturn 2 or Anycubic Mono X. If your printer uses a larger screen, such as the Saturn 4 Ultra, this size will not cover the entire build surface. Check your printer manual for the correct screen dimensions before ordering.

Film Thickness: 0.3mm

The film is 0.3 millimeters thick. This specific thickness helps create a uniform bottom layer for your prints. It balances flexibility with durability, allowing the film to peel away from cured resin without tearing too easily. Thinner films might wear out faster, while thicker ones can sometimes cause adhesion issues. This thickness is standard for high-quality replacement sheets in the resin printing market.

Release Film Type: ACF

This product uses ACF material, which stands for Acrylic Copolymer Film. It is distinct from standard nFEP sheets. ACF offers higher toughness and better durability, meaning you can print more models before needing to replace the film. It also provides a smoother surface finish on the bottom of your prints. If you are tired of changing films frequently, this material type is a practical upgrade for your workflow.

Maximum Temperature: 260 °C

The film can withstand temperatures up to 260 degrees Celsius. This heat resistance ensures the sheet does not warp or degrade during long print sessions. UV lamps and ambient heat can stress standard films, but this rating provides stability. It allows you to run your printer for extended periods without worrying about the film melting or losing its release properties. This makes it suitable for demanding projects that require long print times.

Design and build specs

The listing describes this item as an ACF release film, which the attributes also categorize under the broader FEP type. According to the listing, the material is built for higher toughness and durability than standard nFEP films. This means you can print more models before needing to replace the sheet. The film handles heat up to 260 °C, with a melting point of 305 °C. This stability helps maintain print quality over long sessions.

The dimensions are fixed at 280 by 200 millimeters, with a thickness of 0.3 millimeters. You must match these exact measurements to your printer’s tank. The listing states it fits Elegoo Saturn series models, Anycubic Mono X and related units, and several Halot and Proxima machines. If your printer requires a different footprint, this specific size will not work. The pack contains two sheets, giving you a backup for when the first one wears out.

The design focuses on quick release. According to the listing, the release force is smaller than nFEP, allowing resin models to detach faster. This also results in quieter operation during printing. The smoother surface aims to improve print accuracy. You get a straightforward replacement part with no electronic components or complex layout. It is purely a consumable sheet designed to fit into your existing resin tank setup.

Setup and daily use

Installing this film requires matching the 280 by 200 millimeter dimensions to your printer’s resin tank. The 0.3-millimeter thickness ensures the build area aligns correctly with your machine’s specifications. You must verify compatibility with supported models such as the Elegoo Saturn series, Anycubic Mono X, or Halot Sky. The listing notes it works with various Proxima and Flashforge devices as well. Proper installation is critical for the ACF material to function as intended.

Daily use benefits from the film’s higher heat resistance. The listing states it withstands temperatures up to 260 degrees Celsius, with a melting point of 305 degrees Celsius. This stability allows for consistent performance during long print jobs without deformation. The ACF construction offers better durability than standard nFEP films. You can print high-quality models multiple times before needing to replace the sheet. This reduces the frequency of maintenance and material changes.

The release force is lower than that of nFEP alternatives. This characteristic allows resin models to detach from the film more quickly. The listing also mentions quieter operation during the peeling process. These factors contribute to a smoother printing experience. The improved toughness aims to create more accurate and smoother prints. You benefit from a greater success rate due to the material’s strength. The film’s design supports efficient workflow by minimizing interruptions for replacements. This setup ensures reliable performance for compatible resin 3D printers.

Owning this release film

You will need to keep a spare film on hand. The listing states the ACF material offers better durability than standard nFEP, but resin exposure still degrades any sheet. You should monitor print quality for layer adhesion issues or model sticking. If you notice defects, replace the film immediately. This product is a consumable, not a permanent part. You must verify your printer model against the supported list. The 280 by 200 millimeter size fits specific Elegoo Saturn and Anycubic Mono series machines. Do not assume it works with all resin printers. Check your tank dimensions carefully. If you print frequently, buying the two-pack is practical. You save time on ordering replacements. This item belongs in your maintenance kit. It complements your printer but does not replace it. You need resin, a scraper, and IPA for cleaning. Keep this film in a cool, dry place. Heat and humidity can affect the material before you install it. Ensure your printer’s UV intensity is stable. High heat resistance helps, but proper care extends life. This sheet supports smoother releases and quieter operation. It helps you maintain consistent print success rates. You get two sheets, which allows for backup storage. This is a simple, spec-driven purchase for resin users.

Check before you buy

• Verify your printer model is in the supported list.
• Confirm your resin tank matches the 280 by 200 mm size.
• Check if you need a backup sheet for frequent printing.
• Ensure you have cleaning supplies like IPA and scrapers.

The product at a glance

1

Aorita3D 280x200mm 0.3mm ACF Release Film

Best for: Elegoo Saturn and Anycubic Mono printer owners

Dimensions

280*200*0.3mm

Maximum Temperature

260 °C

Release Film Type

ACF

Film Thickness

0.3mm

Resolution

8K

View on Amazon: Aorita3D 280x200mm 0.3mm ACF Release Film Affiliate link

This is a pack of two ACF release films sized 280 by 200 mm with a thickness of 0.3 mm. The material offers high heat resistance up to 260 °C and a melting point of 305 °C. It features lower release force for faster, quieter printing. You should choose this film if you use compatible Elegoo or Anycubic printers and want a durable, high-success-rate printing surface.

Pros

• ACF film type provides higher printing success rates
• Heat resistance up to 260 °C for stable long-term use
• Lower release force allows faster and quieter model separation
• Durable construction reduces the need for frequent film changes

Cons

• Limited to 280 by 200 mm size for specific printer models
• Pack contains only two films
• Requires compatible resin printer hardware

Good fit if

• You own an Elegoo Saturn or Anycubic Mono series printer
• You need replacement films for 280 by 200 mm build areas
• You want a durable film that lasts longer than standard nFEP

Skip if

• You use a printer with a different build area size
• You require a single film pack for immediate one-off use
• You need a film with a different thickness specification

Verdict: Aorita3D 280x200mm ACF Release Film suits users of specific large-format resin printers who need durable, heat-resistant films for consistent results.

Specifications side by side

Frequently asked questions

See also

• aorita3d 2pcs 280 200 alternatives
• best Aorita3D resin 3d printer accessories
• jbl quantum 200 review
• nzxt kraken 280 review