Aorita3D 280x200mm 0.3mm ACF Release Alternatives: 6 Similar Picks Compared

How each alternative compares

ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP

The ELEGOO Saturn 2 and 3 Metal Resin Tank differs significantly by offering a complete metal vat rather than just a replacement film. While the Aorita3D film provides a 0.3mm ACF surface for smoother releases, this ELEGOO option includes a sturdy black metal base with a protective lid. It measures 11.5 by 6.79 inches and weighs 2.2 pounds. You get a durable, ready-to-use tank assembly instead of a consumable film sheet. This choice suits Saturn 2 and 3 owners who need a robust structural replacement rather than just a film update. It does not provide the specific ACF heat resistance or quick-release properties of the Aorita3D film, focusing instead on long-term tank durability.

KOYOFEI 200x140mm FEP Release Film 6-Pack

The KOYOFEI 200x140mm FEP Release Film 6-Pack targets a completely different printer size range. While the Aorita3D film measures 280 by 200mm for large format printers, this KOYOFEI option is sized for smaller machines like the ELEGOO Mars series. It comes in a bulk pack of six clear FEP films, offering value through quantity. You get reliable light transmission and a standard FEP surface, but you sacrifice the larger build area and the specific ACF material properties found in the Aorita3D product. This pick is ideal for owners of smaller resin printers who need frequent replacements. It does not fit users requiring the 280 by 200mm dimensions necessary for Saturn series printers.

ELEGOO Mars 4/5 FEP Release Film 5-Pack

The ELEGOO Mars 4/5 FEP Release Film 5-Pack is designed for mid-sized resin printers, not the large format machines supported by the Aorita3D film. This pack contains five standard FEP films sized for the Mars 4, 5, or 5 Ultra. The ELEGOO films are clear and measure 10 by 7.44 inches. You get a convenient multi-pack for regular maintenance, but the build area is significantly smaller than the 280 by 200mm surface of the Aorita3D film. This option gives up the high heat resistance and ACF material benefits for a standard FEP experience tailored to smaller printers. It is the correct choice for Mars series owners but does not serve users of larger Saturn or Mono printers.

ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack

The ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack offers a similar 280 by 200mm footprint to the Aorita3D film, making it compatible with Mono 2 printers. However, it uses standard FEP material rather than the ACF variant found in the Aorita3D product. This pack includes two films that measure 8.66 by 6.3 inches. You get easy installation for standard speed printing, but you miss out on the improved heat resistance and smoother release properties of the ACF material. The ANYCUBIC option is a solid alternative for Mono 2 owners who prefer standard FEP. It does not provide the durability or quick-release advantages that make the Aorita3D film suitable for high-success-rate printing.

ELEGOO Mars 4 Metal Resin Tank with FEP

The ELEGOO Mars 4 Metal Resin Tank with FEP is a structural replacement part, not a consumable film. It features a robust metal base with a protective lid, measuring 10 by 6.93 inches and weighing significantly more than a film sheet. While the Aorita3D film offers a 0.3mm ACF surface for better print quality, this ELEGOO tank focuses on stability and durability for Mars 4 users. You get a complete, ready-to-use tank assembly instead of a replacement film. This choice suits owners who need a sturdy base rather than a surface upgrade. It does not provide the specific ACF release characteristics or the large 280 by 200mm build area of the Aorita3D film.

CHINDRAG Mono 2 and 4 Integrated FEP Film

The CHINDRAG Mono 2 and 4 Integrated FEP Film is designed for Anycubic Mono 2 and Mono 4 printers. It provides a high-transmittance FEP surface with a focus on quick installation and bulk replacement. Unlike the Aorita3D film, which uses ACF material for superior heat resistance and release, this CHINDRAG option relies on standard FEP technology. You get a convenient solution for Mono series owners, but you sacrifice the specific material benefits and the large 280 by 200mm dimensions. This pick is ideal for users who prioritize ease of installation and standard performance. It does not match the durability or print quality enhancements offered by the Aorita3D ACF film.

Quick picks

Our 7 picks

1 Best overall

Aorita3D 280x200mm 0.3mm ACF Release Film

Best for: Elegoo Saturn series resin printing

Dimensions

280*200*0.3mm

Maximum Temperature

260 °C

Release Film Type

ACF

Film Thickness

0.3mm

Resolution

8K

View on Amazon: Aorita3D 280x200mm 0.3mm ACF Release Film Affiliate link

This is a pack of two ACF release films sized 280x200mm with 0.3mm thickness. The material offers high heat resistance up to 260°C and lower release force than standard nFEP. These specs help you print smoother models with fewer failures. It fits Elegoo Saturn series and Anycubic Mono X printers. You get durable films that last longer than basic options.

Pros

• ACF film type for smoother prints
• Heat resistance up to 260°C
• Lower release force than nFEP
• Durable for repeated use

Cons

• Limited to 280x200mm size
• 0.3mm thickness may not suit all printers
• No mention of included scraper or tools

Good fit if

• You use Elegoo Saturn series printers
• You want higher heat resistance
• You prefer smoother print surfaces

Skip if

• You need larger 310x220mm films
• You use smaller Mars printers
• You prefer standard nFEP films

Verdict: Aorita3D 280x200mm ACF Release Film suits users who need reliable heat resistance and smoother prints for Saturn series printers. It delivers consistent results for those who value durability over size variety.

2 Best premium

ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP

Best for: Saturn 2 and 3 owners needing a metal tank

Primary Material

Anodized aluminum

Dimensions

292.8*172.4*33mm

Release Film Type

FEP

Printing Technology

LCD

Color

Black

Weight

2.2 pounds

View on Amazon: ELEGOO Saturn 2 and 3 Metal Resin Tank with FEP Affiliate link

This is a replacement resin vat for the Saturn 2 and Saturn 3 printers. It features an anodized aluminum build for durability and comes with a pre-installed FEP film. The metal construction resists wear better than plastic alternatives. It includes a lid to block UV light and dust. You need this if your original tank is damaged or if you want to swap resin colors quickly without cleaning.

Pros

• Anodized aluminum construction for long-term durability
• FEP film pre-installed for immediate use
• Includes a lid to protect against dust and UV light
• Bottom feet keep the FEP film off the workbench

Cons

• Limited to Saturn 2 and Saturn 3 models
• Single tank only, not a multi-pack
• Heavier than standard plastic resin tanks

Good fit if

• You own a Saturn 2 or Saturn 3 printer
• You want a durable metal replacement tank
• You need to switch resin colors quickly

Skip if

• You use an Elegoo Mars series printer
• You need a tank for a Saturn 4 model
• You prefer a lightweight plastic vat

Verdict: ELEGOO Saturn 2/3 Metal Resin Tank is a sturdy, metal replacement vat for Saturn 2 and Saturn 3 users who need a durable, ready-to-use tank with a protective lid.

3 Best budget

KOYOFEI 200x140mm FEP Release Film 6-Pack

Best for: bulk replacement for smaller resin printers

Dimensions

140 x 200 x 0.15mm

Release Film Type

FEP

Film Thickness

0.15mm

Printing Technology

Resin

Resolution

4K

Width

5.51 inches

View on Amazon: KOYOFEI 200x140mm FEP Release Film 6-Pack Affiliate link

This is a 6-pack of KOYOFEI FEP release films designed for resin 3D printers. The sheets measure 140 by 200 millimeters with a thickness of 0.15mm. They offer 95% light transmission and feature a low-friction, non-stick surface. The pack includes clear films with printed instructions for replacement. This set suits users who need a higher quantity of replacement films for compatible ELEGOO and Anycubic printers.

Pros

• Includes 6 FEP films for extended use
• 95% light transmission for stable UV curing
• Low-friction non-wettable surface for easy release
• Heat-resistant and durable construction

Cons

• 140x200mm size is smaller than the 280x200mm films listed
• 0.15mm thickness may wear faster than thicker options
• Limited compatibility with larger printer models

Good fit if

• You print with ELEGOO Mars or Anycubic Photon Mono series
• You prefer buying in bulk to save on replacements
• You need films for smaller build volume printers

Skip if

• You use printers requiring 280x200mm or larger films
• You prefer thicker films for longer durability
• You only need a single replacement film

Verdict: KOYOFEI 140x200mm FEP Film 6-Pack is a practical bulk option for owners of smaller resin printers like the ELEGOO Mars series. It offers good value through quantity and reliable light transmission, but the smaller size excludes users of larger machines.

4 Also great

ELEGOO Mars 4/5 FEP Release Film 5-Pack

Best for: ELEGOO Mars 4/5/5 Ultra owners

Dimensions

206*146mm

Release Film Type

FEP

Film Thickness

0.15mm

View on Amazon: ELEGOO Mars 4/5 FEP Release Film 5-Pack Affiliate link

This is a five-pack of FEP release films designed for ELEGOO Mars 4, Mars 5, and Mars 5 Ultra printers. The films measure 206 by 146 millimeters with a thickness of 0.15 millimeters. They offer 95% UV light transmittance for accurate curing. The surface is smooth and non-stick to help models release easily. You get five clear films in this package.

Pros

• Includes 5 replacement films for better value
• 95% UV light transmittance for faster curing
• 0.15mm thickness for durability and clarity
• Non-stick surface prevents resin adhesion
• Compatible with Mars 4, 5, and 5 Ultra

Cons

• Smaller film size than the 280x200mm ACF alternatives
• Thinner 0.15mm film may wear faster than thicker options
• Limited to ELEGOO Mars 4/5 series printers only

Good fit if

• You own an ELEGOO Mars 4, 5, or 5 Ultra printer
• You prefer the standard 206x146mm build volume
• You want a five-pack of replacement films

Skip if

• You need films for larger 280x200mm printers
• You use a printer brand other than ELEGOO
• You require thicker films for extended durability

Verdict: ELEGOO 5-Pack FEP Film for Mars 4/5 is the correct replacement for owners of ELEGOO Mars 4, 5, or 5 Ultra printers who need standard-sized films. It does not fit users requiring larger build areas.

5 Also great

ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack

Best for: Anycubic Photon Mono 2 standard speed prints

Release Film Type

FEP

Dimensions

8.66 × 6.3 × 0.75 inches

View on Amazon: ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack Affiliate link

This is a 2-pack of FEP release films for Anycubic Photon Mono 2 and Mono 4 printers. The films measure 8.66 by 6.3 inches with a 0.75-inch height. You get a ring included for quick installation. The process takes about 3 minutes. This kit suits users who want a straightforward replacement. It helps maintain print quality through regular film changes.

Pros

• Includes 2 FEP films per package
• Compatible with Photon Mono 2 and Mono 4
• Ring included for 3-minute installation
• Dimensions match 280x200mm build volume

Cons

• Not supported for fast printing on Mono 4 series
• Requires adjusting speed to normal for Mono 4 Ultra
• Only contains 2 films instead of 5 or 6

Good fit if

• You own an Anycubic Photon Mono 2
• You prefer a quick 3-minute installation process
• You want a 2-pack for occasional replacements

Skip if

• You use a fast printing Mono 4 model
• You need 5 or more films per pack
• You print with ELEGOO or Mars printers

Verdict: ANYCUBIC 280x200mm FEP Film 2-Pack is a solid option for Mono 2 owners. It offers easy installation for standard speed printing.

6 Best lcd

ELEGOO Mars 4 Metal Resin Tank with FEP

Best for: Mars 4 users needing a durable metal tank

Primary Material

aluminum alloy

Release Film Type

FEP

Printing Technology

LCD

Dimensions

10 × 6.93 × 2.8 inches

View on Amazon: ELEGOO Mars 4 Metal Resin Tank with FEP Affiliate link

This ELEGOO resin tank is built for the Mars 4 LCD printer. It features an aluminum alloy construction for durability and stability. The FEP release film is pre-installed, saving you setup time. The tank includes feet to keep the build plate level and clean. It measures 209 by 140 by 32.8 mm. This unit works with all resin types, making it a versatile upgrade for your printer.

Pros

• Aluminum alloy construction for sturdy durability
• FEP release film pre-installed
• Feet keep film off workbench
• Works with all resin types

Cons

• Specific to Mars 4 printer model
• Requires Allen wrenches for installation
• Limited to one tank size

Good fit if

• You own an ELEGOO Mars 4 printer
• You want a durable metal tank
• You prefer pre-installed FEP film

Skip if

• You use a different printer brand
• You need a larger build volume
• You want plastic tank options

Verdict: ELEGOO Metal Resin Tank for Mars 4 offers a robust metal base for users who prioritize stability and durability. It is the right choice for Mars 4 owners seeking a reliable, ready-to-use replacement tank.

7 Also great

CHINDRAG Mono 2 and 4 Integrated FEP Film

Best for: Anycubic Mono 2 and Mono 4 owners

Dimensions

197x131x0.15mm

Maximum Temperature

204°C

Release Film Type

FEP

Film Thickness

0.15mm

Printing Technology

Resin

View on Amazon: CHINDRAG Mono 2 and 4 Integrated FEP Film Affiliate link

This CHINDRAG FEP film is designed for the Anycubic Photon Mono 2 and Mono 4 resin printers. It features a 0.15mm thickness and a 197x131mm size. The integrated design includes a ring for quick installation without cutting. It offers over 95% light transmittance and withstands temperatures up to 204°C. You get five pieces per pack. This option suits users who want a hassle-free replacement that maintains stable UV exposure for consistent prints.

Pros

• Integrated design with ring for easy installation
• High transmittance of over 95%
• Heat resistant up to 204°C
• Includes 5 films per package

Cons

• Specific to Anycubic Mono 2 and Mono 4 models
• Thinner 0.15mm film may be less durable than thicker options
• Limited to two printer model variations

Good fit if

• You own an Anycubic Photon Mono 2 or Mono 4 printer
• You prefer an integrated film with a pre-attached ring
• You need a higher quantity of replacement films

Skip if

• You use an Elegoo or AnyCubic Photon Mono 3 printer
• You require a thicker 0.3mm film for durability
• You only need a single replacement film

Verdict: CHINDRAG FEP Film for Anycubic Mono 2/4 provides a convenient, high-transmittance solution for owners of the Mono 2 and Mono 4 printers who value quick installation and bulk replacement packs.

Specifications side by side

Frequently asked questions