Shion.Kwoo 257x257mm Double-Sided Textured PEI Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for shion kwoo 257x257mm bambu lab x2d alternatives to replace your current build surface. The original Shion.Kwoo plate offers a double-sided textured PEI design on a spring steel base. It measures 257.5 x 257.5 mm and weighs 8.8 ounces. This setup provides strong adhesion for PLA, ABS, and PEEK without needing glue. The textured side helps prints stick, while the flexible steel allows easy removal by bending the plate.
You might want a different option if you need a smooth finish, a different size, or a specific brand. Some users prefer dual-finish plates that combine textured and smooth surfaces for versatility. Others may seek higher temperature resistance for engineering materials or aesthetic options like rainbow PEY. We selected these alternatives because their specifications overlap with the original product. Each pick fits the 257x257mm bed size and supports Bambu Lab printers. This list helps you compare build plate materials, surface finishes, and dimensions to find the best fit for your printing needs.
Our top pick: Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate.
Comparing PEI Build Plate Alternatives
BIQU 257x257mm PEO and PEI Build Plate
The BIQU option distinguishes itself by pairing PEO on one side with textured PEI on the other. While the Shion.Kwoo plate uses two textured PEI surfaces, this BIQU model offers a smooth PEO finish for flat, glossy prints alongside the textured side. Both share the 257x257mm size and spring steel base. You gain versatility in surface finish without changing plates. The trade-off is managing two different material properties. If you print varied filament types and want distinct bottom finishes, this dual-surface approach is practical. It fits Bambu Lab X2D users who need both adhesion and smoothness in one flexible sheet.
Wefuit 257x257mm Smooth and Textured PEI Sheet
Wefuit provides a double-sided PEI plate with one smooth and one textured side. This differs from the Shion.Kwoo model, which features textured surfaces on both sides. You get the flexibility to choose between easy removal on the textured side and flat bottom prints on the smooth side. Both plates use spring steel and measure 257x257mm. The Wefuit design suits users who switch between standard PLA and engineering materials that need different surface treatments. It is a practical alternative if you find the double-textured Shion.Kwoo plate limits your finish options. The spring steel base ensures consistent flexibility for part removal.
SAHVAIM 257x257mm Smooth and Textured PEI Plate
SAHVAIM offers a 257x257mm plate with a smooth PEI side and a textured PEI side. Unlike the Shion.Kwoo plate, which has textured surfaces on both sides, this model gives you a smooth option for flat-bottom prints. The textured side supports high-temperature filaments up to 300 °C, while the smooth side handles up to 200 °C. Both use spring steel bases. This design is ideal if you need distinct thermal handling for different materials. You gain surface variety without buying multiple plates. The trade-off is managing two different temperature ranges. It is a strong choice for Bambu Lab users who print both technical and standard filaments.
IdeaFormer-3D 257x257mm PEO and Textured PEI Plate
IdeaFormer-3D presents a plate with smooth PEO on one side and textured PEI on the other. The Shion.Kwoo plate uses textured PEI on both sides. This IdeaFormer model adds a smooth PEO finish, which is useful for prints requiring a flat, glossy bottom. Both plates are 257x257mm and use spring steel. You gain the ability to switch between mosaic-like PEO prints and durable textured PEI prints. The weight is slightly higher at 12.3 ounces compared to the Shion.Kwoo 8.8 ounces. This option suits users who value aesthetic variety and easy removal. It is a practical dual-surface solution for standard filament printing.
IdeaFormer-3D 257x257mm PEI Cool Plate
The IdeaFormer-3D PEI Cool Plate is designed specifically for PLA printing with lower heat requirements. Unlike the Shion.Kwoo double-sided textured plate, this option focuses on efficiency and reduced warping for PLA. It features a double-sided PEI design but is optimized for cooler bed temperatures. The 257x257mm size matches the original. You gain better performance for PLA with less maintenance and warping. The trade-off is limited suitability for high-temperature materials like ABS or PEEK. This plate is best for users who primarily print PLA and want to minimize heat exposure. It offers a specialized solution for common filament types.
IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate
IdeaFormer-3D offers a Rainbow PEY and Textured PEI plate. This differs from the Shion.Kwoo model by adding a visual PEY side for aesthetic prints alongside the durable textured PEI side. Both plates are 257x257mm and use spring steel. You gain the ability to create colorful, rainbow-finish prints while retaining high-temperature capability for technical materials. The weight is 12.3 ounces, slightly heavier than the Shion.Kwoo plate. This option suits users who value visual flair in their prints. It is a practical dual-surface choice for Bambu Lab owners who want both artistic results and functional durability in one flexible build surface.
Quick picks
Our 7 picks
Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate
Best for: Bambu Lab X2D users needing textured adhesion
- Primary Material
- Stainless spring steel
- Dimensions
- 257x257 mm
- Maximum Temperature
- 300°C
- Build Surface Type
- Textured PEI
- Build Plate Material
- PEI, Spring Steel
- Build Plate Size
- 257x257mm
View on Amazon: Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate Affiliate link
This Shion.Kwoo build plate measures 257.5 x 257.5 mm and features a textured PEI surface on a spring steel base. The double-sided design allows you to flip the sheet when one side wears out. It fits Bambu Lab X2D, X1, P1P, P1S, and A1 printers. You get strong adhesion for materials like PLA and ABS without needing extra adhesives. The gold-colored sheet weighs 8.8 ounces.
Pros
- Double-sided textured PEI surface for extended use
- Spring steel base provides flexibility for easy print removal
- Compatible with Bambu Lab X2D, X1, P1P, P1S, and A1
- No glue or paper required for standard filament adhesion
Cons
- Textured surface may leave a rough finish on prints
- Requires isopropyl alcohol for cleaning
- Not suitable for printers with build areas larger than 257.5 x 257.5 mm
Good fit if
- You want a durable, double-sided replacement for your Bambu Lab printer
- You print with PLA or ABS and need reliable adhesion
- You prefer textured surfaces for easier part removal
Skip if
- You need a smooth surface for high-detail aesthetic prints
- Your printer build area exceeds 257.5 x 257.5 mm
- You require a plate with integrated heating elements
Verdict: Shion.Kwoo 257x257mm Textured PEI Plate offers a practical, double-sided solution for Bambu Lab users who prioritize adhesion and durability. It fits perfectly if you need a reliable replacement for your X2D or X1 series printer.
BIQU 257x257mm PEO and PEI Build Plate
Best for: Dual-finish printing on 257x257mm Bambu Lab beds
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Build Surface Type
- Smooth PEO, textured PEI
- Build Plate Material
- PEI, Spring Steel, PEO
View on Amazon: BIQU 257x257mm PEO and PEI Build Plate Affiliate link
This BIQU plate offers a double-sided design for 257x257mm Bambu Lab printers. One side features smooth PEO for diamond patterns, while the other provides textured PEI for standard prints. The spring steel base ensures high flatness and stability. It uses magnetic adhesion for easy print removal. You get two surfaces in one tool, reducing the need to swap plates frequently for different finish requirements.
Pros
- Double-sided surface with smooth PEO and textured PEI
- 257x257mm size fits Bambu Lab P1P, P1S, P2S, X2D, X1C, X1E, and A1
- Spring steel base provides high flatness and temperature stability
- Magnetic attachment allows easy bending and print removal
Cons
- Requires disabling build plate detection on P2S and X2D models
- Only includes one surface finish type per side, limiting simultaneous multi-finish printing
- No QR code integration mentioned for tracking or identification
Good fit if
- You want both smooth and textured finishes without buying two plates
- You print on Bambu Lab models with 257x257mm beds
- You prefer magnetic plates for easy model removal
Skip if
- You use printers with different bed sizes like A1 Mini or Kobra 3
- You need automatic build plate detection without manual configuration changes
- You require QR code tracking for plate management
Verdict: BIQU Designer Series 257x257mm PEO+PEI Plate suits users who need versatile surface finishes on compatible Bambu Lab printers. It delivers reliable adhesion and flatness for both diamond and textured patterns.
Wefuit 257x257mm Smooth and Textured PEI Sheet
Best for: High-temp printing with dual surface options
- Primary Material
- spring steel
- Dimensions
- 256x256mm
- Maximum Temperature
- 300℃
- Build Surface Type
- smooth and textured PEI
- Build Plate Material
- PEI, Spring Steel
View on Amazon: Wefuit 257x257mm Smooth and Textured PEI Sheet Affiliate link
This double-sided PEI sheet offers both smooth and textured surfaces on a 257x257mm spring steel base. It handles temperatures up to 300°C, supporting materials like ABS, Nylon, and PC. The textured side provides strong adhesion, while the smooth side allows easy part removal. It fits Bambu Lab X2D, P2S, P1P, P1S, X1, and A1 models. You get two finishes in one flexible plate.
Pros
- Dual-sided design with smooth and textured PEI surfaces
- High temperature resistance up to 300°C
- Flexible spring steel base for easy part removal
- Compatible with multiple Bambu Lab printer models
Cons
- Only one surface type per plate, not interchangeable
- No QR code integration for printer recognition
- Requires cooling before removal to protect coating
Good fit if
- You want both smooth and textured finishes in one plate
- You print high-temperature materials like Nylon or PC
- You use a Bambu Lab X2D, P2S, or X1
Skip if
- You need a plate with integrated QR code tracking
- You prefer a single-surface plate for simplicity
- You print only low-temperature materials like PLA
Verdict: JUUPINE 257x257mm Double-Sided PEI suits users who need versatility in surface finish and high-temperature capability for engineering materials. It is a practical option for Bambu Lab owners seeking a durable, flexible build plate.
SAHVAIM 257x257mm Smooth and Textured PEI Plate
Best for: dual-finish printing on Bambu Lab beds
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Maximum Temperature
- 300 °C
- Build Surface Type
- Smooth PEI, Textured PEI
- Build Plate Material
- PEI, Spring Steel
View on Amazon: SAHVAIM 257x257mm Smooth and Textured PEI Plate Affiliate link
This 257x257mm spring steel sheet gives you two distinct surfaces for your Bambu Lab printer: smooth PEI on one side and black textured PEI on the other. The smooth side handles temperatures up to 200 °C for matte base finishes, while the textured side withstands up to 300 °C. It suits you if you want both flat and textured bottom layers from one sheet.
Pros
- Dual-sided design with smooth PEI on one face and textured PEI on the reverse
- Textured PEI surface withstands platform temperatures up to 300 °C
- Spring steel core flexes to release printed parts upon cooling
- Compatible with 257x257mm Bambu Lab beds including X1, P1, and A1 series
Cons
- Smooth PEI surface is rated to a lower maximum temperature of 200 °C
- Requires disabling build plate position detection on X1-series printers
- Surface cannot be cleaned with acetone without damaging the PEI coating
Good fit if
- You want both a smooth matte base and a textured finish on a single plate.
- You run engineering filaments like nylon or ASA up to 300 °C on the textured side.
- You print on a 257x257mm Bambu Lab machine such as an A1, P1S, or X1C.
Skip if
- You rely on automatic build plate position detection on Bambu Lab X1-series printers.
- You require printing temperatures above 200 °C on the smooth surface.
Verdict: SAHVAIM 257x257mm Smooth and Textured PEI Plate suits Bambu Lab users who need dual-finish flexibility on a single spring steel sheet. It gives you a 300 °C textured side for technical filaments alongside a 200 °C smooth side for flat-bottom prints.
IdeaFormer-3D 257x257mm PEO and Textured PEI Plate
Best for: Switching between mosaic and frosted prints
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Build Surface Type
- Smooth PEO, Textured PEI
- Build Plate Material
- PEI, Spring Steel, PEO
- Weight
- 12.3 ounces
View on Amazon: IdeaFormer-3D 257x257mm PEO and Textured PEI Plate Affiliate link
This IdeaFormer-3D build plate offers a 257x257mm printing area on a 12.3-ounce spring steel base. You get two distinct surfaces: a smooth PEO side for mosaic patterns and a textured PEI side for frosted finishes. It works with Bambu Lab printers like the X2D and P2S. The flexible sheet allows easy model removal when cooled. You can print PLA, PETG, ABS, and more on the textured side.
Pros
- Double-sided design with smooth PEO and textured PEI surfaces
- Compatible with Bambu Lab X2D, X1C, X1, P1P, P1S, P2S, and A1
- Spring steel construction provides flexibility for easy part removal
- Good adhesion for first layers at 60°C without glue
Cons
- Smooth PEO side is limited to PLA, TPU, and PETG
- High-temperature filaments like ABS may require an enclosure or glue
- No included QR code for printer identification
Good fit if
- You want to switch between mosaic and frosted finishes
- You print PLA and PETG frequently
- You need a flexible plate for easy removal
Skip if
- You primarily print high-temperature materials like PC or Nylon
- You prefer a single-sided plate
- You need automatic QR code scanning for bed leveling
Verdict: IdeaFormer-3D PEO+PEI Double-Sided Plate is a practical option for users who want two finishes in one plate. It fits Bambu Lab owners who print mostly standard filaments and value easy removal.
IdeaFormer-3D 257x257mm PEI Cool Plate
Best for: PLA printing with lower heat settings
- Dimensions
- 257x257mm
- Build Surface Type
- PEI Cool Plate
- Compatible Material
- PLA
View on Amazon: IdeaFormer-3D 257x257mm PEI Cool Plate Affiliate link
This IdeaFormer-3D build plate uses an enhanced PEI coating designed for lower operating temperatures. It measures 257x257mm, fitting Bambu Lab X2D, X1, and P1 series printers. The surface supports PLA at 30–50°C, PETG at 50–70°C, and ABS at 70–90°C. You get a double-sided plate that reduces warping on large prints. It eliminates the need for glue or frequent cleaning.
Pros
- Operates 10–20°C lower than standard PEI plates
- Strong PLA adhesion at 30–50°C
- Double-sided design for extended use
- No glue or frequent cleaning required
Cons
- Incompatible with TPU filament
- Cannot use organic solvents like acetone for cleaning
- Limited temperature range for high-temp materials
Good fit if
- You print mostly PLA models
- You want to reduce energy use
- You dislike cleaning build plates often
Skip if
- You print with TPU filament
- You need high-temperature ABS performance
- You prefer standard hot plates
Verdict: IdeaFormer-3D PEI Cool Plate 257x257mm is a specialized plate for users who prioritize PLA printing efficiency and lower heat requirements. It suits those who want to minimize warping and maintenance without sacrificing adhesion quality.
IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate
Best for: users wanting aesthetic PEY prints with PEI durability
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Maximum Temperature
- 180℃ (PEY), 260℃ (PEI)
- Build Surface Type
- Smooth rainbow PEY, textured PEI
- Build Plate Material
- PEI, Spring Steel
- Weight
- 12.3 ounces
View on Amazon: IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate Affiliate link
This IdeaFormer-3D build plate features a double-sided design with a smooth rainbow PEY side and a textured PEI side. It fits 257x257mm printers like the Bambu Lab X2D and X1C. The PEY side handles up to 180℃, while the PEI side withstands 260℃. You get a spring steel base for flexibility. It supports various filaments including PLA, ABS, and TPU. This plate suits users who want aesthetic prints alongside reliable adhesion.
Pros
- Double-sided design offers rainbow PEY and textured PEI surfaces
- PEI side supports temperatures up to 260℃ for engineering materials
- Compatible with Bambu Lab X2D, X1C, X1, P1S, P2S, and A1
- Spring steel base provides flexibility for easy part removal
Cons
- PEY side maximum temperature is limited to 180℃
- Starry pattern on PEY side can fade if wiped with oily objects
- Requires thorough cleaning with isopropyl alcohol between prints
Good fit if
- You want a unique rainbow starry pattern for PLA or TPU prints
- You need a high-temperature surface for ABS or PC on the same plate
- You print on a 257x257mm Bambu Lab machine
Skip if
- You require a single-sided plate without aesthetic patterns
- You frequently print materials needing temperatures above 180℃ on the PEY side
- You prefer a standard black PEI surface without texture variations
Verdict: IdeaFormer-3D Rainbow PEY+PEI Plate delivers a dual-surface solution for 257x257mm Bambu Lab printers. It fits users who value visual flair on the PEY side while retaining the high-temperature capability of PEI for technical materials.
Specifications side by side
| Spec | Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate | BIQU 257x257mm PEO and PEI Build Plate | Wefuit 257x257mm Smooth and Textured PEI Sheet | SAHVAIM 257x257mm Smooth and Textured PEI Plate | IdeaFormer-3D 257x257mm PEO and Textured PEI Plate | IdeaFormer-3D 257x257mm PEI Cool Plate | IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate |
|---|---|---|---|---|---|---|---|
| Primary Material | Stainless spring steel | Spring steel | spring steel | Spring steel | Spring steel | not stated | Spring steel |
| Dimensions | 257x257 mm | 257x257mm | 256x256mm | 257x257mm | 257x257mm | 257x257mm | 257x257mm |
| Maximum Temperature | 300°C | not stated | 300℃ | 300 °C | not stated | not stated | 180℃ (PEY), 260℃ (PEI) |
| Build Surface Type | Textured PEI | Smooth PEO, textured PEI | smooth and textured PEI | Smooth PEI, Textured PEI | Smooth PEO, Textured PEI | PEI Cool Plate | Smooth rainbow PEY, textured PEI |
| Compatible Material | not stated | not stated | not stated | not stated | not stated | PLA | not stated |
| Color Effect | not stated | not stated | not stated | not stated | not stated | not stated | Rainbow |
| Build Plate Material | PEI, Spring Steel | PEI, Spring Steel, PEO | PEI, Spring Steel | PEI, Spring Steel | PEI, Spring Steel, PEO | PEI | PEI, Spring Steel |
| Build Plate Size | 257x257mm | 257x257mm | not stated | 257x257mm | 257x257mm | 257x257mm | 257x257mm |
| Surface Finish | Textured | Smooth, Textured | Smooth, Textured | Smooth, Textured | Smooth, Textured | not stated | Textured |
| Weight | 8.8 ounces | not stated | not stated | not stated | 12.3 ounces | not stated | 12.3 ounces |
| Size | 257x257mm-pei | P1/P2/X1/A1/X2D | For X2D/P2S/P1P/P1S/A1/X1/X1C/X1E | 257x257mm | 257x257mm | 257x257mm | For Bambu X2D/X1/X1C/X1E/P1P/P1S/P2S/A1 |
| Color | Gold | PEO+PEI-Black/Gold | PEI Smooth+PEI Textured | Smooth PEI+Textured PEI(Black) | Smooth PEO+Textured PEI | Cool Plate (Double Sided) | PEY+PEI(Starry PEY+Textured PEI) |
| Model | x1-2 | not stated | not stated | not stated | RC-257 | not stated | PEY-257 |
Frequently asked questions
Which build plate offers the best textured adhesion for Bambu Lab X2D?
The Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate is the top choice for users needing strong, consistent adhesion. It features a gold-colored PEI surface on a spring steel base. This design ensures reliable print results for standard and engineering filaments. The plate fits perfectly on X2D and X1 series printers without modification.
Can I get a smooth finish alongside textured adhesion on one plate?
Several options provide dual finishes on a single 257x257mm sheet. The BIQU 257x257mm PEO and PEI Build Plate pairs a smooth PEO side with a textured PEI side. This allows you to switch between glossy, flat-bottom prints and textured, easy-release surfaces. It is ideal for users who need versatility in their print jobs.
What is the best budget-friendly dual-finish build plate?
The SAHVAIM 257x257mm Smooth and Textured PEI Plate is the best budget option. It offers a textured side rated for 300 °C for technical filaments and a smooth side for 200 °C materials. This spring steel plate provides dual-finish flexibility without a premium price. It is a practical choice for Bambu Lab owners on a budget.
Is there a build plate specifically designed for PLA printing?
Yes, the IdeaFormer-3D 257x257mm PEI Cool Plate is designed for PLA. It prioritizes printing efficiency with lower heat requirements to minimize warping. This specialized plate reduces maintenance while maintaining strong adhesion for standard PLA filaments. It is a double-sided option that suits users who want to optimize their PLA print settings.
Can I print with rainbow aesthetic effects using PEI durability?
The IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate delivers visual flair with technical performance. It features a Starry PEY side for rainbow aesthetic prints and a textured PEI side for durability. This combination allows you to create visually striking models while retaining the high-temperature capability of PEI for engineering materials.
Which plate is best for switching between mosaic and frosted prints?
The IdeaFormer-3D 257x257mm PEO and Textured PEI Plate is best for switching between finishes. It combines smooth PEO for mosaic-style prints with textured PEI for frosted results. This double-sided design fits Bambu Lab owners who print mostly standard filaments. It values easy removal and versatile surface options in a single 257x257mm sheet.
Does the Wefuit plate support high-temperature engineering materials?
The Wefuit 257x257mm Smooth and Textured PEI Sheet supports high-temperature printing. It offers dual surface options on a spring steel base for engineering materials. This practical option suits Bambu Lab owners seeking a durable, flexible build plate. It provides versatility in surface finish while maintaining the structural integrity needed for demanding print jobs.