ANYCUBIC 10.1-Inch ACF High-Speed Film vs ANYCUBIC Photon P1 Heated Resin: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the anycubic 5pcs 10 1 inch acf high vs photon p1 intelligent 3d for resin printing needs. Both items support resin printing technology. The main difference lies in their design and film type. One is a pack of high-speed ACF films for specific mono printers. The other is a complete heated resin vat with auto-adaptive temperature control for the Photon P1 printer. You need to match the part to your specific machine model.
Key differences
| Aspect | Anycubic 10.1-Inch ACF High-Speed Film | ANYCUBIC Photon P1 Heated Resin Vat |
|---|---|---|
| Product Type | Replacement film pack | Complete resin vat |
| Compatible Printer | Photon Mono M5s/M5s Pro, M7 Pro | Photon P1 |
| Film Type | ACF | NFEP |
| Temperature Control | Not listed | Auto-Adaptive Heating |
| Quantity | 5 pieces | 1 vat |
Which one should you choose?
Choose Anycubic 10.1-Inch ACF High-Speed Film if
- You own a Photon Mono M5s, M5s Pro, or M7 Pro printer.
- You need replacement films for fast resin printing.
- You want a pack of five films for long-term maintenance.
Choose ANYCUBIC Photon P1 Heated Resin Vat if
- You own a Photon P1 printer.
- You need a heated vat for optimal resin temperature.
- You want a pre-installed NFEP film ready for use.
Verdict: Choose the ACF film pack if you have a Mono M5 series printer and need consumables. Choose the Photon P1 heated vat if you own that specific printer and want integrated temperature control. The correct part depends entirely on your printer model.
Film Type and Build Comparison
Release Film Type
The ANYCUBIC 10.1-Inch ACF High-Speed Film uses an ACF release film. This type is designed for high-speed printing with specific Anycubic resins. In contrast, the ANYCUBIC Photon P1 Heated Resin Vat comes with an NFEP film pre-installed. NFEP is a standard material for resin vat bottoms. ACF films generally offer higher light transmittance and durability for fast printing cycles. NFEP films are common but may wear out faster at high speeds. If you prioritize print speed and film longevity, the ACF option is better. If you want a ready-to-use vat with standard film, the P1 is the choice.
Dimensions and Size
The ANYCUBIC 10.1-Inch ACF High-Speed Film has specific dimensions of 278x190mm. It is a flat film component, not a full vat. The ANYCUBIC Photon P1 Heated Resin Vat is a complete unit. Its dimensions are listed as 2.05 inches in width and height, with a length of 8.74 inches. These measurements likely refer to the packaging or specific internal parts, not the full vat footprint. The film is a consumable part for the M5s/M5s Pro or M7 Pro. The P1 vat is for the Photon P1 printer. You cannot directly compare physical size as one is a film and the other is a tank. The film fits specific larger printers, while the P1 vat fits its specific model.
Temperature Control
The ANYCUBIC Photon P1 Heated Resin Vat features dynamic temperature control. It adjusts the resin material temperature to maintain optimal printing conditions. This helps ensure successful prints by keeping resin viscosity stable. The ANYCUBIC 10.1-Inch ACF High-Speed Film does not have temperature control features. It is a passive film component. It relies on the printer's heating system if available. The P1 vat includes this heating capability in its design. If you need consistent resin temperature without relying on external factors, the P1 vat is superior. The film offers no thermal management features.
Compatibility
The ANYCUBIC 10.1-Inch ACF High-Speed Film is only suitable for Anycubic Photon Mono M5s, M5s Pro, and Photon Mono M7 Pro printers. It must be paired with Anycubic's high-speed resin. The ANYCUBIC Photon P1 Heated Resin Vat is designed specifically for the Photon P1 intelligent 3D printer. These two products are not interchangeable. They serve different printer models. You must check your printer model before purchasing. The film is for larger format printers, while the P1 vat is for the P1 model. Compatibility is strictly defined by the manufacturer for each item.
Packaging and Quantity
The ANYCUBIC 10.1-Inch ACF High-Speed Film comes in a package of 5 pieces. It is a consumable item that requires regular replacement. The release film on the bottom of the resin vat has an outer protective layer that must be removed before installation. The ANYCUBIC Photon P1 Heated Resin Vat comes with the release film pre-installed. It is a single unit intended as a spare tank or for fast color changes. The film pack offers multiple replacements. The P1 vat offers a complete, ready-to-use tank. You get more units with the film pack, but the P1 vat is a complete functional component.
Which resin film fits your print
Users with M5s or M7 Pro printers
This film is designed for Photon Mono M5s, M5s Pro, and M7 Pro models. It features a 0.3mm thickness and 95% light transmittance. You get five pieces in the package. The ACF type supports high-speed printing when paired with Anycubic fast resin. Ensure you remove the protective layer before installation for best results.
Owners of the Photon P1 printer
This vat is made specifically for the Photon P1. It includes an NFEP film pre-installed. The dynamic temperature control keeps resin at optimal printing temperatures. It helps ensure successful prints by maintaining heat. You can use it as a spare tank to swap colors quickly without cleaning the main vat.
Printers seeking consistent temperature control
Temperature stability is key for resin quality. This heated vat adjusts the material temperature automatically. It maintains optimal conditions for successful printing. The pre-installed NFEP film saves setup time. You avoid potential issues from manual film installation. This integrated approach supports reliable performance during your print jobs.
The products compared
Anycubic 10.1-Inch ACF High-Speed Film
Best for: Anycubic M5s/M7 Pro resin printing
- Dimensions
- 278x190(mm)
- Release Film Type
- ACF
- Film Thickness
- 0.3mm
- Printing Technology
- Resin
- Features
- High Speed
- Resolution
- 12K, 14K
View on Amazon: Anycubic 10.1-Inch ACF High-Speed Film Affiliate link
This is a pack of five 10.1-inch ACF release films designed for Anycubic Photon Mono M5s, M5s Pro, and M7 Pro printers. The films measure 278x190mm with a 0.3mm thickness and offer approximately 95% light transmittance. You need these consumables to maintain print quality. Regular replacement ensures consistent performance. This set suits users who print frequently with compatible high-speed resin machines.
Pros
- Includes five 10.1-inch films for extended use
- 95% light transmittance supports high-speed printing
- 0.3mm thickness ensures precise layer adhesion
- Compatible with Photon Mono M5s and M7 Pro
Cons
- Requires compatible Anycubic high-speed resin
- Consumable item needs regular replacement
- Protective layer must be removed before installation
Good fit if
- You own an Anycubic Photon Mono M5s or M7 Pro
- You print with high-speed resin regularly
- You need spare films for maintenance
Skip if
- You use a different printer brand
- You print with standard resin only
- You need a single replacement film
Verdict: Anycubic 10.1-inch ACF High-Speed Film provides reliable replacement parts for compatible Anycubic printers. You should buy this pack if you want to maintain optimal print quality with high-speed resins.
ANYCUBIC Photon P1 Heated Resin Vat
Best for: Photon P1 owners needing a spare tank
- Release Film Type
- NFEP
- Printing Technology
- Resin
View on Amazon: ANYCUBIC Photon P1 Heated Resin Vat Affiliate link
This is the replacement resin tank for the Anycubic Photon P1 printer. It features a pre-installed NFEP release film and dynamic temperature control to maintain optimal resin heat. The barrel includes a maximum capacity mark to prevent overflow. It serves as a practical spare tank for quick color changes during printing projects.
Pros
- NFEP release film pre-installed
- Dynamic temperature control system
- Marked maximum capacity level
- Designed for fast color changes
Cons
- Requires Anycubic Photon P1 printer
- No mention of included resin
- Limited to single tank capacity
Good fit if
- You need a spare tank for the Photon P1
- You want to switch resin colors quickly
- You need a pre-installed NFEP film
Skip if
- You own a different Anycubic model
- You need a tank for other printers
- You want a standalone printer unit
Verdict: Anycubic Photon P1 Resin Vat is a direct replacement part for the Photon P1 printer. It fits users who need a spare tank for quick color changes or a reliable backup with pre-installed film.
Specifications side by side
| Spec | Anycubic 10.1-Inch ACF High-Speed Film | ANYCUBIC Photon P1 Heated Resin Vat |
|---|---|---|
| Dimensions | 278x190(mm) | not stated |
| Release Film Type | ACF | NFEP |
| Film Thickness | 0.3mm | not stated |
| Printing Technology | Resin | Resin |
| Features | High Speed | not stated |
| Resolution | 12K, 14K | not stated |
| Size | 10.1'' | not stated |
Frequently asked questions
Can I use the 10.1-inch ACF film on the Photon P1 printer?
No, that film is not designed for the Photon P1. The ANYCUBIC 10.1-Inch ACF High-Speed Film is specifically built for the M5s, M5s Pro, and M7 Pro models. The Photon P1 requires its own compatible tank or film. Using the wrong film may result in poor print quality or damage to the printer screen.
What size is the replacement film included with the Photon P1 vat?
The provided data does not list the specific dimensions for the film pre-installed in the Photon P1 Heated Resin Vat. It only confirms the vat itself is a direct replacement part for that printer. You should check the printer manual or product packaging for the exact film size required for the Photon P1 tank.
How many pieces come in the Anycubic 10.1-inch film pack?
The package contains five pieces of the 10.1-inch ACF High-Speed Film. This quantity allows you to have backups ready for quick changes. It is helpful for maintaining consistent print quality when using high-speed resins with compatible Anycubic printers like the M5s or M7 Pro.
Is the Photon P1 vat compatible with other Anycubic printers?
The product description identifies the Photon P1 Heated Resin Vat as a direct replacement part specifically for the Photon P1 printer. There is no information suggesting it fits other models like the M5s or M7 Pro. You should verify compatibility with your specific printer model before purchasing.
What is the difference between ACF and NFEP films?
ACF film is designed for high-speed printing with specific Anycubic resins, as seen in the 10.1-inch pack. The Photon P1 vat comes with an NFEP film pre-installed. These films have different optical properties and durability. You must use the film type recommended for your specific printer and resin to get the best results.
Does the Photon P1 heated vat come with a new film installed?
Yes, the Photon P1 Heated Resin Vat arrives with a film pre-installed. This feature allows for quick color changes or serves as a reliable backup. You do not need to purchase a separate film immediately if you buy the vat, making it a convenient replacement part for owners.
Which printer should I buy this 10.1-inch film for?
You should buy this film for Anycubic M5s, M5s Pro, or M7 Pro resin printers. It is not intended for the Photon P1. Ensuring you have the correct film for your machine helps maintain optimal print quality and prevents potential issues with high-speed resin printing.