Best ANYCUBIC 3d Printer Accessories: 15 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right ANYCUBIC 3d printer accessory depends on matching exact hardware dimensions and machine models to your setup. ANYCUBIC offers components across resin and filament lines, including 10.1-inch ACF and FEP films, direct-fit printheads, build platforms, monitoring cameras, and heated resin vats in black and white finishes.
The Anycubic 10.1-Inch ACF High-Speed Film takes the top position because its 0.3 mm high-transmittance sheets deliver direct-fit maintenance for high-speed workflows on Photon Mono M5s and M7 Pro printers. This guide compares 15 products using only the specifications published on their listings to help you select compatible parts.
Quick picks
Our 15 picks
Anycubic 10.1-Inch ACF High-Speed Film
Best for: Photon Mono M5s and M7 Pro owners
- Dimensions
- 278x190(mm)
- Release Film Type
- ACF
- Film Thickness
- 0.3mm
- Printing Technology
- Resin
- Features
- High Speed
This five-pack provides 10.1-inch ACF release films designed for high-speed resin 3D printing. Each sheet measures 278 by 190 millimeters with a 0.3-millimeter thickness and roughly 95 percent light transmittance. These replacement films suit you if you operate compatible Anycubic resin printers like the Photon Mono M5s, M5s Pro, or Photon Mono M7 Pro and want direct-fit consumable replacements ready for maintenance.
Pros
- Pack includes 5 individual release film sheets
- High light transmittance rated at approximately 95%
- 0.3 mm thickness paired with 278 x 190 mm dimensions
- Engineered for high-speed resin 3D printing
Cons
- Only compatible with Photon Mono M5s, M5s Pro, and Photon Mono M7 Pro
- Requires removing an outer protective layer before installation
Good fit if
- You own a Photon Mono M5s, M5s Pro, or Photon Mono M7 Pro
- You need multiple 10.1-inch ACF film replacements for high-speed resin printing
Skip if
- You print with models outside the specified M5s or M7 Pro series
- You need film for different vat dimensions or standard FEP requirements
Verdict: ANYCUBIC 10.1-Inch ACF Release Film 5-Pack delivers direct-fit 0.3 mm high-transmittance sheets for owners of compatible M5s and M7 Pro resin printers. It gives you multiple maintenance replacements specifically sized for fast resin workflows.
ANYCUBIC Kobra 3 Printhead Assembly
Best for: Kobra 3 and Kobra 3 V2 replacements
- Color
- Black
- Dimensions
- 5.12 × 7.48 × 5.63 inches
- Weight
- 1.1 pounds
This black replacement printhead assembly measures 7.48 by 5.63 by 5.12 inches and weighs 1.1 pounds. It fits Anycubic Kobra 3, Kobra 3 Combo, Kobra 3 V2, and Kobra 3 V2 Combo 3D printers. The unit installs in minutes with guided video support. You get a direct factory component match if your current toolhead requires replacement, keeping your machine aligned without complex mechanical modifications.
Pros
- Compatible with Kobra 3, Kobra 3 Combo, Kobra 3 V2, and Kobra 3 V2 Combo
- Weighs 1.1 pounds with 7.48 by 5.63 by 5.12-inch dimensions
- Includes detailed installation videos for quick assembly
Cons
- Incompatible with Anycubic Kobra 3 Max printers
- Restricted to specific standard Kobra 3 series models
Good fit if
- You own a standard Kobra 3, Kobra 3 Combo, or Kobra 3 V2 printer.
- You need a fast, factory-matched replacement toolhead.
Skip if
- You run an Anycubic Kobra 3 Max printer.
- You use resin printers or earlier Kobra generations.
Verdict: ANYCUBIC Kobra 3 Printhead Assembly provides a direct drop-in replacement for standard Kobra 3 series setups, though it will not mount to Kobra 3 Max frames.
Anycubic Kobra 3 Max Printhead Assembly
Best for: Kobra 3 Max printhead replacements
- Color
- Black
This replacement printhead assembly is built specifically for your ANYCUBIC Kobra 3 Max or Kobra 3 Max Combo 3D printer. Constructed with industrial-grade materials, it supports rapid print speeds and high filament flow rates on the Kobra 3 platform. The unit comes pre-calibrated to match these machines directly. It suits you if you need a direct manufacturer replacement to restore factory print operation without custom wiring or modifications.
Pros
- Supports high-speed printing and high flow rates on the Kobra 3 platform
- Engineered specifically for Kobra 3 Max and Kobra 3 Max Combo
- Constructed from industrial-grade wear-resistant materials
- Includes manufacturer step-by-step installation video guides
Cons
- Only compatible with Kobra 3 Max and Kobra 3 Max Combo models
- Only available in black
Good fit if
- You own an ANYCUBIC Kobra 3 Max or Kobra 3 Max Combo printer.
- You need a factory-calibrated printhead assembly that supports high-speed printing.
- You want a drop-in replacement supported by official video guides.
Skip if
- You own a standard Kobra 3 or a non-Max ANYCUBIC printer.
- You only need to replace a single sub-component rather than the entire assembly.
Verdict: ANYCUBIC Kobra 3 Max Printhead Assembly provides a direct factory replacement built for high flow rates and rapid movement on matching machines. It restores original hardware performance without setup guesswork on your Kobra 3 Max setup.
ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack
Best for: Photon Mono 2 and 4 routine vat maintenance
- Release Film Type
- FEP
- Dimensions
- 8.66 × 6.3 × 0.75 inches
View on Amazon: ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack
This two-piece replacement release film set is built for your ANYCUBIC Photon Mono 2, Mono 4, or Mono 4 Ultra resin vat. Each sheet includes an integrated ring, letting you swap films in roughly three minutes without cutting material or taking rings apart. It uses standard FEP material measuring 8.66 by 6.30 inches. If you run a Mono 4 series printer, you must use normal rather than high-speed printing modes.
Pros
- Includes two pre-mounted FEP release films
- Integrated ring eliminates manual cutting and ring disassembly
- Installs in approximately three minutes using the package guide
- Directly compatible with Photon Mono 2, Mono 4, and Mono 4 Ultra
Cons
- Does not support fast printing modes on Mono 4 series printers
- Limited compatibility to Photon Mono 2 and Mono 4 series vats
Good fit if
- You own an ANYCUBIC Photon Mono 2, Mono 4, or Mono 4 Ultra printer.
- You want pre-assembled release films that do not require cutting or ring disassembly.
- You run standard print speeds rather than high-speed print profiles.
Skip if
- You need high-speed release film for rapid printing profiles on the Mono 4 series.
- You use a resin printer model outside the Photon Mono 2 or Mono 4 lineup.
Verdict: ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack delivers an easy, ring-mounted vat film replacement for everyday printing speeds. It saves maintenance time on supported Mono printers by removing the need for manual alignment and trimming.
ANYCUBIC Kobra USB Monitoring Camera
Best for: Anycubic Kobra remote print monitoring
- Features
- Built-in Camera
The ANYCUBIC Kobra USB Monitoring Camera is an add-on optical sensor designed to track your print jobs. It connects through a standard USB interface to Anycubic Kobra 3, Kobra 2 series, Klipper setups, or standard computers. By pairing with the Anycubic APP, you can watch real-time feeds to catch layer adhesion defects or filament jams from anywhere. It suits you if you want plug-and-play remote monitoring and an interchangeable frame you can customize.
Pros
- Direct USB interface connection with quick setup
- Compatible with Kobra 3, Kobra 2 series, Klipper systems, and computers
- Enables real-time remote monitoring through the Anycubic APP
- Replaceable exterior frame allows custom DIY designs
Cons
- Exact numerical resolution and frame rate are not provided in specifications
- Limited to a 3-month product service period
Good fit if
- You run an Anycubic Kobra 3, Kobra 2 series, or Klipper-based printer
- You want remote video monitoring via the Anycubic APP to track print progress
- You prefer a direct USB connection with a replaceable frame design
Skip if
- You require specific numerical sensor specs such as 1080p or 4K
- You operate standalone printers without compatible USB or Klipper connectivity
Verdict: ANYCUBIC Kobra USB Monitoring Camera provides plug-and-play monitoring capability across compatible Kobra and Klipper setups using a simple USB interface. It lets you monitor progress via mobile app to detect layer adhesion and filament feed issues early.
ANYCUBIC Kobra 3 Monitoring Camera
Best for: remote print monitoring on Kobra series printers
- Features
- Built-in Camera
- Color
- Black
This black add-on camera provides real-time video monitoring for your 3D printing setup. Designed to work directly with the Anycubic APP, it lets you check print progress remotely to spot layer adhesion defects and filament jams early. The hardware supports the Kobra 3, Kobra 2 series, Klipper-based machines, and standard computers. It also includes a customizable outer frame design that you can replace with your own 3D printed enclosures.
Pros
- Remote monitoring via the Anycubic APP
- Works with Kobra 3, Kobra 2 series, Klipper printers, and computers
- Replaceable frame supports custom 3D-printed designs
- Enables early detection of filament jams and layer adhesion issues
Cons
- Exact pixel resolution and frame rate not specified
- Does not list compatibility with Photon resin printers
Good fit if
- You run an Anycubic Kobra 3, Kobra 2, or Klipper-based 3D printer.
- You want to monitor printing progress remotely through the Anycubic APP.
- You like designing and mounting custom 3D-printed camera frames.
Skip if
- You need a camera confirmed for Anycubic Photon series resin printers.
- You require explicit numerical specs like 1080p or 4K resolution before buying.
Verdict: ANYCUBIC Kobra 3 Monitoring Camera provides dedicated remote video tracking through the Anycubic APP across Kobra and Klipper systems. It gives you an easy way to catch print failures early while allowing frame customization.
ANYCUBIC Mini Air Purifier and Resin Heater
Best for: heating and filtering cold resin printer enclosures
- Printing Technology
- Resin
- Color
- White
- Dimensions
- 9.05 × 8.07 × 4.33 inches
- Weight
- 1.45 pounds
This 2-in-1 accessory combines a 55W resin chamber heater with an activated carbon air purifier in a white fireproof enclosure. It features a digital temperature sensor accurate to 0.1 °C and automatically regulates output once the ambient enclosure hits 40 °C. You can run the heating and odor filtration systems together or independently. It suits you if you operate resin printers in work areas cooler than 25 °C.
Pros
- 55W heating system with automatic power adjustment at 40 °C
- Chamber temperature sensor accurate to 0.1 °C
- Replaceable activated carbon cartridge runs independently for odor control
- Engineered fireproof shell rated for continuous operation down to 0 °C
Cons
- Measures 9.05 by 8.07 inches, requiring adequate clearance inside printer covers
- Consumable activated carbon filter cartridges require ongoing replacement
Good fit if
- You print resin in work environments below 25 °C
- You want real-time chamber temperature readings accurate to 0.1 °C
- You need activated carbon odor filtration alongside active chamber heating
Skip if
- You run filament-based FDM printers instead of resin models
- You lack the interior clearance needed for its 9.05 by 8.07 inch footprint
Verdict: ANYCUBIC Mini Air Purifier and Resin Heater stabilizes chamber temperatures with a 55W heating element and filters odors via activated carbon. It is a practical dual-function upgrade for cold-room resin printing.
ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat
Best for: Photon Mono M7 owners swapping resin colors
- Primary Material
- Metal
- Release Film Type
- ACF
- Printing Technology
- Resin
View on Amazon: ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat
This is a metal resin vat designed for the 10.1-inch ANYCUBIC Photon Mono M7 and M7 Pro resin 3D printers. It features pre-installed ACF film, an inclined pour spout to minimize spills, and internal maximum capacity indicators. You can keep this unit on hand as a spare tank to swap resin colors quickly without cleaning out your primary vat between consecutive prints.
Pros
- Metal tank construction with factory pre-installed ACF film
- Inclined pour spout designed to prevent spills when emptying resin
- Maximum fill line indicator to prevent vat overflow
- Direct fit for 10.1-inch Photon Mono M7 and M7 Pro setups
Cons
- Pre-installed film does not support fast printing modes
- Fits only Photon Mono M7 and M7 Pro printers
Good fit if
- You run an ANYCUBIC Photon Mono M7 or M7 Pro printer.
- You swap resin colors often and need an extra tank ready to go.
- You want a factory metal vat with pre-mounted ACF release film.
Skip if
- You intend to use high-speed resin printing profiles on this tank.
- You print on a different ANYCUBIC model or screen dimension.
Verdict: ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat serves as a ready-to-mount replacement or secondary vat for fast material rotations. It integrates a dedicated pour spout and capacity guide, though its included ACF sheet is not rated for fast printing.
ANYCUBIC Photon P1 Heated Resin Vat
Best for: Photon P1 owners wanting heated resin swaps
- Release Film Type
- NFEP
- Printing Technology
- Resin
This replacement material vat is designed specifically for your ANYCUBIC Photon P1 printer. It features dynamic temperature control heating to keep your resin at a consistent printing temperature. The tank includes a pre-installed NFEP release film and clear maximum capacity markings to prevent liquid overflow. It works well if you want a dedicated spare tank for swapping colors quickly without having to drain and clean resin between jobs.
Pros
- Dynamic auto-adaptive temperature control heating
- Pre-installed NFEP release film
- Max capacity marking to prevent overflow
- Enables quick color swaps as a spare tank
Cons
- Compatible only with the Photon P1 printer
- No storage lid or vat cover listed
Good fit if
- You print using an ANYCUBIC Photon P1 resin machine.
- You need active vat heating to maintain resin printing temperatures.
- You want a pre-assembled vat to swap resin colors faster.
Skip if
- You own a different ANYCUBIC printer model.
- You only need replacement release film rather than a full vat.
Verdict: ANYCUBIC Photon P1 Heated Resin Vat provides built-in temperature regulation and a factory-fitted NFEP film for the Photon P1. It serves as a dependable drop-in spare to speed up material changes.
ANYCUBIC Kobra 4-in-1 Filament Hub
Best for: multi-color printing on compatible Kobra models
- Dimensions
- 3.54 × 4.72 × 1.18 inches
This feed adapter manages multi-color and multi-material printing on supported FDM machines. It connects 4 separate filament lines into a single extruder feed port, eliminating manual swapping during active print jobs. The compact unit measures 4.72 inches wide, 3.54 inches long, and 1.18 inches high. It snaps directly into place without extra tools, making it a direct upgrade if you own a Kobra 3, Kobra S1, or Kobra 3 Max Combo.
Pros
- Connects up to 4 filaments directly to the extruder feed port
- Tool-free snap-in installation onto the extruder
- Measures 4.72 by 3.54 by 1.18 inches
- Compatible with Kobra 3, Kobra S1, and Kobra 3 Max Combo series
Cons
- Limited to 4 filament feeds at one time
- Incompatible with resin printers and older Kobra models
Good fit if
- You run an Anycubic Kobra 3, Kobra S1, or Kobra 3 Max series printer.
- You want automated multi-material loading without manual filament swaps.
Skip if
- You use an Anycubic Photon resin printer or unsupported FDM machine.
- You require simultaneous feeding for more than 4 spools.
Verdict: ANYCUBIC 4-in-1 Filament Hub provides a tool-free multi-material feed upgrade for compatible Kobra 3 and Kobra S1 printers. It routes 4 lines into the extruder feed port without requiring manual filament changes.
ANYCUBIC Photon Mono 4 Printing Platform
Best for: Photon Mono 4 build plate replacements
- Color
- Black
This is an official ANYCUBIC printing platform designed specifically for the Photon Mono 4 resin 3D printer. It comes in black and serves as a direct replacement build surface or a spare plate to swap between prints. If you run a Photon Mono 4 setup and need a dedicated platform to keep your workflow moving during cleaning cycles, this single accessory matches your machine directly.
Pros
- Designed specifically for the ANYCUBIC Photon Mono 4
- Official ANYCUBIC replacement part
- Finished in black
Cons
- Compatibility limited strictly to the Photon Mono 4
- No extra mounting hardware or leveling tools listed
Good fit if
- You own an ANYCUBIC Photon Mono 4 resin printer.
- You need a replacement or secondary build platform to swap prints.
Skip if
- You operate a different printer model such as the Photon Mono M7 or Kobra series.
- You need resin vats, film, or tools rather than a build plate.
Verdict: ANYCUBIC Photon Mono 4 Printing Platform provides a direct factory build plate replacement in black for your Photon Mono 4 printer. It gives you a dedicated build surface to replace a damaged plate or rotate between print jobs.
ANYCUBIC Photon Mono M7 / M7 Pro Build Platform
Best for: Photon Mono M7 and M7 Pro owners
- Printing Technology
- Resin
- Color
- Black
View on Amazon: ANYCUBIC Photon Mono M7 / M7 Pro Build Platform
This build platform serves as a direct replacement component for your resin 3D printer setup. Designed specifically for the ANYCUBIC Photon Mono M7 and Photon Mono M7 Pro, it features a black finish tailored for resin printing technology. If you need a secondary plate to swap between consecutive prints or want to replace a damaged build surface on an M7 series machine, this dedicated plate gives you an exact hardware match.
Pros
- Direct replacement build platform for Photon Mono M7 and M7 Pro
- Designed specifically for resin printing technology
- Black finish matches original printer styling
Cons
- Compatible only with Photon Mono M7 and M7 Pro printers
- No additional installation tools or hardware listed in specifications
Good fit if
- You own an ANYCUBIC Photon Mono M7 or Photon Mono M7 Pro resin printer.
- You need a spare build platform to start a new job while cleaning another.
- You need an exact replacement for a worn or damaged stock platform.
Skip if
- You use a different ANYCUBIC printer such as the Photon Mono 4 or Kobra line.
- You need resin tank accessories or release films rather than a build plate.
Verdict: ANYCUBIC Photon Mono M7 / M7 Pro Build Platform delivers a dedicated, direct-fit replacement plate for M7 series resin machines. It provides the exact manufacturer build surface needed for seamless parts swaps and repairs.
ANYCUBIC Photon Mono 4 Replacement LCD Screen
Best for: ANYCUBIC Photon Mono 4 screen replacement
- Printing Technology
- LCD
View on Amazon: ANYCUBIC Photon Mono 4 Replacement LCD Screen
This ANYCUBIC replacement LCD screen is built specifically for the Photon Mono 4 3D printer. If your original display stops working or needs maintenance, you can install this component to keep your machine running. Designed for LCD printing technology, it provides the exact replacement screen needed for your Photon Mono 4 setup so you can continue your resin printing tasks without modifying hardware.
Pros
- Built directly for the ANYCUBIC Photon Mono 4
- Serves as a dedicated replacement LCD screen
- Uses standard LCD printing technology
Cons
- Compatible only with the Photon Mono 4 model
- Screen dimensions and resolution are not specified in the data
- Included installation tools are not listed
Good fit if
- You need to replace a damaged or worn screen on an ANYCUBIC Photon Mono 4.
- You want a direct ANYCUBIC replacement part for printer maintenance.
Skip if
- You use a different ANYCUBIC printer like the Photon Mono M7 or Kobra series.
- You require explicit resolution and panel dimension specs before purchasing.
Verdict: ANYCUBIC Photon Mono 4 Replacement LCD Screen serves as a direct replacement component tailored for the Photon Mono 4 printer. It provides the necessary LCD hardware to maintain your machine.
ANYCUBIC Photon Mono 4 Resin Tank with ACF Film
Best for: Fast color swaps on Photon Mono 4
- Release Film Type
- ACF
- Printing Technology
- Resin
View on Amazon: ANYCUBIC Photon Mono 4 Resin Tank with ACF Film
This replacement resin vat is designed specifically for your ANYCUBIC Photon Mono 4 or Mono 4 Ultra 3D printer. It comes with pre-installed ACF release film, eliminating the need for manual cutting or hole punching during setup. The frame includes an integrated pour spout to guide unused resin safely back into containers and a clear fill line to prevent overfilling. It suits you if you need rapid material or color swaps.
Pros
- Pre-installed ACF release film
- Screw-aligned film mounting requires no cutting or drilling
- Inclined pour spout prevents spills during resin drainage
- Maximum capacity fill indicator mark
Cons
- Compatible only with Photon Mono 4 and Mono 4 Ultra printers
- Requires proprietary screw-aligned replacement film format
Good fit if
- You run an ANYCUBIC Photon Mono 4 or Mono 4 Ultra printer.
- You need a dedicated spare tank for rapid color or resin changes.
- You want pre-tensioned ACF film without manual trimming.
Skip if
- You own a different resin printer model outside the Mono 4 series.
- You prefer using third-party sheet film that requires custom trimming.
Verdict: ANYCUBIC Photon Mono 4 Resin Tank with ACF Film provides a dedicated spare vat with pre-mounted ACF film and an integrated pour spout. It streamlines color changes and maintenance for your Photon Mono 4 series printer.
ANYCUBIC Photon P1 Dual-Color Print Kit
Best for: simultaneous multi-material Photon P1 resin printing
- Color Effect
- Dual Color
This official kit equips your Anycubic Photon P1 for simultaneous dual-color or dual-material resin printing. It includes two resin vats with pre-installed release films and two dedicated printing platforms. Maximum capacity indicators on each tank help you prevent overflow during print jobs. If you want to run multi-color or hybrid-material resin prints without manually draining, washing, and swapping materials between jobs, this set gives you the required hardware.
Pros
- Supports simultaneous printing with two distinct colors or materials
- Includes two dedicated resin vats and two printing platforms
- Release films arrive pre-installed on the vats
- Clear maximum capacity markings prevent vat overflow
Cons
- Compatible only with the Anycubic Photon P1
- Requires manual monitoring to stay below maximum resin fill marks
Good fit if
- You own an Anycubic Photon P1 3D printer.
- You want to produce dual-color or dual-material parts without switching resin mid-job.
- You want replacement vats that come with pre-installed release films.
Skip if
- You own a printer model other than the Anycubic Photon P1.
- You only produce single-material and single-color resin prints.
Verdict: ANYCUBIC Photon P1 Dual-Color Print Kit supplies the dual vats and platforms required for multi-material output on the Photon P1. It removes the need to swap resins manually when your projects demand two distinct colors or formulations.
Specifications side by side
| Spec | Anycubic 10.1-Inch ACF High-Speed Film | ANYCUBIC Kobra 3 Printhead Assembly | Anycubic Kobra 3 Max Printhead Assembly | ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack | ANYCUBIC Kobra USB Monitoring Camera | ANYCUBIC Kobra 3 Monitoring Camera | ANYCUBIC Mini Air Purifier and Resin Heater | ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat | ANYCUBIC Photon P1 Heated Resin Vat | ANYCUBIC Kobra 4-in-1 Filament Hub | ANYCUBIC Photon Mono 4 Printing Platform | ANYCUBIC Photon Mono M7 / M7 Pro Build Platform | ANYCUBIC Photon Mono 4 Replacement LCD Screen | ANYCUBIC Photon Mono 4 Resin Tank with ACF Film | ANYCUBIC Photon P1 Dual-Color Print Kit |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Primary Material | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Metal | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Dimensions | 278x190(mm) | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Release Film Type | ACF | not specified | not specified | FEP | not specified | not specified | not specified | ACF | NFEP | not specified | not specified | not specified | not specified | ACF | not specified |
| Film Thickness | 0.3mm | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Printing Technology | Resin | not specified | not specified | not specified | not specified | not specified | Resin | Resin | Resin | not specified | not specified | Resin | LCD | Resin | not specified |
| Features | High Speed | not specified | not specified | not specified | Built-in Camera | Built-in Camera | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Color | not specified | Black | Black | not specified | not specified | Black | White | not specified | not specified | not specified | Black | Black | not specified | not specified | not specified |
| Color Effect | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Dual Color |
| Weight | not specified | 1.1 pounds | not specified | not specified | not specified | not specified | 1.45 pounds | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Size | 10.1'' | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Model | not specified | S010240 | FBA-S010304 | not specified | S010215 | FBA-S010215-NEW-3 | not specified | not specified | not specified | Photon Ultra-FR&220829 | not specified | USS020226-0427 | not specified | not specified | not specified |
The ANYCUBIC Lineup at a Glance
Resin accessories split between standard optical replacements and speed-focused components. If you manage resin printers, items like the Anycubic 10.1-Inch ACF High-Speed Film provide high-transmittance sheets for fast printing workflows. Dedicated spares like the ANYCUBIC Photon Mono 4 Resin Tank with ACF Film add integrated pour spouts to streamline material swaps. This group suits resin users focused on fast layer release and routine vat upkeep.
Filament accessories center on extrusion hardware and multi-material feed management. The ANYCUBIC Kobra 3 Printhead Assembly acts as a direct drop-in toolhead replacement for standard machines. For multi-color printing, the ANYCUBIC Kobra 4-in-1 Filament Hub provides tool-free four-channel feeding. This category suits filament makers repairing worn extruders or configuring multi-material workflows.
Where ANYCUBIC Accessories Fit Your Setup
ANYCUBIC accessories suit owners servicing specific resin and filament hardware. The physical spread runs from a 0.01-pound 4-in-1 filament hub up to a 1.45-pound heated air purifier. Component finishes stick strictly to black and white enclosures. Build surfaces and replacement vats favor rectangular formats matching 10.1-inch or Mono series footprints.
Notable catalog gaps exist across several categories. You find zero dedicated task lighting options or LED illumination upgrades for print chambers. The collection also lacks flexible spring-steel build sheets for Kobra filament printers. Resin film sizes stop at 10.1 inches, leaving ultra-large vat formats unsupported.
If you maintain workshop fabrics alongside your printer setup, you can compare the best carpet cleaner accessories for upholstery using their published attachment specifications.
How to Choose the Right ANYCUBIC Accessories
-
Matching Printing Technology
Identify whether your equipment uses resin vat photopolymerization or filament extrusion. Accessories across these categories do not interchange. Filament printers require hotends, extruders, and material switchers, whereas resin systems need optical vats, replacement screens, and release sheets. If you operate a multi-material filament setup, verify channel numbers on feed units like the ANYCUBIC Kobra 4-in-1 Filament Hub. Selecting the correct printing technology category ensures every replacement part connects directly to your machine mechanical framework and electronic controller without modifications.
-
Selecting Release Film Material
Examine the release film type when maintaining resin vats. Standard FEP film serves standard-speed print routines and provides steady layer peeling across regular jobs. In contrast, ACF film offers specialized high-transmittance material suited for high-speed exposure sequences and rapid lift speeds. You should check whether your vat uses pre-mounted ring brackets or loose film sheets. The ANYCUBIC Photon Mono 2 and 4 FEP Film 2-Pack uses ring mounts to eliminate alignment errors and manual trimming during routine resin tank rebuilds.
-
Verifying Frame Model Boundaries
Confirm the specific model name of your filament printer before picking replacement hardware. While machines within the same generational family share design traits, their core motion parts often differ in physical dimensions and mounting brackets. Standard series toolheads will not bolt directly onto expanded Max frames due to carriage differences. Choosing a dedicated component like the Anycubic Kobra 3 Max Printhead Assembly ensures matching bolt spacing, correct airflow geometry, and high-flow capability tailored to your printer chassis without needing custom adapter plates.
-
Checking Monitoring Interface Compatibility
Review connection options and software requirements before adding an observation camera to your workspace. Most monitoring hardware utilizes a direct USB interface that hooks into Klipper-based mainboards and pairs with mobile companion software. This setup allows you to inspect initial layer adhesion and track continuous extrusion remotely to catch print failures early. If you need dedicated visual verification, the ANYCUBIC Kobra USB Monitoring Camera connects directly to supported Kobra configurations to deliver live video tracking straight to your management software.
-
Regulating Chamber Environment Temperature
Consider environmental controls if you print with resin in unheated rooms or cold workspaces. Photopolymers require stable temperatures to maintain proper viscosity and achieve dependable layer bonding. Checking power ratings helps you determine heating capacity, where a 55W heating element provides active warming inside closed hoods. Dual-purpose hardware like the ANYCUBIC Mini Air Purifier and Resin Heater also incorporates activated carbon media. This combination stabilizes ambient operating temperatures for consistent curing while simultaneously scrubbing processing fumes directly within your enclosure.
-
Confirming Build Platform Dimensions
Match replacement build platforms to your specific machine base rather than estimating across similar screen sizes. Build plates must align with your printer Z-axis mounting bracket, leveling screw layout, and LCD masking dimensions. Using a misaligned plate risks mechanical collisions or uneven pressure across the vat floor. A dedicated part like the ANYCUBIC Photon Mono M7 / M7 Pro Build Platform guarantees factory-calibrated edge margins and proper surface adhesion, allowing you to swap plates between print cycles without reconfiguring leveling settings.
Frequently asked questions
Can you use the standard Kobra 3 printhead on a Kobra 3 Max printer?
No, the ANYCUBIC Kobra 3 Printhead Assembly does not mount to Kobra 3 Max frames. You need the dedicated Kobra 3 Max Printhead Assembly, model FBA-S010304. The standard Kobra 3 unit, model S010240, weighs 1.1 pounds and measures 7.48 by 5.12 by 5.63 inches. It only fits standard Kobra 3 and Kobra 3 V2 setups.
Which printers work with the ANYCUBIC 4-in-1 Filament Hub?
The ANYCUBIC Kobra 4-in-1 Filament Hub works directly with supported Kobra 3 and S1 3D printers. This component, model Photon Ultra-FR&220829, measures 4.72 by 3.54 by 1.18 inches. It provides a tool-free, snap-on adapter that routes four separate filament channels into your extruder setup. You use it to enable multi-material feeding on compatible machines without complex modifications.
What release film comes pre-installed on the Photon P1 Heated Resin Vat?
The ANYCUBIC Photon P1 Heated Resin Vat comes equipped with a factory-fitted NFEP film. This drop-in vat integrates internal temperature regulation hardware to maintain proper resin conditions during printing. It acts as a dedicated replacement container for the Photon P1. You can swap complete resin vats quickly to change liquid materials between print sessions.
Does the ANYCUBIC Photon Mono M7 Metal Resin Vat support high-speed printing?
No, the ACF sheet included with the ANYCUBIC Photon Mono M7 10.1-Inch Metal Resin Vat is not rated for fast printing speeds. If you need high-speed capability, you should install dedicated high-speed film, such as the 0.3 mm 10.1-inch ACF sheets. The metal vat itself includes a built-in pour spout and capacity guide for routine resin handling.
How does the ANYCUBIC Mini Air Purifier and Resin Heater operate?
The ANYCUBIC Mini Air Purifier and Resin Heater uses a 55W heating element combined with an activated carbon filter. This dual-purpose white accessory stabilizes enclosure temperatures in cold workspaces while capturing airborne resin odors. The unit measures 8.07 by 9.05 by 4.33 inches and weighs 1.45 pounds. You position it inside compatible resin printer chambers during operation.
How do you install the FEP film on a Photon Mono 2 or 4?
You install the ANYCUBIC Photon Mono 2 and 4 FEP Film using its integrated mounting ring. This pre-assembled frame eliminates manual alignment and edge trimming during routine vat maintenance. The replacement pack includes two sheets measuring 6.3 by 8.66 by 0.75 inches. It is designed for standard printing speeds on supported Mono 2 and Mono 4 resin machines.
Can ANYCUBIC monitoring cameras be used on third-party Klipper printers?
Yes, both the ANYCUBIC Kobra USB Monitoring Camera and Kobra 3 Monitoring Camera support compatible Kobra and Klipper setups. The standard camera connects via a straightforward USB interface, while the Kobra 3 model operates with the Anycubic APP. Both accessories provide remote print tracking. You can use their video feeds to spot filament feed problems and early bed adhesion failures.