Best 3d Printing Filaments for ABS: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right 3d printing filament for ABS gives your functional parts necessary impact strength and thermal resistance. We evaluated 15 options strictly against the specifications published on their official product listings. ANYCUBIC 1.75mm Grey ABS Filament 1kg earns the top spot because it delivers reliable heat resistance up to 85°C for functional components when paired with a 100°C heated bed.
This guide helps you decide which spool size, temperature threshold, or material blend fits your build volume and hardware setup.
Quick picks
The best fit for you
- You need functional parts with 85°C heat resistance ANYCUBIC 1.75mm Grey ABS Filament 1kg It delivers thermal stability up to 85°C and automated setup for ACE Pro users.
- You need higher thermal resistance up to 102°C SUNLU PC-ABS 1.75mm Filament This PC-ABS blend delivers thermal resistance up to 102°C and high impact tolerance for functional builds.
- You need ABS toughness from a resin 3D printer SUNLU ABS-Like 3D Printer Resin 2000g This SLA resin uses a 405nm curing wavelength to deliver impact resistance and low shrinkage.
- You print at high speeds without an enclosure Creality Hyper ABS 1.75mm Filament It flows fast enough for 350 mm/s operation and delivers 19 kJ/m² impact resistance without an enclosure.
Our 15 picks
ANYCUBIC 1.75mm Grey ABS Filament 1kg
Best for: functional prints needing 85°C heat resistance
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Weight
- 2.2 pounds
This ANYCUBIC spool provides 1kg of 1.75mm grey ABS filament engineered for mechanical parts. It maintains strength and structural form in operating environments up to 85°C and supports anti-warping on print beds measuring 220mm by 220mm heated to 100°C. If you use an ACE Pro unit, built-in intelligent recognition handles material detection directly for your setup.
Pros
- Resists heat and retains structural form up to 85°C
- Integrates intelligent recognition tags for Anycubic ACE Pro systems
- Provides anti-warping performance across a 220mm by 220mm bed at 100°C
- Standard 1kg net weight spool on a 1.75mm diameter format
Cons
- Requires a heated print bed reaching 100°C to limit warping
- Automatic material recognition requires pairing with an ACE Pro unit
Good fit if
- You build functional components requiring heat resistance up to 85°C.
- You run an Anycubic ACE Pro ecosystem for automated material setup.
- You have a printer bed capable of sustaining 100°C across 220mm by 220mm.
Skip if
- You lack a heated print bed that can maintain 100°C.
- You need structural hardware intended for temperatures above 85°C.
Verdict: ANYCUBIC 1.75mm Grey ABS Filament 1kg delivers dependable thermal stability up to 85°C and automated setup for ACE Pro users. It serves practical printing needs when your equipment supports a 100°C bed temperature.
ELEGOO 1.75mm ABS Filament (1 kg)
Best for: heat-resistant functional parts on enclosed printers
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Weight
- 2.2 pounds
ELEGOO 1.75mm ABS Filament (1 kg) gives you a standard 1.75 mm diameter build material designed for high-stress parts. It resists heat up to 85 °C and repels water, making it suitable for functional tools and outdoor enclosures. The spool features mechanical winding to reduce tangles. You need an enclosed 3D printer to use it effectively, making this spool a dependable choice if you produce tough, everyday functional prototypes.
Pros
- Heat resistance up to 85 °C
- Mechanical winding designed to reduce tangling
- Ships in vacuum-sealed packaging
- Available in 1 kg, 2 kg, and 4 kg spool weights
Cons
- Requires an enclosed 3D printer setup
- Manufacturer recommends drying the spool before use
Good fit if
- You print functional parts that must withstand temperatures up to 85 °C.
- You run an enclosed 3D printer set up for 1.75 mm filament.
- You want spool size options ranging from 1 kg up to 4 kg.
Skip if
- You operate an open-frame 3D printer without a dedicated enclosure.
- You want filament that does not require pre-drying before printing.
Verdict: ELEGOO 1.75mm ABS Filament (1 kg) delivers 85 °C thermal resistance and neat mechanical winding for impact-resistant components. It requires an enclosed print chamber and pre-drying to ensure proper results.
Polymaker 1.75mm ABS Filament
Best for: functional mechanical parts and low-odor printing
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensions
- 6.69 × 10.6 × 3.94 inches
- Weight
- 2.2 pounds
This 1.75mm spool from Polymaker is an ABS filament formulated with bulk-polymerized resin for lower odor during printing. It features a 104°C Vicat softening temperature for thermal resistance in mechanical and functional parts. To print it, you need an extruder reaching 245–265°C and a heated bed between 90–100°C. It suits you if you build tools or functional assemblies needing machinability.
Pros
- 104°C Vicat softening temperature for heat resistance
- Formulated with bulk-polymerized resin for lower odor
- Vacuum-sealed packaging includes desiccant
- Available in spool sizes up to 5kg
Cons
- Requires high bed temperatures between 90°C and 100°C
- Needs an enclosed chamber to minimize warping on larger prints
- Requires 6 hours of drying at 70°C if moisture is absorbed
Good fit if
- You need functional parts that withstand temperatures up to 104°C.
- You want an ABS filament formulated for reduced odor during extrusion.
- You have a 3D printer with an enclosed chamber and a 100°C heated bed.
Skip if
- You use an open-frame 3D printer without an enclosure.
- You lack a heated build plate capable of reaching 90–100°C.
Verdict: Polymaker 1.75mm ABS Filament delivers solid heat resistance and reduced odor for functional components. It is a dependable choice if your printer setup meets its high nozzle and bed temperature demands.
SUNLU PC-ABS 1.75mm Filament
Best for: High-temp, impact-resistant parts requiring paint or plating
- Compatible Material
- ABS (what this guide is about)
- Material Type
- PC-ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 230mm/s
- Weight
- 2.2 pounds
SUNLU PC-ABS combines polycarbonate strength with ABS durability on a standard 1kg spool of 1.75mm filament. It withstands temperatures up to 215.6°F (102°C) and handles impacts up to 70 kJ/m². To print it, your machine must reach nozzle temperatures between 260°C and 280°C and heated bed temperatures from 100°C to 110°C with glue. This filament suits you if you need impact-resistant functional prototypes, automotive trims, or parts prepared for plating and painting.
Pros
- Withstands impacts up to 70 kJ/m² and drops up to 10 feet
- Thermal stability up to 215.6°F (102°C) without warping
- Achieves 4B level classification for paint adhesion
- Supports print speeds from 50 to 230 mm/s
Cons
- Requires high nozzle temperatures of 260°C to 280°C
- Bed adhesive like glue or LAC spray is required for printing
- Needs a heated bed running at 100°C to 110°C
Good fit if
- You need high thermal resistance up to 215.6°F (102°C) for functional automotive or outdoor components.
- You plan to paint or electroplate your finished prints without extensive surface prep.
- You have a 3D printer capable of reaching at least 260°C on the nozzle and 100°C on the bed.
Skip if
- You own a 3D printer that cannot heat the hotend to 260°C or the bed to 100°C.
- You prefer printing without bed adhesives such as glue or spray.
Verdict: SUNLU PC-ABS 1.75mm Filament delivers high impact tolerance and thermal resistance up to 102°C for demanding functional models. It requires high nozzle and bed temperatures alongside bed adhesive to print successfully.
SUNLU 1.75mm ABS Filament 1kg
Best for: functional parts requiring tight dimensional accuracy
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 100mm/s
- Dimensional Accuracy
- +/- 0.02mm
SUNLU 1.75mm ABS Filament 1kg is a standard ABS spool designed for FDM 3D printing functional parts. It offers a tight dimensional accuracy of +/- 0.02mm and requires an extruder temperature between 240°C and 270°C paired with a heated bed between 80°C and 120°C. You get a spool with an 8.00-inch diameter and a 2.20-inch hub hole. It suits you if you need heat-resistant prints at print speeds from 50 to 100mm/s.
Pros
- Tight dimensional accuracy of +/- 0.02mm
- Wide recommended print speed range of 50 to 100mm/s
- Standard spool sizing with 8.00-inch diameter and 2.20-inch hub hole
- High heat resistance suitable for functional mechanical components
Cons
- Demands high bed temperatures between 80°C and 120°C
- Requires a hotend capable of reaching 240°C to 270°C
Good fit if
- You have a heated bed capable of sustaining at least 80°C to 120°C.
- You need functional components printed with tight +/- 0.02mm tolerances.
- You want a filament rated for print speeds up to 100mm/s.
Skip if
- You use a 3D printer without an enclosure or high-temperature heated bed.
- Your hotend cannot reliably reach the minimum recommended 240°C.
Verdict: SUNLU 1.75mm ABS Filament 1kg delivers strict dimensional tolerance and reliable high-temperature thermal resistance for functional FDM parts. It is a solid pick if your setup meets the 240°C to 270°C nozzle and 80°C to 120°C bed requirements.
SUNLU PC-ABS Hybrid 1.75mm Filament
Best for: impact-resistant functional parts and high-heat enclosures
- Compatible Material
- ABS (what this guide is about)
- Material Type
- PC-ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 230mm/s
- Weight
- 2.2 pounds
This 1kg spool from SUNLU blends polycarbonate and ABS into a 1.75mm hybrid filament. It features a heat deflection rating of 102°C and an impact strength of 70 KJ/m². You need hardware capable of reaching nozzle temperatures between 260°C and 280°C alongside a heated bed at 100°C to 110°C. It suits you if you make functional prototypes, tool handles, or enclosures requiring thermal stability.
Pros
- 102°C heat deflection temperature
- 70 KJ/m² impact resistance rating
- Print speeds up to 230 mm/s
- Surface finish ready for painting and plating
Cons
- Requires high nozzle temperatures of 260°C to 280°C
- Requires bed adhesive such as glue or spray
- Demands bed temperatures reaching 100°C to 110°C
Good fit if
- You need high impact resistance up to 70 KJ/m² for structural parts.
- You have an extruder capable of sustaining temperatures between 260°C and 280°C.
- You plan to paint or plate your finished prints without heavy prep work.
Skip if
- You own a 3D printer with a hotend capped below 260°C.
- You cannot heat your print bed to at least 100°C.
- You prefer printing without specialized bed adhesives or glue.
Verdict: SUNLU PC-ABS Hybrid 1.75mm Filament delivers high heat deflection and impact toughness for functional engineering builds. It requires capable hotends and bed adhesives to print reliably.
ELEGOO ABS-Like 3.0+ Resin 2000g
Best for: tough, machinable LCD resin 3D printing
- Compatible Material
- ABS (what this guide is about)
- Printing Technology
- Resin
- Color
- Black
- Resin Type
- ABS-Like
This is a 2000g bottle of black ABS-like photopolymer resin designed for LCD resin 3D printers instead of standard filament extruders. It withstands temperatures up to 55 degrees Celsius and produces parts you can drill and tap without cracking. With its low shrinkage and high fluidity, this resin suits you if you need detailed, tough resin prints that mimic ABS mechanical durability.
Pros
- Cured parts can be tapped and drilled without cracking
- Formulated with high fluidity to reduce release force
- Maintains shape and mechanical properties up to 55 degrees Celsius
- Fast curing speed balances printing efficiency with fine detail
Cons
- Requires an LCD resin printer rather than an FDM machine
- Heat deflection limits use to temperatures at or below 55 degrees Celsius
Good fit if
- You run an LCD resin printer and need drillable parts.
- You want a 2000g supply of impact-resistant photopolymer resin.
Skip if
- You own a standard FDM spool filament printer.
- You need parts rated for operating temperatures above 55 degrees Celsius.
Verdict: ELEGOO ABS-Like 3.0+ Resin 2000g provides high impact resistance and drillable durability for LCD resin printers. It offers fast curing and low shrinkage while maintaining stability up to 55 degrees Celsius.
SUNLU ABS-Like 3D Printer Resin 2000g
Best for: SLA users needing ABS-grade toughness
- Compatible Material
- ABS (what this guide is about)
- Printing Technology
- SLA
- Features
- High Speed
- Resin Type
- ABS-Like
- Curing Wavelength
- 405nm
- Dimensions
- 3.94 × 3.94 × 3.94 inches
SUNLU ABS-Like 3D Printer Resin 2000g is a liquid photopolymer formulated for SLA, DLP, and LCD 3D printers. Unlike standard ABS spool filament, this material cures under 405nm UV light to deliver impact-resistant prints with low shrinkage. It is engineered for rapid curing across 2K to 8K resolution machines. You will find this 2000g bottle suitable if you need durable, non-brittle parts produced on a resin printer.
Pros
- Formulated for 405nm UV curing SLA, LCD, and DLP printers
- Large 2000g bottle volume
- Engineered for low shrinkage and abrasion resistance
- Compatible with screen resolutions from 2K up to 8K
Cons
- Liquid resin format incompatible with standard FDM filament extruders
- Requires UV light curing setup at 405nm wavelength
Good fit if
- You operate a 405nm SLA, LCD, or DLP resin 3D printer.
- You need high-detail miniatures or parts with ABS-like impact resistance.
- You want a large 2000g bottle for extended printing volume.
Skip if
- You use an FDM 3D printer designed for 1.75mm spooled filament.
- You require a curing wavelength other than 405nm.
Verdict: SUNLU ABS-Like 3D Printer Resin 2000g provides SLA and LCD printer operators with high-strength, low-shrinkage parts cured via 405nm UV light. It is a solid choice when you need ABS-grade toughness from a liquid photopolymer instead of standard filament.
Stronghero3D 1.75mm Multicolor Rainbow ABS Filament
Best for: multicolor functional prints on enclosed 3D printers
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Color Printing
- Multi-Color
- Color Effect
- Rainbow
View on Amazon: Stronghero3D 1.75mm Multicolor Rainbow ABS Filament
This Stronghero3D spool provides 1.75mm ABS filament with a continuous rainbow color gradient including yellow, green, blue, purple, red, and orange tones. The 2.2-pound spool is engineered for impact resistance, structural durability, and heat resistance typical of ABS plastics. It suits you if you operate an enclosed 3D printer and want multi-tone decorative prints, figures, or cosplay props without manual painting or multi-material extruder setups.
Pros
- Integrated rainbow transition across yellow, green, blue, purple, red, and orange hues
- ABS material provides heat resistance and impact toughness for functional parts
- Standard 1.75mm diameter designed for steady feeding and extrusion
- Full 2.2-pound (1 kg) spool capacity
Cons
- Requires an enclosed 3D printer for optimal performance as recommended by manufacturer
- Recommended specifically for experienced users rather than beginners
- Specific nozzle and bed temperature ranges are omitted from published specifications
Good fit if
- You run an enclosed 3D printer capable of handling ABS filament requirements.
- You want seamless multicolor transitions without needing a multi-material extruder system or painting.
- You require the durability and heat tolerance of ABS for props, toys, or decorative models.
Skip if
- You print on an open-frame machine without an enclosure.
- You need uniform single-color parts rather than a rainbow gradient.
- You are a novice seeking standard low-temperature PLA materials.
Verdict: Stronghero3D 1.75mm Multicolor Rainbow ABS Filament gives you functional heat and impact resistance paired with a shifting multi-hue aesthetic. It is a solid pick if your enclosed setup handles ABS and you want gradient parts without paint.
Creality CR-ABS 1.75mm 1kg Filament
Best for: Creality FDM users needing tough ABS parts
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1 kg
- Size
- 1KG
- Dimensions
- 8.27 × 2.76 × 8.27 inches
This is a 1.75mm engineering ABS filament on a 1kg (2.2-pound) spool, formulated for Creality FDM 3D printers. It features enhanced impact and heat resistance along with wear resistance and dimensional stability. The spool measures 8.27 by 8.27 by 2.76 inches. If you need rigid, heat-resistant thermoplastic parts with reduced corner warping and layer separation on your Creality FDM setup, this blue spool fits your workflow.
Pros
- 1.75mm diameter with high heat and impact resistance
- Formulated to reduce layer separation and corner warping
- High wear resistance, corrosion resistance, and dimensional stability
- Backed by 12-month and 24-hour after-sales support
Cons
- Requires dry, ventilated storage away from heat and moisture
- Explicitly targeted for compatibility with Creality FDM printers
Good fit if
- You print functional parts on a Creality FDM 3D printer.
- You need rigid components requiring high impact and wear resistance.
Skip if
- You cannot maintain a dry, ventilated storage space for the spool.
- You use non-Creality hardware and want manufacturer-guaranteed compatibility.
Verdict: Creality CR-ABS 1.75mm 1kg Filament delivers rigid, heat-resistant output with reduced warping for Creality FDM platforms. It provides reliable wear resistance when stored in dry, controlled conditions.
Creality Hyper ABS 1.75mm Filament
Best for: high-speed printing on open-frame machines
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 350 mm/s
- Color
- Black
Creality Hyper ABS is a 1.75mm filament formulated for high-speed 3D printing. It supports print speeds up to 350 mm/s while maintaining impact resistance rated at 19 kJ/m². The material features high fluidity and rapid cooling to aid layer deposition without requiring an enclosed chamber. You will find this 1kg black spool suitable if you operate fast-moving core-XY or Cartesian setups.
Pros
- Rated for print speeds up to 350 mm/s
- Impact resistance of 19 kJ/m²
- High fluidity and fast cooling formulation
- Formulated for open printing environments with fewer volatiles
Cons
- No nozzle or bed temperature ranges listed in data
- Limited to a single 1kg spool package
Good fit if
- You run a high-speed printer pushing up to 350 mm/s.
- You need functional parts with 19 kJ/m² impact resistance.
- You print on an open machine requiring reduced volatile emissions.
Skip if
- You need detailed extrusion temperature specifications provided upfront.
- You prefer buying filament in multi-kilogram bulk bundles.
Verdict: Creality Hyper ABS 1.75mm Filament delivers 19 kJ/m² impact resistance and flows fast enough for 350 mm/s operation. It suits fast-moving printers needing functional ABS parts without mandatory enclosure requirements.
Comgrow Dual-Spool Filament Dryer Box
Best for: drying two filament spools simultaneously
- Compatible Material
- PLA, PETG, ABS (what this guide is about)
- Dimensions
- 9.2 × 6.4 × 9 inches
- Weight
- 3.31 pounds
This heated dry box holds two 1 kg spools to remove moisture from ABS and other filaments before or during printing. It features an adjustable temperature range of 40°C to 50°C, run times from 6 to 12 hours, and a 2-inch LCD display. If you run hygroscopic filaments in 1.75 mm or 2.85 mm sizes and need dual-spool feeding with sealed storage, this unit fits your workspace.
Pros
- Holds up to two 1 kg spools simultaneously
- Supports both 1.75 mm and 2.85 mm filament diameters
- Adjustable timer settings from 6 hours to 12 hours
- Built-in 2-inch LCD screen for temperature and humidity tracking
Cons
- Maximum heating temperature is capped at 50°C
- Timer settings do not allow run times under 6 hours
- Automatically shuts down after 3 minutes if work state is unconfirmed
Good fit if
- You need to store and dry two 1 kg spools at the same time.
- You use both 1.75 mm and 2.85 mm filament formats.
- You want direct feeding during printing through dedicated outlets.
Skip if
- You require drying temperatures exceeding 50°C for your materials.
- You need short drying cycles under 6 hours.
Verdict: Comgrow Dual-Spool Filament Dryer Box provides dedicated two-spool capacity and active monitoring for routine ABS filament preparation. Its 50°C thermal ceiling limits it to steady, moderate heating rather than high-temperature dehydration.
Siraya Tech Fast ABS-Like Resin 1kg
Best for: high-resolution resin prints needing ABS durability
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS-Like resin
- Net Weight
- 1kg
- Dimensions
- 5.12 × 5.94 × 8.46 inches
- Weight
- 2.2 pounds
Siraya Tech Fast ABS-Like Resin 1kg is a photopolymer liquid designed for LCD and DLP 3D printers rather than standard FDM spool systems. It provides 8K capability, low odor, and non-brittle mechanical properties in a 1kg bottle. If you need ABS-like impact resistance and smooth surface finish for tabletop or industrial models without spool extrusion, this liquid material gives you fast curing times.
Pros
- Compatible with LCD and DLP 3D printers up to 8K resolution
- Formulated for fast printing, fast curing, and low odor
- Non-brittle formulation engineered to withstand accidental falls
- Rinses clean using alcohol spray and an air gun
Cons
- Requires a resin printer instead of standard FDM filament hardware
- Experiences volume shrinkage during the curing process
- Requires alcohol washing and post-print cleaning steps
Good fit if
- You use an LCD or DLP resin 3D printer capable of up to 8K resolution.
- You want ABS-like durability and toughness on detailed tabletop or industrial models.
- You prefer a low-odor resin that rinses clean with alcohol spray.
Skip if
- You print with standard 1.75mm FDM filament 3D printers.
- You need a material that experiences zero volume shrinkage during UV curing.
Verdict: Siraya Tech Fast ABS-Like Resin 1kg delivers high-resolution, impact-resistant parts for LCD and DLP systems looking for ABS durability in liquid resin format.
eSUN ABS+ 1.75mm Filament
Best for: printing tough parts with reduced warping
- Compatible Material
- ABS (what this guide is about)
- Material Type
- ABS+
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.05mm
- Weight
- 2.2 pounds
This is eSUN ABS+ filament in a 1.75mm diameter and a 1kg spool. It uses a modified formulation designed to reduce warping and cracking compared to standard ABS, while retaining heat and impact resistance. The spool provides 410 to 425 meters of material with a +/- 0.05mm dimensional accuracy. It suits you if you produce functional components requiring toughness and dimensional stability.
Pros
- +/- 0.05mm dimensional accuracy
- Modified formulation for reduced warping and cracking
- Vacuum-sealed packaging with desiccant included
- 410 to 425 meters of filament per 1kg spool
Cons
- Diameter tolerance is +/- 0.05mm rather than +/- 0.02mm
- No specific printing temperature ranges listed in specifications
Good fit if
- You need a 1.75mm ABS filament engineered to minimize warping on large prints.
- You require 410 to 425 meters of material per 1kg spool for mechanical components.
Skip if
- You require filament with a published tolerance tighter than +/- 0.05mm.
- You use resin 3D printers instead of 1.75mm FDM machines.
Verdict: eSUN ABS+ 1.75mm Filament delivers modified ABS toughness with lower warping risk and standard +/- 0.05mm precision. It gives you dependable impact resistance for functional 3D printing tasks.
Comgrow Dual Spool Filament Dryer
Best for: drying two spools of filament simultaneously
- Compatible Material
- PLA, PETG, ABS, TPU (what this guide is about)
- Size
- 2KG
- Dimensions
- 6.89 × 11.2 × 9.8 inches
- Weight
- 4.4 pounds
This heated drying box holds two 1-kilogram spools simultaneously and conditions materials before or during printing. It features a 150W PTC heater reaching up to 70°C with 360-degree fan circulation, plus dedicated presets for nine materials including TPU and ABS. Sealed gaskets line the enclosure and output holes to block moisture. It suits you if you need to dry and feed hygroscopic spools directly to two separate 3D printers.
Pros
- Holds two 1 kg spools at the same time
- 150W PTC heater with 40°C to 70°C range
- Reaches 50°C in 7 minutes and 70°C in 25 minutes
- One-key presets for 9 filament types including TPU and ABS
- Dual filament outlet ports with sealing rings
Cons
- Maximum drying temperature is limited to 70°C
- Footprint measures 11.2 by 6.9 inches on your workbench
Good fit if
- You need to dry two 1 kg spools simultaneously.
- You want preconfigured temperature and time profiles for TPU and ABS.
- You feed filament directly to printers through sealed PTFE tube ports.
Skip if
- You require drying temperatures exceeding 70°C for specialized filaments.
- You only need a compact enclosure for a single spool.
Verdict: Comgrow Dual Spool Filament Dryer provides active 150W PTC heating up to 70°C for two 1 kg spools at once. Built-in presets and dual exit ports make it a practical setup for drying hygroscopic filaments like TPU and ABS.
Specifications side by side
| Spec | ANYCUBIC 1.75mm Grey ABS Filament 1kg | ELEGOO 1.75mm ABS Filament (1 kg) | Polymaker 1.75mm ABS Filament | SUNLU PC-ABS 1.75mm Filament | SUNLU 1.75mm ABS Filament 1kg | SUNLU PC-ABS Hybrid 1.75mm Filament | ELEGOO ABS-Like 3.0+ Resin 2000g | SUNLU ABS-Like 3D Printer Resin 2000g | Stronghero3D 1.75mm Multicolor Rainbow ABS Filament | Creality CR-ABS 1.75mm 1kg Filament | Creality Hyper ABS 1.75mm Filament | Comgrow Dual-Spool Filament Dryer Box | Siraya Tech Fast ABS-Like Resin 1kg | eSUN ABS+ 1.75mm Filament | Comgrow Dual Spool Filament Dryer |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material Type | ABS | ABS | ABS | PC-ABS | ABS | PC-ABS | not specified | not specified | ABS | ABS | ABS | not specified | ABS-Like resin | ABS+ | not specified |
| Filament Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | not specified | not specified | 1.75mm | 1.75mm | 1.75mm | not specified | not specified | 1.75mm | not specified |
| Net Weight | 1KG | 1KG | 1kg | 1KG | 1kg | 1kg | not specified | not specified | 1kg | 1 kg | 1KG | not specified | 1kg | 1KG | not specified |
| Max Print Speed | not specified | not specified | not specified | 230mm/s | 100mm/s | 230mm/s | not specified | not specified | not specified | not specified | 350 mm/s | not specified | not specified | not specified | not specified |
| Dimensional Accuracy | not specified | not specified | not specified | not specified | +/- 0.02mm | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | +/- 0.05mm | not specified |
| Printing Technology | not specified | not specified | not specified | not specified | not specified | not specified | Resin | SLA | not specified | not specified | not specified | not specified | Resin | not specified | not specified |
| Color Printing | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Multi-Color | not specified | not specified | not specified | not specified | not specified | not specified |
| Compatible Material | ABS | ABS | ABS | ABS | ABS | ABS | ABS | ABS | ABS | ABS | ABS | PLA, PETG, ABS | ABS | ABS | PLA, PETG, ABS, TPU |
| Features | not specified | not specified | not specified | not specified | not specified | not specified | not specified | High Speed | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Color | 1kg Abs Grey | Abs Black 1kg | 114 - 1.75mm Grey (Hex Code: #8c8d93) | 1kg Pc-abs White (Hex Code: #F9f8f4) | 1kg Abs Skin Beige | 1kg Pc-abs Black | Black | 2000g-dark Grey | Abs-rainbow | 1kg Blue | Black | Transparent | Grey 1kg | H-light Blue | Graphite Black |
| Size | 0.06 Inch | ABS 1.75mm 1KG | ABS 1kg | PC | 1KG | PC-ABS | Large | L-2000g | 1.75Mm | 1KG | Abs | 2 kg | 1KG | ABS+ 1.75MM - 1KG | 2KG |
| Color Effect | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Rainbow | not specified | not specified | not specified | not specified | not specified | not specified |
| Application | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Functional Parts | not specified | not specified | not specified | not specified | not specified | not specified |
| Resin Type | not specified | not specified | not specified | not specified | not specified | not specified | ABS-Like | ABS-Like | not specified | not specified | not specified | not specified | ABS-Like | not specified | not specified |
| Curing Wavelength | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 405nm | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Weight | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | not specified | 4.41 pounds | 2.2 pounds | 2.2 pounds | 2.64 pounds | 3.31 pounds | 2.2 pounds | 2.2 pounds | 4.4 pounds |
| Dimensions | not specified | not specified | 6.69 × 10.6 × 3.94 inches | not specified | not specified | not specified | not specified | 3.94 × 3.94 × 3.94 inches | not specified | 8.27 × 2.76 × 8.27 inches | 8.26 × 8.26 × 3.54 inches | 9.2 × 6.4 × 9 inches | 5.12 × 5.94 × 8.46 inches | not specified | 6.89 × 11.2 × 9.8 inches |
| Model | not specified | US-EL-3D-PA01 | PE01003 | Filament Technique pour Impression 3D | ABS Filament 1.75mm | PC-ABS Engineering Filament | liquid-3d-printing-materials | SUNLU ABS Like Resin | ABS-MULTY | PETG | Hyper ABS | AK36WG-1200400J | not specified | ABS+175D1KG | SH02 |
How to Choose the Best ABS Filament
-
Verify Print Speed Limits
Check the rated print speed of the filament if you operate a modern high-speed machine. Standard ABS requires slower extrusion to prevent defects and layer separation. High-speed options handle accelerated feed rates without jamming or under-extrusion. For example, Creality Hyper ABS 1.75mm Filament is rated for operation up to 350 mm/s while maintaining 19 kJ/m² impact resistance. If your hardware runs at high velocities, confirm the material specification lists high-speed printing before choosing standard spools.
-
Check Heated Bed Requirements
Review your 3D printer heated bed specs before buying ABS spools. ABS requires sustained surface heat to keep base layers adhered and prevent edge lifting during cooling. For example, SUNLU 1.75mm ABS Filament 1kg specifies a bed temperature range between 80°C and 120°C, alongside nozzle temperatures between 240°C and 270°C. If your machine cannot reach at least 100°C on the build plate, the material may detach mid-print. Check your printer firmware and hardware limits first.
-
Evaluate Active Dryer Temperatures
ABS absorbs ambient moisture, which causes steam bubbles, rough surface texture, and weak layer adhesion. Check the operating temperature specs on filament drying hardware to confirm it reaches proper dehydration thresholds. For instance, the Comgrow Dual Spool Filament Dryer provides 150W PTC heating reaching up to 70°C for two 1 kg spools. Lower-powered dryer boxes that max out at 50°C take substantially longer to condition hygroscopic filaments before you print. Choose drying gear matched to the thermal needs of ABS.
-
Check Enclosure Hardware Requirements
Check whether your printer features an enclosed build chamber before selecting traditional ABS. Standard ABS shrinks as it cools, leading to warped corners and split layers if exposed to ambient room drafts. ELEGOO 1.75mm ABS Filament specifically requires an enclosed print chamber to maintain ambient heat during fabrication. If you own an open-frame printer, you will need modified formulations designed for open builds or an external cover to prevent air movement across the print bed.
-
Inspect Dimensional Tolerance Ratings
Check the stated dimensional tolerance on the spool before purchasing filament for precision assemblies. Consistent diameter ensures accurate extrusion volume and prevents inconsistent flow or mechanical binding in the feed path. For example, eSUN ABS+ 1.75mm Filament lists a standard +/- 0.05mm precision rating along with a modified formulation for reduced warping. If you produce functional interlocking mechanical parts, tight diameter consistency helps prevent dimensional drift and nozzle clogging during long printing sessions.
-
Assess Integrated Color Effects
Consider pre-blended multicolor filaments if your mechanical parts require visual distinction without post-print finishing. Most ABS materials arrive in solid industrial colors such as black, grey, or white. If you need color variation directly off the build plate, Stronghero3D 1.75mm Multicolor Rainbow ABS Filament provides an integrated rainbow color effect. Selecting a filament with built-in gradient color printing saves you the effort of painting or plating functional parts after printing completes.
Frequently asked questions
Does ABS filament require an enclosed 3D printer?
Most standard ABS filaments perform best inside an enclosed 3D printer to maintain ambient heat and prevent warping. Options like ELEGOO ABS specify an enclosed chamber for proper results due to thermal contraction. However, specialized formulations like Creality Hyper ABS are engineered to operate on open-frame machines without mandatory enclosure requirements while handling print speeds up to 350 mm/s.
What bed temperature is required for printing ABS filament?
ABS filament typically requires a heated bed temperature between 80°C and 120°C to secure adequate first-layer adhesion. For example, SUNLU ABS specifies a bed range between 80°C and 120°C alongside a 240°C to 270°C nozzle requirement. Similarly, ANYCUBIC Grey ABS demands equipment supporting a 100°C bed temperature to help your functional prints achieve their stated 85°C heat resistance.
Can you use ABS filament in resin 3D printers?
Standard ABS filament is designed strictly for FDM extruders, but you can use ABS-like photopolymer resin in resin 3D printers. Products such as SUNLU ABS-Like Resin and ELEGOO ABS-Like 3.0+ are liquid photopolymers engineered for 405nm UV LCD and SLA hardware. They deliver impact resistance and durability comparable to ABS plastic without utilizing heated extrusion nozzles or spool-fed filament paths.
Why should you dry ABS filament before printing?
You should dry ABS filament before printing because the material absorbs ambient moisture, which causes bubbling, stringing, and weak layer bonding. Pre-drying prepares the plastic for clean extrusion. Dedicated equipment like the Comgrow Dual Spool Filament Dryer uses active 150W PTC heating up to 70°C to remove trapped water, while standard dryer boxes provide steady monitoring up to a 50°C thermal ceiling.
What is the difference between standard ABS and PC-ABS filament?
PC-ABS blends polycarbonate with ABS to deliver higher thermal deflection and greater impact toughness than standard ABS filament. Standard options like ANYCUBIC ABS provide heat resistance up to 85°C. In contrast, SUNLU PC-ABS increases thermal resistance up to 102°C for demanding functional models, though the blend demands capable hotends, elevated bed temperatures, and bed adhesives to prevent detachment during printing.
What dimensional tolerance should you expect from 1.75mm ABS filament?
You should expect a dimensional tolerance within plus or minus 0.05 millimeters from standard 1.75mm ABS filament spools. A uniform diameter ensures predictable volumetric flow through your hotend without sudden over-extrusion or clogging. Products such as eSUN ABS+ maintain standard +/- 0.05mm precision, helping you produce reliable mechanical components that match their intended computer-aided design measurements accurately.
Can you print multicolor parts with ABS filament?
Yes, you can print multicolor parts by using specialized gradient spools or multi-material automated feed systems. Filaments like Stronghero3D Multicolor Rainbow ABS feature shifting multi-hue transitions directly along the strand, providing aesthetic gradients without painting. Alternatively, standard single-color spools like ANYCUBIC Grey ABS support automated loading and management when paired with multi-material systems like the ACE Pro.