ZIRO PLA Filament 1.75mm Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This ziro pla filament 1 75mm review covers the ZIRO Metal PLA in Copper. It is a 1.75mm diameter spool weighing 1kg (2.2lbs). The material offers a metallic finish for your prints. Dimensional accuracy stays within +/-0.03mm. This consistency helps your printer maintain steady extrusion. You can print at speeds up to 90mm/s. The nozzle temperature range sits between 190-220℃. The bed should be heated to 50-60℃. The filament comes vacuum sealed with desiccant. It also includes an extra reseal bag and a notecard for support.
What stands out
- 1.75mm diameter with +/-0.03mm tolerance
- 1kg (2.2lbs) net weight per spool
- Metallic copper finish appearance
- Recommended print speed up to 90mm/s
- Vacuum sealed with desiccant and bonus bag
Who it fits
Good fit for
This filament suits makers who want the look of metal without the weight. The tight diameter tolerance helps users who need consistent layer adhesion. You will appreciate the included reseal bag if you store filament in humid environments. The moderate print speed allows for reliable output on standard FDM printers. It is a practical choice for decorative items that benefit from a shiny, metallic surface.
Who should skip it
You should look elsewhere if you need high-strength functional parts. This PLA variant prioritizes aesthetics over durability. The recommended temperatures are standard, so you do not need specialized hardware. However, the metallic appearance is a surface effect, not solid metal. If you require high-temperature resistance or extreme mechanical strength, this material may not meet your needs.
Verdict: This filament delivers a consistent metallic look with reliable dimensional accuracy. It is a solid choice for decorative prints where appearance matters most.
Key specs explained
Filament Diameter: 1.75mm
This is the standard width for most desktop 3D printers. You can load this filament into almost any consumer-grade machine without needing special adapters. It ensures smooth feeding into the extruder gear. If your printer uses 1.75mm spools, this size is a direct fit. You do not need to check for compatibility with larger 2.85mm or 3mm filaments. This universal size makes it easy to find replacements later.
Dimensional Accuracy: +/-0.03mm
This tolerance level measures how close the actual filament width is to the target 1.75mm. A variance of only 0.03mm means the strand is very consistent. Consistent diameter prevents clogs and ensures steady extrusion. Your printer feeds the material evenly, which reduces layer shifts and gaps. This accuracy is crucial for detailed prints. When shopping, look for similar tight tolerances to avoid printing issues caused by uneven thickness.
Material Type: PLA
Polylactic acid is a biodegradable plastic made from renewable resources like corn starch. It is easy to print with and has low warping. You get clean prints with minimal odor during the process. PLA is ideal for prototypes, decorative items, and hobbyist projects. It does not require a heated bed for basic adhesion, though the listing recommends 50-60℃. This material is forgiving for beginners and reliable for experienced users seeking quick results.
Net Weight: 1kg (2.2lbs)
This weight indicates the total amount of filament on the spool. One kilogram allows you to print multiple medium-sized objects before needing a refill. It balances portability with value. A full spool reduces the frequency of filament changes. You can calculate print time based on this volume. This standard size fits most storage containers and spool holders. It is a practical amount for regular users who print weekly or monthly without excessive waste.
Max Print Speed: 90mm/s
This specification tells you the recommended maximum speed for reliable printing. You can push your printer to 90mm/s without sacrificing quality. Faster speeds reduce print time for large models. However, staying within this limit helps maintain dimensional accuracy. If you print too fast, you might see artifacts or weak layers. This speed is suitable for most modern FDM printers. It allows you to balance speed and detail effectively for everyday projects.
Design and Build Quality
According to the listing, the ZIRO Metal PLA arrives in a vacuum-sealed package with a desiccant packet to control moisture. This packaging choice suggests the material is sensitive to humidity, which is common for PLA blends. The spool itself measures 8.2 inches in width and height, with a height of 3.2 inches. These dimensions fit standard 3D printer filament storage bins and most printer enclosures. The net weight is 1kg (2.2lbs), providing a substantial amount of material for your projects without being overly heavy to handle.
The filament diameter is 1.75mm, adhering to the industry standard for desktop 3D printers. This ensures compatibility with a wide range of consumer-grade machines. Dimensional accuracy is listed at +/-0.03mm. This tight tolerance helps maintain consistent extrusion flow, reducing the risk of clogs or under-extrusion during long prints. The copper-colored finish is achieved through metal-infused PLA. This gives your prints a metallic appearance without requiring post-processing like painting or polishing.
The material is designed for ease of use. It is described as tangle-free and bubble-free, which simplifies loading onto the spool and reduces the chance of print failures. The recommended print speed ranges from 30 to 90mm/s. This flexibility allows you to adjust settings based on your printer’s capabilities and the complexity of your model. The copper aesthetic is part of a broader Metal Series, offering a distinct visual style for functional or decorative parts.
Setup and Everyday Use Guide
Loading the ZIRO Metal PLA begins with verifying your printer settings. The listing recommends an extrusion or nozzle temperature between 190 and 220 degrees Celsius. You should set your heat bed to 50 to 60 degrees Celsius. These ranges are standard for PLA materials. The filament diameter is 1.75mm, which fits most desktop 3D printers. You can load it directly into the extruder without special adapters. The dimensional accuracy stays within +/-0.03mm. This tight tolerance helps your printer maintain steady extrusion. You do not need to adjust your flow rate significantly. The product lists a maximum print speed of 90mm/s. You can run your prints at speeds between 30 and 90mm/s. This flexibility allows you to balance quality and time. The packaging includes a vacuum seal and a desiccant packet. This keeps the filament dry until you open it. The listing also mentions a bonus resealable bag. You can use this for storing leftover filament. This feature helps manage moisture exposure during daily use. The material is described as tangle-free and clog-free. This suggests smooth feeding into your printer’s drive gears. The metal-infused PLA provides a metallic appearance. You get consistent results layer by layer. If you have questions, the listing notes an after-sales service card. You can contact support for satisfactory solutions. The setup process remains straightforward. You simply adjust temperatures and start printing. The consistent diameter ensures reliable performance.
Before You Buy This Filament
You need to verify your printer’s compatibility before loading this ZIRO Metal PLA. Confirm your extruder gear handles 1.75mm filament smoothly. Check that your build plate is level for the recommended 50 to 60 degrees Celsius bed temperature. Since the material is metal-infused, ensure your nozzle is wear-resistant. Brass nozzles may wear faster with abrasive blends, so consider hardened steel for longevity. You should also keep the included reseal bag handy. Moisture control is critical for maintaining print quality. Store unused filament in a dry environment to prevent degradation. This spool fits well alongside other metal series options in our 1 product guide. It offers a distinct aesthetic without requiring post-processing. However, you must manage humidity carefully. The vacuum seal and desiccant help, but long-term storage needs attention. If you prioritize metallic looks and steady extrusion within the 190 to 220 degrees Celsius range, this choice aligns with your workflow. Just ensure your machine supports the specified print speeds up to 90mm/s for optimal results.
Check before you buy
- Verify your printer accepts 1.75mm filament diameter.
- Check nozzle material for metal-infused wear resistance.
- Ensure your bed heats to 50-60 degrees Celsius.
- Confirm your extruder handles the specified print speeds.
The product at a glance
ZIRO Metal PLA 1.75mm Copper
Best for: decorative parts with metallic aesthetics
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 90mm/s
- Dimensional Accuracy
- +/-0.03mm
- Printing Technology
- FDM
View on Amazon: ZIRO Metal PLA 1.75mm Copper Affiliate link
This ZIRO filament is a 1.75mm PLA blend with metal infill for a copper finish. It maintains a tight diameter tolerance of +/-0.03mm for consistent layer adhesion. You can print at speeds up to 90mm/s. The spool weighs 1kg and comes vacuum sealed with desiccant. It suits users seeking metallic aesthetics without complex post-processing.
Pros
- Tight dimensional accuracy of +/-0.03mm
- Max print speed of 90mm/s
- Metal-infused PLA for copper appearance
- Vacuum sealed with desiccant
Cons
- Limited to copper color in this specific listing
- Requires specific temperature range of 190-220℃
- No mention of included spool holder
Good fit if
- You want a metallic look directly from the printer
- You need reliable diameter consistency for detailed prints
- You prefer vacuum-sealed packaging for freshness
Skip if
- You require multi-color or rainbow effects
- You need a spool larger than 1kg
- You prefer standard white or black PLA
Verdict: ZIRO Metal PLA 1.75mm Copper delivers consistent prints with a distinct metallic finish. It fits users who want decorative parts with minimal post-processing effort.
Specifications side by side
| Spec | ZIRO Metal PLA 1.75mm Copper |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 90mm/s |
| Dimensional Accuracy | +/-0.03mm |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Dimensions | 8.2 × 8.2 × 3.2 inches |
| Weight | 2.2 pounds |
| Color | Metal-copper |
| Model | 1.75mm |
Frequently asked questions
Is ZIRO Metal PLA 1.75mm suitable for beginners?
Yes, it is suitable for beginners. The material offers consistent prints with minimal post-processing effort. Its standard 1.75mm diameter fits most consumer-grade printers without special adapters. You can load it into almost any machine easily. The metallic finish requires little extra work to achieve a decorative look. This makes it a practical choice for new users.
What temperature settings are recommended for this filament?
You should set the extrusion or nozzle temperature between 190 and 220 degrees Celsius. For the build plate, use a heat bed temperature of 50 to 60 degrees Celsius. These ranges are standard for PLA blends. Following these settings helps ensure steady extrusion. It also supports the dimensional accuracy of your prints within the specified tolerances.
How does the packaging protect the filament?
The filament arrives in a vacuum-sealed package. It includes a desiccant packet to control moisture levels inside. This packaging choice suggests the material is sensitive to humidity. Keeping it dry helps maintain print quality. You should store the spool in a cool, dry place after opening to preserve its integrity and performance during use.
What are the physical dimensions of the spool?
The spool measures 8.2 inches in width and height. Its height is also listed as 8.2 inches, with a depth of 3.2 inches. The total weight is 2.2 pounds. These dimensions allow it to fit standard 3D printer filament holders. The size is compatible with most desktop 3D printer setups without requiring additional mounting hardware.
What finish does the ZIRO Metal PLA provide?
It provides a distinct metallic finish. The copper color gives your prints a decorative aesthetic. This look is achieved directly from the printer. You do not need to paint or polish the parts afterward. The metal-infused material creates a unique surface texture. This saves time on post-processing while delivering a professional appearance.
Is the filament compatible with all 3D printers?
It is compatible with most desktop 3D printers. The 1.75mm diameter is the standard width for consumer-grade machines. You can load it into almost any printer that accepts this size. Verify your extruder gear handles 1.75mm filament smoothly. This ensures steady feeding into the extruder gear for consistent results.
How accurate are the prints with this filament?
Dimensional accuracy stays within +/-0.03mm. This consistency helps your printer maintain steady extrusion. Precise dimensions are crucial for functional parts. The material delivers reliable results for decorative items as well. You can trust the specifications for tight tolerances. This accuracy reduces the need for manual adjustments during printing.