UniTak3D vs BIQU 3d Printer Accessories: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing UniTak3D vs BIQU 3d printer accessory options for Bambu Lab printers. Both brands offer 257x257mm double-sided build plates with textured PEI surfaces for strong adhesion. They share the same dimensions and compatible printer models. The main difference lies in the secondary coating and material composition. UniTak3D uses a smooth PEI side, while BIQU features a smooth PEO side on a spring steel base. This affects surface finish and removal methods.
Key differences
| Aspect | UniTak3D 257x257mm Double-Sided PEI Build Plate | BIQU 257x257mm PEO and PEI Build Plate |
|---|---|---|
| Smooth Side Coating | PEI | PEO |
| Base Material | PEI | Spring steel |
| Textured Side Temp Resistance | 300℃ | not listed |
| Smooth Side Temp Resistance | 200℃ | not listed |
| Variations Count | 14 | 27 |
Which one should you choose?
Choose UniTak3D 257x257mm Double-Sided PEI Build Plate if
- You prefer a smooth side coated with PEI for consistent material interaction.
- You want explicit temperature resistance ratings for both sides of the plate.
- You need a plate that works without glue for PLA on the textured side.
Choose BIQU 257x257mm PEO and PEI Build Plate if
- You want to print diamond patterns using the smooth PEO surface.
- You prefer a spring steel base for flexible print removal.
- You want more color and size variation options available.
Verdict: Choose UniTak3D if you want explicit temperature specs and a uniform PEI construction. Select BIQU if you prefer the flexibility of a spring steel base and the unique diamond pattern capability of PEO. Both fit your 257x257mm Bambu Lab printer equally well.
Build Plate Surface and Materials
Surface Coatings
UniTak3D offers a double-sided plate with textured PEI on one side and smooth PEI on the other. The textured side provides superior adhesion without glue, while the smooth side requires glue sticks for most filaments except PLA. BIQU provides a double-sided design featuring textured PEI and smooth PEO. The smooth PEO side allows for diamond pattern printing, while the textured PEI side offers textured pattern results. Both brands utilize PEI for primary adhesion, but the secondary coating differs significantly between the two products.
Base Material
The UniTak3D build plate relies on a spring steel sheet coated with PEI powder. The product description highlights the flexibility of the spring steel for easy model removal. BIQU explicitly identifies its base material as spring steel, noting an upgraded magnetic build surface. The BIQU plate emphasizes high temperature stability, flame retardancy, and high strength. Both plates use spring steel for flexibility, but BIQU highlights specific magnetic and flame-retardant properties in its feature list that UniTak3D does not mention.
Temperature Resistance
UniTak3D specifies distinct temperature limits for its two sides. The textured PEI side resists up to 300℃, while the smooth PEI side resists up to 200℃. This allows for high-temperature materials like PC and Nylon on the textured side. BIQU lists high-temperature stability and resistance as general properties of the Panda build plate surface. It does not provide specific temperature thresholds for either the PEO or PEI sides. UniTak3D provides precise numerical data for heat limits, whereas BIQU offers only qualitative descriptions.
Print Surface Finish
UniTak3D ensures a smooth bottom surface on prints made with the smooth PEI side. The textured side provides strong adhesion for various materials including PLA, ABS, ASA, PETG, TPU, Nylon, PA, and PC. BIQU’s smooth PEO side is designed to print diamond patterns, while the textured PEI side creates textured patterns. Both plates ensure excellent flatness for the bottom of the print. UniTak3D focuses on material compatibility across a wide range, while BIQU focuses on specific aesthetic patterns achievable with its unique PEO coating.
Variety and Options
UniTak3D offers 14 variations, including options for Flashforge, ANYCUBIC, Elegoo, and Snapmaker printers. Color options include Double Sided Textured, Glossy&Matte, and PEI+PEO. BIQU provides 27 variations, covering more diverse brands like Voron, MK4, Core One, and Ender3. BIQU also offers unique finishes like Frostbite and Glacier. While both support major Bambu Lab models, BIQU presents a significantly larger number of variations and broader compatibility with non-Bambu printers.
Which Build Plate Fits Your Workflow
Users wanting strong adhesion without glue
UniTak3D’s textured PEI side offers superior adhesion that keeps models firmly attached without needing glue. This surface is heat resistant up to 300℃, allowing you to print with a wide range of materials like ABS, ASA, PETG, and Nylon. You get reliable grip for difficult filaments while maintaining a smooth bottom finish on the other side.
Printers seeking decorative diamond patterns
BIQU features a smooth PEO side specifically designed to print diamond patterns. This unique surface option adds aesthetic variety to your prints. The textured PEI side provides strong adhesion for standard prints. You get a magnetic build surface that is easy to stick and remove, eliminating printing anxiety while offering distinct texturing capabilities.
Users prioritizing flatness and stability
BIQU emphasizes excellent flatness with its Designer Series construction, ensuring high flatness for the bottom of your prints. The spring steel base provides high temperature stability and strength, making it less likely to deform. This flexible yet sturdy plate ensures models attach firmly to the platform, supporting consistent print quality across various filament types.
The products compared
UniTak3D 257x257mm Double-Sided PEI Build Plate
Best for: Bambu Lab users wanting dual surface options
- Primary Material
- Spring Steel
- Dimensions
- 257x257mm
- Maximum Temperature
- 300℃
- Build Surface Type
- Smooth & Textured PEI
- Build Plate Material
- PEI, Spring Steel
View on Amazon: UniTak3D 257x257mm Double-Sided PEI Build Plate Affiliate link
This UniTak3D build plate offers a double-sided design with smooth and textured PEI surfaces. It fits 257x257mm beds for Bambu Lab printers like the A1 and P1S. The textured side resists heat up to 300°C for strong adhesion without glue. The smooth side allows easy removal but may need glue stick for non-PLA filaments. You get a versatile surface for various materials.
Pros
- Double-sided smooth and textured PEI coating
- Compatible with 257x257mm Bambu Lab beds
- Textured side heat resistant to 300°C
- Smooth side enables easy model removal
Cons
- Smooth side requires glue stick for most filaments
- Must re-level bed when flipping sides
- No strong chemical cleaners allowed
Good fit if
- You print with PLA, ABS, or Nylon
- You want flexible adhesion options
- You own a 257x257mm Bambu Lab printer
Skip if
- You use a different bed size
- You prefer automatic bed leveling only
- You need high-temperature resistance above 300°C
Verdict: UniTak3D Double-Sided PEI Build Plate provides two surfaces in one plate for Bambu Lab users. It suits those who switch between strong adhesion and easy removal regularly.
BIQU 257x257mm PEO and PEI Build Plate
Best for: Bambu Lab users wanting dual-sided printing
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Build Surface Type
- Smooth PEO, textured PEI
- Build Plate Material
- PEI, Spring Steel, PEO
View on Amazon: BIQU 257x257mm PEO and PEI Build Plate Affiliate link
This BIQU Designer Series build plate fits 257x257mm beds, including Bambu Lab P1, P1S, P2S, X2D, X1, X1E, and A1 models. It uses a spring steel base with a dual-sided surface: smooth PEO on one side and textured PEI on the other. The magnetic attachment allows for easy print removal by bending the plate. It offers high temperature stability and flatness for reliable adhesion.
Pros
- Dual-sided surface with smooth PEO and textured PEI options
- Compatible with 257x257mm beds for multiple Bambu Lab models
- Magnetic spring steel base for easy print removal
- High temperature stability and flat construction
Cons
- Requires disabling build plate detection on P2S and X2D printers
- Only includes one surface finish combination per plate
- No mention of included installation tools or adhesives
Good fit if
- You want dual-sided printing options on one plate
- You own a Bambu Lab printer with a 257x257mm bed
- You prefer magnetic plates for easy print removal
Skip if
- You need a plate for a bed size other than 257x257mm
- You want to keep build plate detection enabled on P2S or X2D
- You prefer a single-sided surface only
Verdict: BIQU Designer Series PEI Build Plate 257x257mm is a practical upgrade for users who want dual surface options. It fits specific Bambu Lab models well, though you must disable detection on some units.
Specifications side by side
| Spec | UniTak3D 257x257mm Double-Sided PEI Build Plate | BIQU 257x257mm PEO and PEI Build Plate |
|---|---|---|
| Primary Material | Spring Steel | Spring steel |
| Dimensions | 257x257mm | 257x257mm |
| Maximum Temperature | 300℃ | not stated |
| Build Surface Type | Smooth & Textured PEI | Smooth PEO, textured PEI |
| Build Plate Material | PEI, Spring Steel | PEI, Spring Steel, PEO |
| Build Plate Size | 257x257mm | 257x257mm |
| Surface Finish | Smooth, Textured | Smooth, Textured |
| Size | for Bambu Lab A1/P2S/P1S/P1P/X1C/X1/X1E/X2D | P1/P2/X1/A1/X2D |
| Color | Double Sided Smooth&Textured | PEO+PEI-Black/Gold |
| Model | Uni104A1P | not stated |
Frequently asked questions
Which build plate works best for Bambu Lab A1 and P2S printers?
Both UniTak3D and BIQU offer plates sized for these models. The UniTak3D option is a double-sided PEI plate with smooth and textured finishes. The BIQU plate combines PEO and PEI coatings on a spring steel base. You should choose based on whether you prefer pure PEI or the hybrid PEO/PEI surface.
What is the difference between PEI and PEO coatings?
PEI provides a textured surface for strong adhesion and a smooth side for easy removal. PEO is a different coating material often used with PEI. The BIQU plate uses a PEO and PEI combination, while the UniTak3D plate uses two PEI surfaces. Your choice depends on your preferred filament release characteristics.
Do these plates fit the Bambu Lab X1C printer?
Yes, both brands list compatibility with the X1C. The UniTak3D plate explicitly includes the X1C in its size specifications. The BIQU plate also lists the X1 model. Both plates share the 257x257mm dimension required for these larger build volume printers.
Is glue necessary for printing on the textured side?
No, glue is generally not needed on the textured side. The UniTak3D textured PEI side offers strong adhesion without additional adhesives. This surface keeps models firmly attached during printing. You can simply let the part cool and pop it off.
Can I use these plates for PLA printing without glue?
You can use the textured side for PLA without glue. The UniTak3D smooth side requires glue sticks for most filaments except PLA. The BIQU plate provides dual surfaces to handle different material needs. You should verify the specific surface finish required for your filament type.
What colors are available for the BIQU build plate?
The BIQU plate comes in a black and gold color scheme. This corresponds to the PEO and PEI coating combination. The UniTak3D plate is described as double-sided smooth and textured without specific color details. You should check the product image for exact visual confirmation.
Are these plates compatible with the Bambu Lab X2D?
Yes, both brands support the Bambu Lab X2D. The UniTak3D specs list the X2D alongside other models. The BIQU plate also includes the X2D in its compatibility list. Both plates maintain the standard 257x257mm size for these newer printer models.