UJOY3D 8 Color Bundle Hyper PLA+ 3D Printer Review: Who It Fits and Who Should Skip It

What stands out

• Hyper PLA+ formula offers better toughness than standard PLA
• Eight spools with individual vacuum moistureproof packaging
• Diameter accuracy of ±0.03mm for stable printing
• Recommended nozzle temperature range of 205–220°C
• Print speed support up to 400 mm/s

Who it fits

Key specs explained

1.75mm diameter

This is the standard thickness for most FDM 3D printers. You can use this filament with nearly any desktop machine without needing special adapters. It ensures consistent extrusion through the nozzle, which helps maintain uniform layer height and reduces the risk of clogs during your prints.

±0.03mm accuracy

This tolerance indicates tight control over the filament diameter. Consistent thickness prevents over-extrusion or under-extrusion, leading to smoother surface finishes. You will experience fewer print failures and less need for manual calibration. This precision is crucial for achieving detailed models with reliable dimensional accuracy.

205–220°C nozzle temperature

This range tells you the ideal heat settings for melting the material. Staying within these limits ensures the filament flows smoothly without burning or degrading. You should start near the lower end and adjust slightly based on your printer’s specific hotend performance for optimal layer adhesion and finish.

55–65°C bed temperature

This setting helps the first layer stick securely to the build plate. Maintaining this range prevents warping or detachment during long prints. You can expect reliable adhesion with standard PEI or glass surfaces. Proper bed heating is essential for preventing print failures, especially with larger or taller objects.

200-400 mm/s printing speed

This wide range allows you to balance quality and speed. You can print slowly for high-detail miniatures or quickly for functional prototypes. Hyper PLA+ supports faster speeds without sacrificing strength. This flexibility lets you adjust your workflow based on whether you prioritize fine detail or rapid production for your projects.

Design and Build Quality

According to the listing, the UJOY3D Hyper PLA+ bundle uses 100% virgin raw material. This formulation avoids recycled impurities, which helps ensure stable properties from batch to batch. The result is a filament with low odor and high purity. You get better durability and fine shaping compared to regular PLA. This makes it suitable for daily projects and creative prints where consistency matters. The material is modified for optimized toughness, allowing for balanced printability without sacrificing strength.

The bundle includes eight spools, each weighing 0.25kg, for a total weight of 2kg. The filament diameter is 1.75mm with an accuracy of ±0.03mm. This precision ensures consistent extrusion through the nozzle, reducing failed prints and saving material. The spools fit most FDM 3D printers. You can also print a small spool adapter for a better experience if your machine has limited space. The packaging is individually vacuum sealed with desiccant to keep the filament dry during storage or transit.

The finish is described as glossy and full surface. The colors are uniform with anti-fading properties, ensuring stable color display even during long prints. The recommended settings include a nozzle temperature of 205–220°C and a bed temperature of 55–65°C. Printing speeds can range from 200 to 400 mm/s. This design supports smooth, continuous printing with no tangling or clogging, making it practical for users who want reliable results without frequent interruptions.

Setup And Everyday Use

The UJOY3D Hyper PLA+ bundle arrives in individually vacuum-sealed spools with desiccant. This packaging isolates moisture during transit and storage, keeping the filament dry. You do not need to dry the spools before use if you store them properly. Each spool weighs 0.25kg. The total bundle weight is 2kg. The 1.75mm diameter fits most FDM 3D printers. You can load these spools directly into standard filament paths. If your printer has a small spool holder, you may need a simple adapter for better feeding. The listing states the filament has no tangling or knotting. This feature supports stable continuous printing. You can expect reduced failed prints and saved material. For daily use, the recommended settings are straightforward. Set the nozzle temperature between 205°C and 220°C. Use 210°C for the first layer. The heated bed should be set between 55°C and 65°C. You can print at speeds ranging from 200mm/s to 400mm/s. The Hyper PLA+ formula offers better toughness than standard PLA. It provides balanced printability for daily and creative projects. The eight colors include vibrant, uniform tones with anti-fading properties. You get stable color display on glossy surfaces. The pure raw material ensures steady quality from batch to batch. No recycled impurities means consistent extrusion. This setup allows you to start printing immediately after unpacking. The vacuum seal preserves the material until you are ready to use it.

Before you buy this filament

You need an FDM 3D printer to use this UJOY3D Hyper PLA+ bundle. The listing confirms compatibility with most standard machines. You should verify your printer accepts 1.75mm diameter filament. This is the standard size, so you likely already own a compatible device. The bundle includes eight spools of 0.25kg each. You may want to print small spool adapters if your printer struggles with smaller reels. The filament supports speeds up to 400 mm/s. You should check your printer’s max speed to ensure it can handle these settings. No special maintenance is required beyond keeping the vacuum-sealed spools dry. This product fits into the broader category of 3D Printers & Making Tools as a consumable material. It does not replace the printer itself. You buy this to print more objects, not to add a new machine. It complements your existing hardware by providing multi-color options for creative projects.

Check before you buy

• Confirm your printer uses 1.75mm filament.
• Check if your printer supports speeds over 200 mm/s.
• Verify you have space for eight small spools.
• Ensure you own an FDM 3D printer.

The product at a glance

1

UJOY3D Hyper PLA+ 8-Color Bundle

Best for: Multi-color printing with manual or mixing setups

Material Type

Hyper PLA+

Filament Diameter

1.75mm

Net Weight

2kg

Max Print Speed

400 mm/s

Dimensional Accuracy

±0.03mm

Surface Finish

Glossy

View on Amazon: UJOY3D Hyper PLA+ 8-Color Bundle Affiliate link

This UJOY3D bundle includes 2kg of Hyper PLA+ filament in eight distinct colors. Each 0.25kg spool maintains a tight 1.75mm diameter with ±0.03mm accuracy. The material offers improved toughness over standard PLA and supports high speeds up to 400 mm/s. You get individually vacuum-sealed spools to prevent moisture damage. It suits makers who want vibrant, multi-color prints without handling complex mixing hardware.

Pros

• Hyper PLA+ formula provides better toughness than standard PLA
• Eight popular colors included in a single 2kg bundle
• Supports printing speeds up to 400 mm/s
• Individually vacuum-sealed spools with desiccant for moisture protection
• ±0.03mm diameter accuracy ensures stable extrusion

Cons

• Requires a multi-color mixing system or manual spool swaps
• Small 0.25kg spools may need adapters for some printers
• Limited to 1.75mm filament diameter

Good fit if

• You want to add color variety to your prints
• You use a multi-color mixing setup or swap spools manually
• You need moisture-safe packaging for long-term storage

Skip if

• You only print in single solid colors
• You require large 1kg or 2kg spools for continuous runs
• You are using a printer that does not support 1.75mm filament

Verdict: UJOY3D Hyper PLA+ 8-Color Bundle delivers tough, fast-printing filament in a convenient multi-color pack. It fits makers who already have or plan to buy a multi-color system and want to avoid moisture issues.

Specifications side by side

Frequently asked questions

See also

• ujoy3d 8 color bundle hyper pla 3d printer alternatives
• ujoy3d hyper pla 8 color bundle vs 4kg elite pla bundle
• flashforge ad5x multi color 3d printer review
• xerox c310dni color printer review