Sovol Capricorn XS 2-Meter Bowden Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This sovol creality capricorn 2 meters review focuses on the XS Series PTFE Bowden Tubing designed for 1.75mm filaments. You get a 2-meter length of blue tubing that fits Bowden extruder setups. The inner diameter is 1.9mm, which reduces internal wiggle room. The material includes high lubricity additives to lower friction. These two specs, the precise inner diameter and the lubricated PTFE construction, define how this tube performs during long-distance filament transport.
What stands out
- 1.9mm ± 0.05mm inner diameter reduces buckling in the tube
- High lubricity additives provide the lowest friction on the market
- 2-meter length supports extended Bowden systems
- PTFE material resists higher temperatures than standard TL series
- Blue color makes the tubing easy to identify in your printer
Who it fits
Good fit for
You should buy this if you run a Bowden extruder setup and need a longer tube. The 2-meter length is ideal for printers with extended travel distances. The 1.9mm inner diameter helps when printing flexible filaments, as it minimizes buckling. The low friction also reduces wear on your extruder gears. If you want smoother retraction and fewer print errors, this tube fits your needs.
Who should skip it
Skip this if you use a direct drive extruder, as this tubing is built for Bowden systems. You might also look elsewhere if you need a 1-meter or 5-meter length instead of the 2-meter option. The data does not mention compatibility with larger filament sizes like 2.85mm. If your printer requires a specific inner diameter other than 1.9mm, this tube will not work for your setup.
Verdict: This 2-meter PTFE tube offers low friction and a tight inner diameter for Bowden setups. It is a solid upgrade for users needing longer runs or better flexibility handling.
Key specs explained for this tubing
Primary Material: PTFE
This tubing is made from Polytetrafluoroethylene, a plastic known for its smooth surface. You benefit from low friction, which helps filament move easily through the extruder. This reduces wear on your printer parts and prevents jams. PTFE is the standard choice for Bowden setups, ensuring reliable performance with most common filaments.
Size: 2 Meter
You receive a 2-meter length of tubing, which equals 78.7 inches. This length suits standard desktop 3D printers with Bowden extruder configurations. It provides enough reach from the extruder motor to the hotend without excess slack. If your printer requires a longer path, you can choose the 5-meter option listed in the variations.
Inner Diameter: 1.9mm
The tube has a 1.9mm inner diameter, which is slightly larger than the 1.75mm filament. This tight fit reduces internal wiggle room and prevents buckling. You get more accurate prints, especially when using flexible filaments on long Bowden systems. It also helps minimize retraction issues, saving time and material during your prints.
Color: Blue
The tubing is blue, making it visually distinct from standard white or gray PTFE tubes. This helps you identify the high-performance XS Series quickly during installation or maintenance. The color does not affect performance but aids in organizing your printer parts. It matches the aesthetic of many modern 3D printer builds.
Design and Build Analysis
According to the listing, this tubing is constructed from PTFE, a material chosen for its smooth internal surface. This composition supports the claim of high lubricity additives, which aim to reduce friction significantly. Lower friction translates to less resistance as filament travels from the spool to the nozzle. This design choice helps minimize wear on your extruder gears and reduces the likelihood of slippage during operation. The advanced material properties also suggest better resistance to higher temperatures compared to standard options.
The physical dimensions are straightforward. You receive a 2-meter length of blue tubing, which measures 78.7 inches in total. This size is intended for Bowden extruder setups, allowing for longer filament paths than direct drive systems. The inner diameter is specified as 1.9mm, with a tolerance of plus or minus 0.05mm. This tighter specification reduces internal wiggle room, which can prevent buckling. This feature is particularly useful when printing flexible filaments on longer Bowden systems, as it maintains filament integrity during retraction.
The blue color helps you identify the tubing easily within your printer assembly. While the listing mentions various size options like 1-meter or 5-meter variants, this specific unit is the 2-meter version. The design focuses on responsiveness and accurate prints by lowering retraction times. This practical build quality supports efficient printing workflows without requiring complex installation procedures.
Setup And Daily Use Guide
This tubing is designed for Bowden extruder setups. You install it between your extruder stepper motor and the hotend. The 2-meter length provides ample slack for most printer frames. The blue color helps you identify the filament path quickly. This visual cue simplifies maintenance checks.
The 1.9mm inner diameter is critical for your setup. It reduces the wiggle room inside the tube. This tight fit minimizes buckling during filament movement. You can print flexible filaments even on long Bowden systems. The reduced space prevents the filament from bending excessively. This stability leads to more accurate prints.
Daily use benefits from the high lubricity additives. These additives lower friction significantly. Your extruder moves filament with less resistance. This results in less retraction time. You save time during printing cycles. The extruder experiences less wear and tear. This extends the life of your printer components.
The Capricorn XS Series handles higher temperatures. You can operate at temperatures above standard PTFE limits. This allows for a wider range of materials. You do not need to worry about heat degradation during normal prints. The tubing maintains its shape and smoothness. This consistency ensures reliable performance over time.
You replace old, worn tubing with this 2-meter option. The installation is straightforward. Cut the tubing to your printer’s specific length. Connect it securely to the extruder and hotend. The blue color makes future replacements easy to spot. This product is a direct upgrade for your Bowden setup.
Before you buy this tubing
You need to verify your printer’s Bowden tube dimensions before ordering. This 2-meter length suits most standard frames, but check your specific model’s requirements. You will also need compatible 1.75mm filament to ensure smooth feeding. The 1.9mm inner diameter helps reduce buckling, but confirm your hotend accepts this specific size. Regular cleaning of the tube interior is recommended to maintain low friction. Dust and filament debris can accumulate over time, affecting print quality. You should inspect the tubing for cracks or wear after extended use. This product fits into the broader category of 3D Printers & Making Tools as a replacement part. It complements other Bowden setups by offering advanced material properties. Consider how it aligns with your current extruder configuration. If you print flexible filaments, the reduced wiggle room is beneficial. Ensure your printer’s firmware supports the retraction settings this tubing enables. This item is not a complete printer but a crucial component for optimal performance. It works alongside other tools to enhance your printing experience.
Check before you buy
- Verify your printer uses a Bowden extruder setup.
- Confirm the 1.9mm inner diameter fits your hotend.
- Check that 2 meters matches your printer's frame size.
- Ensure you have compatible 1.75mm filament ready for use.
The product at a glance
Sovol Capricorn XS 2-Meter Bowden Tubing
Best for: flexible filament printing on bowden systems
- Primary Material
- PTFE
- Extruder Type
- Bowden Extruder
- Color
- Blue
- Length
- 78.7 inches
- Width
- 78.7 inches
View on Amazon: Sovol Capricorn XS 2-Meter Bowden Tubing Affiliate link
This is a 2-meter blue PTFE bowden tube designed for 1.75mm filament. It features an inner diameter of 1.9mm ± 0.05mm to reduce buckling. The tubing includes high lubricity additives for lower friction. This allows for more responsive prints and less extruder wear. You should use it if you want to print flexible filaments on long bowden systems with improved accuracy.
Pros
- 1.9mm inner diameter reduces buckling
- High lubricity for lower friction
- Resists higher temperatures than standard TL
- Blue color for easy identification
Cons
- Limited to 2-meter length
- Only available in blue
- Requires existing bowden extruder setup
Good fit if
- You need a 2-meter replacement tube
- You print flexible filaments
- You want lower friction performance
Skip if
- You require direct drive extruders
- You need 5-meter lengths
- You prefer gray or white tubing
Verdict: Sovol Capricorn XS 2m Blue Bowden Tube offers precise 1.9mm inner diameter for flexible filament printing. It suits users upgrading long bowden systems for better responsiveness.
Specifications side by side
| Spec | Sovol Capricorn XS 2-Meter Bowden Tubing |
|---|---|
| Primary Material | PTFE |
| Extruder Type | Bowden Extruder |
| Color | Blue |
| Length | 78.7 inches |
| Width | 78.7 inches |
| Size | 2 Meter |
Frequently asked questions
Is this tube compatible with flexible filaments?
Yes, this tubing is designed for flexible filament printing on bowden systems. The 1.9mm inner diameter reduces internal wiggle room, which helps maintain control over soft materials. This precise fit supports better responsiveness during extrusion, making it suitable for users who frequently print with flexible plastics.
What is the exact length of the tubing?
The package contains a 2-meter length of tubing. This measurement converts to 78.7 inches, providing ample slack for most standard printer frames. The extended length allows for flexible routing within the printer chassis, ensuring you can connect the extruder to the hotend without tension.
Does this product work with Creality printers?
This review covers the Sovol Capricorn XS tubing, which is compatible with bowden extruder setups found in many Creality and Sovol printers. The 1.9mm inner diameter is standard for 1.75mm filament systems. You can use it to upgrade existing long bowden runs for improved performance.
What color is the Capricorn XS tubing?
The tubing is blue. This color coding helps you easily identify the filament path within your printer. Clear visual distinction aids in maintenance and troubleshooting, allowing you to quickly locate the tube during inspections or when replacing worn sections of your bowden system.
Can I use this for direct drive printers?
No, this product is specifically designed for bowden extruder configurations. It is not intended for direct drive setups where the extruder is mounted directly on the hotend. Ensure your printer uses a bowden tube layout before purchasing, as the 2-meter length is unnecessary and incompatible with direct drive mechanics.
What inner diameter does this tube have?
The tube features a 1.9mm inner diameter. This specific dimension is optimized for 1.75mm filaments, reducing internal play to improve feeding accuracy. The tight tolerance helps prevent filament buckling, especially when pushing flexible or soft materials through longer distances within the bowden setup.