R QIDI Technology QIDI Technology 1.75mm PA12-CF Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This r qidi technology pa12 cf carbon fiber nylon review covers a 1.75mm spool designed for high-performance prints. The material blends 85% PA12 with 15% carbon fiber to boost strength and rigidity. It comes in a 1kg vacuum-sealed package to protect against moisture. The filament supports a max print speed of 60mm/s. These specs make it suitable for durable parts that require dimensional stability and resistance to wear. You get a black spool that is tangle-free and ready for use without immediate drying.
What stands out
- 85% PA12 and 15% carbon fiber blend for superior toughness
- Low moisture sensitivity with a saturated absorption rate one-tenth that of PA6
- Vacuum aluminum foil packaging with a 0.014% water vapor transmission rate
- Recommended extruder temperature of 280℃ and bed temperature of 80℃
- Dimensional stability with no warping and minimal shrinkage during printing
Who it fits
Good fit for
You should choose this filament if you need parts that withstand impact, chemicals, and high temperatures. It suits users printing functional components, tools, or wear-resistant items. The low moisture sensitivity means you can open the vacuum pack and print immediately. If you have a printer capable of 280℃ extrusion and 80℃ bed heating, this material will provide excellent layer adhesion and surface finish without warping.
Who should skip it
You should skip this option if your printer cannot reach 280℃ or 80℃. The recommended print speed is limited to 60mm/s, which may be too slow for rapid prototyping. If you need faster production cycles, consider other materials. Also, avoid this if you lack a hardened steel nozzle, as carbon fiber can wear standard brass tips quickly. The black color is fixed, so you cannot use it for multi-color projects.
Verdict: This filament offers robust mechanical properties and stability for demanding applications. It is a reliable choice for users with compatible hardware who need durable, wear-resistant parts.
Key specs for PA12-CF filament
Material Type: PA12-CF
This listing blends 85% PA12 nylon with 15% carbon fiber. You get a composite that offers superior strength and rigidity compared to standard nylon. The carbon fibers improve impact resistance and reduce wear. This mix is ideal if you need durable parts that withstand mechanical stress. It suits users printing functional components rather than decorative models.
Filament Diameter: 1.75mm
The filament measures 1.75mm in width, which is the standard size for most desktop 3D printers. You can load this spool into nearly any consumer-grade machine without adapters. This common diameter ensures compatibility with standard extruders. Check your printer specifications to confirm it supports this size before purchasing, as it is the industry norm.
Net Weight: 1kg
Each spool contains exactly 1 kilogram of material. This weight provides a substantial amount of filament for large or multi-part prints. You get enough volume to complete significant projects without frequent spool changes. This standard size fits most printer build volume calculations. It offers a practical balance between storage space and printing capacity for your workshop.
Max Print Speed: 60mm/s
The recommended maximum printing speed is 60mm per second. This moderate pace ensures stable layer adhesion and surface quality for this composite material. Faster speeds may cause issues with the stiff carbon fiber blend. You should set your slicer software to respect this limit for best results. It balances production time with the mechanical integrity of your printed parts.
Design and Build Specs
According to the listing, this material blends 85% PA12 with 15% carbon fiber. This composite structure delivers high rigidity and impact resistance. You get a filament that resists wear and chemicals better than standard nylon. The formulation also reduces shrinkage and warping during the print process. This stability helps you maintain precise dimensions for functional parts.
The spool holds 1kg of black filament with a consistent 1.75mm diameter. It measures 8.66 inches in width, 1.97 inches in height, and 8.27 inches in length. The filament is vacuum-sealed in aluminum foil to block moisture. This packaging allows you to open the spool and print immediately without a drying cycle. The low moisture sensitivity ensures your mechanical properties remain strong even after exposure to humidity.
Printing requires specific settings to handle the composite nature of the material. The listing suggests an extruder temperature of 280℃ and a heated bed at 80℃. You should keep the print speed around 60mm/s for best results. These parameters help manage the stiffness of the carbon fiber blend. You will likely use this filament for durable, high-stress components. The combination of strength and dimensional accuracy makes it suitable for engineering applications where standard plastics might fail.
Setup and Daily Use Guide
You need specific hardware to print this material effectively. The listing recommends using a dedicated carbon fiber printer, such as the QIDI TECH X-CF. This machine handles the abrasiveness of the 15% carbon fiber blend. You must set your extruder temperature to 280°C. The heated build platform should be maintained at 80°C. These high temperatures are necessary for proper layer adhesion and material flow.
Daily operation involves managing the spool carefully. The filament is wound to prevent tangling. You can open the vacuum aluminum foil package and begin printing immediately. The manufacturer states the water vapor transmission rate is only 0.014%. This low moisture sensitivity means you do not need to dry the filament before use. The material absorbs only one-tenth the moisture of standard PA6 nylon.
You should print at a controlled speed of 60mm/s. This speed ensures dimensional stability and a smooth surface finish. The carbon fiber content reduces shrinkage and warping. This allows for high success rates even on complex structures. The 1.75mm diameter ensures compatibility with standard hotends, provided they are hardened. The black color hides layer lines well. You get consistent results without frequent calibration. The packaging keeps the filament dry until you are ready to print. This setup simplifies the workflow for technical parts.
Before You Buy This Filament
You need to verify your printer hardware before loading this spool. The listing specifies a maximum print speed of 60mm/s. This is slower than standard PLA. You must ensure your extruder can handle the abrasiveness of the 15% carbon fiber blend. A hardened steel nozzle is essential to prevent rapid wear. You also need to check your slicer settings. The recommended extruder temperature is 280°C. Your heated bed must maintain 80°C for proper adhesion. This material comes in a 1kg vacuum-sealed package. You can open it without immediate drying, but you should store it in a dry box after opening. This spool fits alongside other engineering materials like PET-CF and ABS-GF25. It suits users who need high rigidity and chemical resistance. If you require high-speed printing, this may not be the best fit. Ensure your setup matches these strict thermal and mechanical requirements.
Check before you buy
- Verify your printer has a hardened steel nozzle.
- Confirm your extruder reaches 280°C without issues.
- Ensure your heated bed maintains 80°C steadily.
- Check if your slicer supports carbon fiber profiles.
- Have a dry storage box ready for after opening.
The product at a glance
QIDI Technology 1.75mm PA12-CF Nylon Filament
Best for: durable functional parts with high strength
- Material Type
- PA12-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Compatible Material
- Nylon
- Features
- Carbon Fiber
- Color
- Black
View on Amazon: QIDI Technology 1.75mm PA12-CF Nylon Filament Affiliate link
This is a 1.75mm carbon fiber nylon filament designed for high-strength prints. It blends 85% PA12 with 15% carbon fiber for rigidity and impact resistance. The material offers low moisture sensitivity and comes in a vacuum-sealed 1kg spool. It supports a maximum print speed of 60mm/s. You should use this filament if you need durable, dimensionally stable parts with excellent surface finish.
Pros
- 85% PA12 and 15% carbon fiber blend for high strength
- Vacuum aluminum foil packaging prevents moisture absorption
- Low shrinkage and warping for stable prints
- 1.75mm diameter for standard extruders
Cons
- Maximum print speed limited to 60mm/s
- Requires specific settings like 280°C nozzle temperature
- Only available in black color
Good fit if
- You need parts with high rigidity and impact resistance
- You want to avoid drying the filament before printing
- You are printing complex structures that require dimensional stability
Skip if
- You require high-speed printing above 60mm/s
- You need multi-color prints and prefer other colors
- You do not have a printer capable of 280°C nozzle temperatures
Verdict: QIDI Technology PA12-CF 1.75mm Filament is a specialized material for users who prioritize mechanical strength and moisture resistance over print speed. It fits buyers making durable functional parts who can manage specific temperature and speed settings.
Specifications side by side
| Spec | QIDI Technology 1.75mm PA12-CF Nylon Filament |
|---|---|
| Material Type | PA12-CF |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Compatible Material | Nylon |
| Features | Carbon Fiber |
| Color | Black |
| Dimensions | 8.27 × 8.66 × 1.97 inches |
| Size | EasePA12-CF |
| Model | CFUSQD21 |
Frequently asked questions
What is the best printer for QIDI Technology PA12-CF?
The listing recommends using a dedicated carbon fiber printer, such as the QIDI TECH X-CF. This machine is designed to handle the abrasiveness of the 15% carbon fiber blend. Standard printers may suffer from extruder wear. Using the recommended hardware ensures reliable prints and protects your equipment from damage caused by the composite material.
What is the maximum print speed for this filament?
The listing specifies a maximum print speed of 60mm/s. This is slower than standard PLA or basic nylon filaments. You must adjust your slicer settings to stay within this limit. Printing faster can lead to poor layer adhesion or extruder issues due to the abrasive nature of the carbon fiber reinforcement.
Is this filament suitable for functional parts?
Yes, it is ideal for durable functional parts with high strength. The blend of 85% PA12 and 15% carbon fiber boosts mechanical performance. It offers superior rigidity and impact resistance compared to standard nylon. You get a material that resists wear and chemicals, making it suitable for parts that need to withstand stress and environmental factors.
What color is the QIDI Technology PA12-CF filament?
The filament is black. This color is consistent across the 1.75mm spool. The black hue comes from the carbon fiber additive mixed with the PA12 nylon base. You get a uniform appearance for your prints. The color does not affect the mechanical properties, which are driven by the composite structure of the material.
How does the packaging protect the filament?
The listing indicates the filament comes in a 1kg vacuum-sealed package. This method protects the material against moisture absorption. Nylon is highly hygroscopic, so keeping it dry is crucial for print quality. The vacuum seal ensures the filament remains stable until you open it. Proper storage after opening is still recommended to maintain performance.
What is the composition of this carbon fiber nylon?
The material blends 85% PA12 nylon with 15% carbon fiber. This specific ratio creates a composite that enhances strength and rigidity. The carbon fibers improve impact resistance and reduce wear on the printed parts. You get a material that performs better in mechanical applications than pure nylon, offering a balance of durability and printability for advanced users.