LOVOON Silk Tricolor PLA 1kg Review: Specs, Pros and Cons

What stands out

• Silk surface finish that changes color by angle
• 1.75mm diameter with +/- 0.02mm tolerance
• 1kg net weight per spool
• Recommended print speed up to 200mm/s
• Vacuum sealed with desiccants for moisture protection

Who it fits

Key specs for this filament

Material Type: PLA

This filament uses polylactic acid, a biodegradable plastic derived from renewable resources like corn starch. You will find it easy to load and remove from your printer. It produces low odor during printing, making it safe for indoor use. It is the standard choice for beginners and general prototyping. Compare it to ABS or PETG if you need higher heat resistance, but PLA offers superior ease of use and surface finish for most hobbyist projects.

Filament Diameter: 1.75mm

This is the standard width for most FDM 3D printers. You can use it with almost any desktop printer or 3D pen without needing adapters. The consistent round shape ensures smooth feeding into the extruder. If your printer requires 2.85mm or 1.75mm, this specification confirms compatibility. Always check your printer manual before buying. This standard size allows you to swap brands easily when comparing options for your specific machine.

Dimensional Accuracy: +/- 0.02mm

The diameter varies by only two hundredths of a millimeter from the target size. This tight tolerance prevents jams and ensures consistent extrusion. You will get smoother prints with fewer clogs or under-extrusion issues. Compare this to cheaper filaments that may have wider variances. This precision is critical for detailed models where layer consistency matters. It helps maintain the structural integrity of your prints without requiring frequent manual adjustments to your printer settings.

Surface Finish: Silk

This filament has a glossy, metallic-like sheen that reflects light differently than standard matte PLA. You will notice a dynamic color shift as you change the viewing angle. This finish enhances visual appeal for decorative items and miniatures. It is not suitable for functional parts where a matte texture is preferred for grip. Compare it to standard PLA if you want a premium look without post-processing. The silk texture adds depth to your prints, making colors appear more vibrant and engaging.

Net Weight: 1kg

Each spool contains one kilogram of filament, providing a standard amount for various project sizes. This weight balances cost and convenience for most hobbyists. You can print several medium-sized objects before needing a replacement. Compare this to 0.5kg or 2kg options if you have specific storage or budget constraints. The 1kg size is widely available and fits most standard spool holders. It offers a practical volume for testing new materials or colors without committing to a larger bulk purchase.

Design and Build Quality

According to the listing, this filament uses PLA, a biodegradable plastic derived from renewable resources like corn starch. The material features a silk finish that shifts color based on the viewing angle. This specific surface texture creates intricate and dynamic designs in triple colors simultaneously. You will notice different effects depending on how the model is positioned. The color combination includes orange, green, and blue shades. This visual property allows for unique aesthetic results without requiring complex multi-material setups. The design relies on the inherent properties of the filament rather than external additives.

The spool contains 1kg of material with a diameter of 1.75mm. The dimensional accuracy is listed at +/- 0.02mm. This tight tolerance helps ensure smoother 3D printing without jamming or bubbling. The filament is compatible with most FDM 3D printers and 3D pens in the market. The package is vacuum sealed with desiccants to protect against moisture. It is completely dried for 24 hours before packaging. This moisture-proof design helps maintain print quality over time. The spool weighs 2.4 pounds. The physical layout is designed for standard printer spools. You can load it directly into your printer without additional adapters. The gift packaging makes it suitable for giving to others. This build quality supports consistent performance across various printing projects.

Setup and Everyday Use

You load the 1.75mm spool into your FDM printer. The dimensional accuracy of +/- 0.02mm helps ensure smooth feeding. This tolerance reduces the risk of jamming or bubbling during the print process. You should verify that your printer nozzle is 0.4mm or larger. Using a smaller nozzle may cause issues with this specific material.

For daily printing, you set the extruder temperature between 190°C and 230°C. The bed temperature should be set to 60°C. These settings support the silk finish and the tricolor effect. You can print at speeds ranging from 30mm/s to 200mm/s. However, for better smoothness and success, the listing recommends keeping the speed below 150mm/s. This caution helps maintain the integrity of the color-shifting surface.

The filament arrives vacuum-sealed with desiccants. It has been dried for 24 hours before packaging. This moisture-proof package protects the PLA from humidity. You can keep the spool in its sealed bag when not in use to preserve quality. The packaging is designed for gifting, but you can reuse it for storage.

This filament works with most FDM 3D printers and 3D pens. You do not need special hardware to use it. Just load the spool and adjust your slicer settings to the recommended temperatures. The tricolor design changes based on the viewing angle. You will see different effects depending on how you orient the model. This feature adds visual interest to your everyday prints without requiring complex multi-material setups.

Before You Buy This Filament

You will need to verify your printer’s nozzle size. The listing specifies a minimum of 0.4mm for optimal smoothness. Smaller nozzles may clog with this tricolor blend. You should also check your printer’s compatibility with PLA. Most FDM machines handle this material well. Keep the spool in its vacuum-sealed bag when not in use. The product arrives dried for 24 hours, but humidity can return quickly. Use a dry box if you print frequently. This filament sits alongside other PLA options in our guide. It offers unique visual effects rather than pure strength. If you need structural parts, consider standard PLA. If you want dynamic colors, this silk tricolor is a strong choice. You may also need extra spools for large projects. The 1kg weight is standard, but larger sizes are available in variations. Plan your prints around the recommended speed limits. Staying under 150mm/s ensures better results with the color shifting effect.

Check before you buy

• Verify your printer uses a 0.4mm or larger nozzle.
• Ensure your FDM printer is compatible with PLA material.
• Check if you have a dry storage solution for the spool.
• Confirm you can maintain print speeds under 150mm/s.
• Review other PLA options if you need high structural strength.

The product at a glance

1

LOVOON Silk Tricolor PLA 1kg

Best for: dynamic multi-color FDM prints

Material Type

PLA

Filament Diameter

1.75mm

Net Weight

1kg

Max Print Speed

200mm/s

Dimensional Accuracy

+/- 0.02mm

Surface Finish

Silk

View on Amazon: LOVOON Silk Tricolor PLA 1kg Affiliate link

This LOVOON filament is a 1.75mm PLA spool featuring a unique silk tricolor finish in orange, green, and blue. The colors shift based on viewing angle, allowing for dynamic, multi-colored prints without complex slicing setups. It maintains a tight dimensional accuracy of +/- 0.02mm and supports print speeds up to 200mm/s. You will get smooth results with most FDM printers if you keep the nozzle at 0.4mm or larger.

Pros

• Silk tricolor finish shifts between orange, green, and blue
• Tight dimensional accuracy of +/- 0.02mm prevents jams
• Supports print speeds up to 200mm/s
• Vacuum sealed for moisture protection

Cons

• Requires a 0.4mm nozzle or larger for best results
• Print speed should stay under 150mm/s for smoothness
• Limited to specific color combinations without filament swapping

Good fit if

• You want colorful prints without multi-material complexity
• You use standard FDM printers with 0.4mm nozzles
• You need a moisture-safe spool for reliable layering

Skip if

• You require single-color solid prints
• You print with 0.2mm or smaller nozzles
• You need continuous color gradients without angle shifts

Verdict: LOVOON 1kg Silk Tricolor PLA delivers unique multi-color effects through its angle-dependent silk finish. It is a practical choice for hobbyists who want vibrant, dynamic results on standard FDM printers without managing multiple filaments.

Specifications side by side

Frequently asked questions

See also

• lovoon silk tricolor pla 1kg alternatives
• best 3d printers under 200
• the cotton silk cotton silk mulberry review
• best bookshelf speakers with silk dome tweeter