Longer LK5 Pro Large Open-Source 3D Printer vs Longer LK10 Plus High-Speed 3D Printer (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The longer lk5 pro 3 3d printer vs lk10 plus 3d printer comparison highlights two distinct approaches to large-format FDM printing. Both machines offer substantial build volumes exceeding 300mm in width and depth, along with auto-leveling and filament runout detection. The primary difference lies in their performance focus. The LK10 Plus prioritizes high-speed printing with Klipper firmware, while the LK5 Pro emphasizes structural stability and open-source customization. You must decide which feature set better supports your specific workflow requirements.
Key differences
| Aspect | Longer LK10 Plus High-Speed 3D Printer | Longer LK5 Pro Large Open-Source 3D Printer |
|---|---|---|
| Print Speed | 180mm/s | Up to 500mm/s |
| Build Volume | 300x300x400mm | 320x320x400mm |
| Firmware | Open-source | Klipper |
| Structure | Triangular frame | Dual Z-axis design |
| Extruder | Not listed | Dual-gear direct drive |
| Leveling | X and Y-axis auto calibration | Auto bed leveling with eddy current sensor |
Which one should you choose?
Choose Longer LK10 Plus High-Speed 3D Printer if
- You need open-source firmware for deep customization and G-code modifications.
- You prefer a triangular frame structure that minimizes resonance errors.
- You value a lower print speed in exchange for proven stability.
Choose Longer LK5 Pro Large Open-Source 3D Printer if
- You require the fastest possible printing speeds up to 500mm/s.
- You want a slightly larger build volume for bigger projects.
- You need Klipper firmware for enhanced motion control and acceleration.
Verdict: Choose the LK5 Pro if you prioritize open-source flexibility and a rigid triangular frame for stable, precise prints. Select the LK10 Plus if you need higher speeds, a larger build area, and advanced Klipper firmware features. Both machines handle standard FDM materials well, so your choice depends on whether you value speed or customization.
LK5 Pro vs LK10 Plus Specs
print speed
The Longer LK10 Plus offers significantly higher maximum print speeds compared to the LK5 Pro 3. The LK10 Plus supports speeds up to 500mm/s with an acceleration of 10000mm/s², powered by Klipper firmware. This allows for faster production of models with less waiting time. In contrast, the Longer LK5 Pro 3 is rated for a maximum speed of 180mm/s. While the LK5 Pro emphasizes precision and stability with its triangular structure, the LK10 Plus prioritizes rapid output. If your workflow requires quick turnaround times for large batches or complex prototypes, the LK10 Plus provides a clear advantage in velocity and acceleration capabilities.
build volume
Both printers offer large build areas, but the LK10 Plus provides slightly more width and depth. The LK10 Plus features a build volume of 320×320×400mm. The Longer LK5 Pro 3 has a build volume of 300×300×400mm. Both machines share the same Z-height of 400mm. The LK10 Plus gives you an extra 20mm in both the X and Y axes. This additional space can be useful for printing larger single objects or fitting more parts side-by-side. For most standard projects, the difference is minimal, but the LK10 Plus offers a marginally larger canvas for your designs without increasing the overall footprint significantly.
extruder type
The extruder configuration differs between the two models, which may affect material handling. The LK10 Plus is equipped with an upgraded dual-gear direct drive extruder. This design provides strong extrusion performance and smooth filament feeding, supporting high flow rates. It is compatible with a range of materials including PLA, PETG, ABS, TPU, and Nylon. The data for the LK5 Pro 3 does not specify the exact extruder gear configuration, though it mentions a Teflon tube for smooth material flow. The dual-gear system on the LK10 Plus generally offers better grip on flexible filaments like TPU, making it a stronger choice for versatile material printing.
leveling
Both printers include automatic bed leveling to simplify the setup process. The LK10 Plus uses eddy current sensor technology to automatically detect bed surface conditions and compensate in real time. It also features smart Z offset calibration to ensure accurate nozzle distance. The LK5 Pro 3 includes X and Y-axis automatic calibration technology to minimize vibrations. While the LK5 Pro focuses on axis calibration for stability, the LK10 Plus provides comprehensive auto-leveling with Z offset adjustments. This makes the first-layer printing process more reliable and easier for beginners on the LK10 Plus, reducing the need for manual adjustments.
structure
The mechanical design of each printer targets different aspects of stability. The LK5 Pro 3 features a sturdy triangular structure with reinforced inclined rods. This design minimizes errors from resonance, ensuring high precision and durability, which is ideal for home DIY and school use. The LK10 Plus data does not explicitly describe its frame geometry, but it highlights a dual Z-axis design for smoother printing. The triangular frame of the LK5 Pro offers a distinct mechanical advantage in reducing wobble during operation. If you prioritize a rigid, resonance-minimized frame for consistent quality, the LK5 Pro’s structure is a notable benefit.
open source
Customization and firmware access vary between the two machines. The LK5 Pro 3 is fully open source, featuring an open-source firmware that allows for G-code modifications. This enables advanced users to customize printing parameters and join community insights. The LK10 Plus runs Klipper firmware, which offers high-speed capabilities but does not explicitly state it is fully open source in the provided data. For tinkerers who want to modify the underlying code or explore advanced firmware tweaks, the LK5 Pro 3 provides greater flexibility and transparency. This makes it a better choice for users interested in deep technical customization.
Which 3D Printer Fits Your Needs
Speed-focused makers needing fast output
The LK10 Plus delivers up to 500mm/s print speed with 10000mm/s² acceleration. This high-performance setup reduces waiting time significantly. You get efficient production for prototyping or batch jobs. The Klipper firmware ensures stable quality at these elevated speeds, making it ideal for users who prioritize rapid turnaround without sacrificing detail.
Customizers wanting open-source flexibility
The LK5 Pro features fully open-source firmware and a motherboard. You can modify G-code and customize settings to suit specific needs. This transparency allows for deeper technical engagement. If you enjoy tweaking parameters or joining community insights, this open architecture provides the freedom to adapt the printer to your unique workflow requirements.
Users preferring stable triangular design
The LK5 Pro utilizes a sturdy triangular structure with reinforced inclined rods. This design minimizes resonance errors, ensuring higher precision and durability. The 0.1mm precision is supported by automatic X and Y-axis calibration. You benefit from reduced vibrations and consistent print quality, which is essential for detailed models and long-term reliability.
The products compared
Longer LK10 Plus High-Speed 3D Printer
Best for: Large format high-speed FDM printing
- Build Volume
- 320 × 320 × 400 mm
- Print Speed
- 500 mm/s
- Printing Technology
- FDM
- Leveling Type
- Auto Bed Leveling
- Extruder Type
- Dual-gear direct drive
- Target Audience
- Beginners
View on Amazon: Longer LK10 Plus High-Speed 3D Printer Affiliate link
The Longer LK10 Plus is an FDM 3D printer with a 320×320×400mm build volume. It features a dual-gear direct drive extruder and supports speeds up to 500mm/s. Auto bed leveling and smart Z offset simplify setup. Dual-band WiFi and power-loss recovery add convenience. This machine suits users needing large prints and fast production cycles.
Pros
- 320×320×400mm large build volume
- Up to 500mm/s print speed
- Dual-gear direct drive extruder
- Auto bed leveling with Z offset
- Dual-band WiFi connectivity
Cons
- No mention of touchscreen display
- Limited to FDM printing technology
- Requires Klipper firmware knowledge
Good fit if
- You need to print large single models
- You want faster production speeds
- You print functional prototypes with various filaments
Skip if
- You prefer resin printing technology
- You need a compact desktop size
- You want a plug-and-play experience without firmware tweaks
Verdict: The Longer LK10 Plus Large Volume Printer offers high speed and a spacious build area for large projects. It fits makers who prioritize volume and speed over compactness.
Longer LK5 Pro Large Open-Source 3D Printer
Best for: Large open-source FDM printing projects
- Build Volume
- 300*300*400mm
- Print Speed
- 180mm/s
- Printing Technology
- FDM
- Features
- Resume Printing, Open Source
- Target Audience
- Beginners
- Color
- Black
View on Amazon: Longer LK5 Pro Large Open-Source 3D Printer Affiliate link
The Longer LK5 Pro is an FDM 3D printer with a 300x300x400mm build volume. It prints at 180mm/s with 0.1mm precision. The triangular structure and silicon carbide glass bed improve stability. Open-source firmware allows customization. Filament and power sensors help resume prints. It suits beginners who need a large canvas for DIY projects.
Pros
- 300x300x400mm large build volume
- 180mm/s printing speed
- Open-source firmware for customization
- Silicon carbide lattice glass platform
- Filament and power outage detection
Cons
- No mention of Wi-Fi or remote connectivity
- Requires manual bed leveling setup
- Heavier build than compact desktop printers
Good fit if
- You need a large print area for big models
- You want to modify firmware with G-code
- You prefer a stable triangular frame structure
Skip if
- You require automatic bed leveling
- You need wireless remote printing
- You have limited desk space
Verdict: The Longer LK5 Pro 300x300x400mm FDM Printer offers a spacious build area and open-source flexibility. It fits users who prioritize print size and hardware customization over wireless convenience.
Specifications side by side
| Spec | Longer LK10 Plus High-Speed 3D Printer | Longer LK5 Pro Large Open-Source 3D Printer |
|---|---|---|
| Build Volume | 320 × 320 × 400 mm | 300*300*400mm |
| Print Speed | 500 mm/s | 180mm/s |
| Printing Technology | FDM | FDM |
| Leveling Type | Auto Bed Leveling | not stated |
| Extruder Type | Dual-gear direct drive | not stated |
| Leveling | Auto Leveling | not stated |
| Features | not stated | Resume Printing, Open Source |
| Target Audience | Beginners | Beginners |
| Color | Grey | Black |
| Dimensions | 21.7 × 22.6 × 24.6 inches | 20 × 20 × 15 inches |
| Size | 320mm×320mm | Longer-LK5 Pro |
| Model | not stated | LK5 Pro |
Frequently asked questions
Is the Longer LK10 Plus faster than the LK5 Pro?
Yes, the LK10 Plus is significantly faster. It supports print speeds up to 500mm/s with 10000mm/s² acceleration. The LK5 Pro does not list these high-speed capabilities in its specifications. You should choose the LK10 Plus if rapid output is your primary goal.
Which printer has the larger build volume?
Both printers offer large build areas, but the LK10 Plus provides a 320mm x 320mm footprint. The LK5 Pro is described as having a 300x300x400mm volume in its verdict text. The LK10 Plus offers more width and depth for wide projects.
Does the Longer LK5 Pro support open-source customization?
Yes, the LK5 Pro is explicitly labeled as an open-source 3D printer. This feature allows you to modify hardware and software freely. The LK10 Plus does not list open-source capabilities in its provided data. Choose the LK5 Pro for maximum hardware flexibility.
How do the physical dimensions of these printers compare?
The LK10 Plus is larger overall, measuring 22.6 inches wide, 24.6 inches high, and 21.7 inches long. The LK5 Pro measures 20 inches wide, 15 inches high, and 20 inches long. You need more space for the LK10 Plus in your workspace.
Can I use the LK5 Pro for large projects?
Yes, the LK5 Pro is designed for large open-source FDM printing projects. It offers a spacious build area suitable for bigger items. However, it prioritizes size and customization over the high-speed performance found in the LK10 Plus.
Is the LK10 Plus suitable for beginners?
The LK10 Plus is positioned for makers who prioritize volume and speed. The LK5 Pro specifically targets beginners in its attributes. If you are new to 3D printing, the LK5 Pro may be a more appropriate starting point based on its stated audience.
What printing technology do both machines use?
Both the LK5 Pro and LK10 Plus use FDM printing technology. This is the standard fused deposition modeling method. Both also include features like resume printing and auto-leveling. You can expect similar basic material handling from both devices.