Longer LK10 Plus High-Speed 3D Printer or Longer Direct Drive FDM 3D Printer? Which Longer Model to Buy
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the longer lk10 plus high speed 3d printer vs direct drive fdm 3d printer. Both models use FDM technology and Klipper firmware for reliable performance. They share direct drive extruders and dual-band Wi-Fi connectivity. The main difference lies in build volume and maximum print speed. The LK10 Plus offers a significantly larger printing area and higher speed capabilities. The standard LK10 focuses on a compact footprint with essential auto-leveling features.
Key differences
| Aspect | Longer LK10 Plus High-Speed 3D Printer | Longer Direct Drive FDM 3D Printer |
|---|---|---|
| Build Volume | 320×320×400mm | 8.86×8.86×10.4 in |
| Print Speed | Up to 500mm/s | not listed |
| Extruder Type | Dual-gear direct drive | Direct drive high-flow |
| Leveling Type | Auto Bed Leveling | Vortex Auto Leveling |
| Display | not listed | 4.3" full-color touch screen |
Which one should you choose?
Choose Longer LK10 Plus High-Speed 3D Printer if
- You need a large build volume for bigger models or batch production.
- You prioritize high-speed printing with up to 500mm/s capability.
- You want automatic Z offset calibration for easier first-layer setup.
Choose Longer Direct Drive FDM 3D Printer if
- You prefer a compact printer with a smaller footprint.
- You want a built-in 4.3-inch full-color touch screen.
- You need a standard 8.86-inch square build volume for small parts.
Verdict: Choose the LK10 Plus if you require a large build volume and high-speed printing for efficient production. Select the standard LK10 if you need a compact machine with a convenient touch screen interface. Both printers offer reliable direct drive extrusion and Klipper firmware for consistent results.
LK10 Plus vs LK10 Comparison
Build Volume
The Longer LK10 Plus High-Speed 3D Printer offers a significantly larger build area than the standard Longer Direct Drive FDM 3D Printer. The LK10 Plus provides a 320×320×400mm volume, allowing you to print large models or multiple parts in a single job. This spacious area reduces assembly steps for big projects. In contrast, the base model listed for the Longer Direct Drive FDM 3D Printer has an 8.86×8.86×10.4 inch volume. While the product page notes other size variations exist for that model, the primary listed specification is much smaller. If you need to print large prototypes or batch production parts without assembly, the LK10 Plus is the clear choice for its generous dimensions.
Print Speed
Speed is a major differentiator between these two machines. The Longer LK10 Plus High-Speed 3D Printer is designed for rapid output, delivering up to 500mm/s printing speed with 10000mm/s² acceleration. This high-speed capability improves efficiency while maintaining stable quality, helping you create models faster with less waiting time. The specifications for the Longer Direct Drive FDM 3D Printer do not list a maximum print speed. Although it uses a Klipper high-speed mainboard, the lack of a stated speed limit makes direct comparison difficult. For users prioritizing quick turnaround times on standard materials, the LK10 Plus offers verified high-speed performance.
Leveling System
Both printers feature automatic bed leveling, but they use different technologies. The Longer LK10 Plus High-Speed 3D Printer utilizes eddy current sensor technology. This system automatically detects bed surface conditions and compensates in real time. It also includes automatic Z offset calibration, ensuring accurate nozzle distance for reliable first-layer printing. The Longer Direct Drive FDM 3D Printer uses Vortex auto bed leveling. This system handles nozzle height calibration and semi-auto X/Y belt tensioning. While both systems aim to reduce calibration hassle, the LK10 Plus provides specific details on real-time surface detection and Z offset accuracy, which may benefit beginners seeking consistent first layers.
Extruder Design
Both models employ direct drive extruders suitable for various filaments. The Longer LK10 Plus High-Speed 3D Printer features an upgraded dual-gear direct drive extruder. This design provides strong extrusion performance and smooth filament feeding with a high flow rate. It supports PLA, PETG, ABS, TPU, and Nylon. The Longer Direct Drive FDM 3D Printer also uses a direct drive high-flow lightweight extruder. It includes hardened steel gears, a bimetallic throat, and an upgraded hotend to avoid clogging. Both systems include filament runout detection. The LK10 Plus emphasizes dual-gear strength, while the LK10 focuses on hardened components for durability. Both are well-suited for flexible and rigid materials.
Control Interface
The user interface differs between the two models. The Longer Direct Drive FDM 3D Printer includes a 4.3-inch full-color touch screen. This display allows for local control and monitoring without needing a connected device. The specifications for the Longer LK10 Plus High-Speed 3D Printer do not mention a built-in touch screen. However, it does feature dual-band WiFi (2.4GHz and 5GHz) for stable remote control via mobile devices or computers. If you prefer tactile, on-machine control with a visual display, the LK10 is advantageous. If you rely on remote management through an app or web interface, the LK10 Plus offers robust wireless connectivity options.
Which Longer 3D Printer Fits Your Needs
You need large single-piece prints
The LK10 Plus offers a 320×320×400mm build volume. This allows you to print large models or multiple parts in one job. It is ideal for prototyping and batch production. The larger area reduces assembly steps for big projects.
You want faster printing speeds
This model supports up to 500mm/s printing speed and 10000mm/s² acceleration. Klipper firmware helps maintain stable quality at high speeds. You create models faster with less waiting time while enjoying efficient printing performance for your projects.
You prefer a compact desktop size
The standard LK10 features a smaller 8.86×8.86×10.4 inch build volume. It fits easily on smaller workspaces. It includes a 4.3-inch full-color touch screen and a 400W power supply. This setup suits users with limited desk space.
The products compared
Longer LK10 Plus High-Speed 3D Printer
Best for: Large format high-speed FDM printing
- Build Volume
- 320 × 320 × 400 mm
- Print Speed
- 500 mm/s
- Printing Technology
- FDM
- Leveling Type
- Auto Bed Leveling
- Extruder Type
- Dual-gear direct drive
- Target Audience
- Beginners
View on Amazon: Longer LK10 Plus High-Speed 3D Printer Affiliate link
The Longer LK10 Plus is a high-speed FDM 3D printer with a 320x320x400mm build volume. It uses Klipper firmware to reach speeds up to 500mm/s and 10000mm/s² acceleration. A dual-gear direct drive extruder handles various materials like TPU and Nylon. Auto bed leveling and dual Z-axis motors ensure stability. This model suits makers needing large prints and fast turnaround times.
Pros
- Large 320x320x400mm build volume for big parts
- Up to 500mm/s print speed with 10000mm/s² acceleration
- Dual-gear direct drive extruder for high flow
- Auto bed leveling with eddy current sensor
- Dual Z-axis design for smoother vertical movement
Cons
- Heavier and bulkier frame than standard desktop printers
- No mention of a built-in touchscreen display
- Direct drive extruder may struggle with very long filament runs
Good fit if
- You need to print large models in a single piece
- You prioritize fast print speeds for prototyping
- You require reliable auto-leveling for consistent first layers
Skip if
- You have limited desk space for a large footprint
- You primarily print small, detailed miniatures
- You prefer a compact, lightweight printer for portability
Verdict: The Longer LK10 Plus 320x320x400mm fits makers who need large build volumes and high-speed printing for engineering or batch production. It is a practical tool for those who value speed and stability over compact size.
Longer Direct Drive FDM 3D Printer
Best for: Compact high-flow printing with Klipper firmware
- Build Volume
- 8.86×8.86×10.4 in
- Printing Technology
- FDM
- Leveling Type
- Vortex Auto Leveling
- Extruder Type
- Direct drive high-flow
- Color
- Black
- Dimensions
- 8.86 × 8.86 × 10.4 inches
View on Amazon: Longer Direct Drive FDM 3D Printer Affiliate link
The Longer LK10 is a direct drive FDM 3D printer with an 8.86 x 8.86 x 10.4 inch build volume. It uses a Klipper mainboard with TMC2209 drivers for quiet, high-speed operation. The direct drive extruder features hardened steel gears and a bimetallic throat to prevent clogs. Vortex auto leveling simplifies setup. This model suits users who want reliable high-flow printing in a compact footprint.
Pros
- Direct drive high-flow extruder with hardened steel gears
- Klipper mainboard with TMC2209 silent drivers
- Vortex auto bed leveling and nozzle calibration
- Built-in filament runout detection sensor
Cons
- Smaller 8.86-inch build volume compared to the LK10 Plus
- Single Z-axis motor configuration
- No mention of mobile app control in specifications
Good fit if
- You need a direct drive extruder for flexible filaments
- You prefer Klipper firmware for faster printing speeds
- You want auto leveling to reduce manual calibration time
Skip if
- You require a larger 12-inch or bigger build volume
- You need dual Z-axis motors for enhanced stability
- You want a printer with built-in Wi-Fi app integration
Verdict: The Longer LK10 8.86" Direct Drive FDM Printer fits users who prioritize direct drive reliability and Klipper speed in a compact size. It is ideal for small to medium prints requiring high-flow capabilities.
Specifications side by side
| Spec | Longer LK10 Plus High-Speed 3D Printer | Longer Direct Drive FDM 3D Printer |
|---|---|---|
| Build Volume | 320 × 320 × 400 mm | 8.86×8.86×10.4 in |
| Print Speed | 500 mm/s | not stated |
| Printing Technology | FDM | FDM |
| Leveling Type | Auto Bed Leveling | Vortex Auto Leveling |
| Extruder Type | Dual-gear direct drive | Direct drive high-flow |
| Leveling | Auto Leveling | Auto Leveling |
| Target Audience | Beginners | not stated |
| Color | Grey | Black |
| Dimensions | 21.7 × 22.6 × 24.6 inches | 8.86 × 8.86 × 10.4 inches |
| Weight | not stated | 18.3 pounds |
| Size | 320mm×320mm | 8.86x8.86x10.4 in |
| Model | not stated | LK10 |
Frequently asked questions
Which printer is better for large engineering parts?
The Longer LK10 Plus is the better choice for large engineering parts. It features a 320x320x400mm build volume, which accommodates significantly larger single-piece prints than the standard model. This larger capacity makes it suitable for batch production and prototyping where size is a primary constraint.
Does the standard LK10 support direct drive extrusion?
Yes, the Longer Direct Drive FDM 3D Printer uses a direct drive extruder. This configuration ensures reliable high-flow printing capabilities. It is designed for users who prioritize extruder reliability and performance in a compact footprint, making it ideal for small to medium-sized prints.
What are the physical dimensions of the LK10 Plus?
The Longer LK10 Plus measures 22.6 inches in width, 24.6 inches in height, and 21.7 inches in length. These dimensions reflect its large format design. You should ensure your workspace can accommodate this larger footprint, as it is significantly bulkier than the compact LK10 model.
Is the standard LK10 printer compact?
Yes, the Longer Direct Drive FDM 3D Printer is designed for compact spaces. It measures 8.86 inches in width, 8.86 inches in length, and 10.4 inches in height. Weighing 18.3 pounds, it is a lightweight option suitable for users who need a smaller machine for desktop use.
Do both printers use Klipper firmware?
Both the Longer LK10 Plus and the standard Longer Direct Drive FDM 3D Printer utilize Klipper firmware. This shared feature ensures reliable performance and high-speed printing capabilities across both models. You can expect consistent control and efficiency regardless of which build volume you choose.
Which model is ideal for batch production?
The Longer LK10 Plus is ideal for batch production. Its 320x320x400mm build volume allows you to print multiple parts in a single job. This large area supports efficiency for makers who need to produce several components simultaneously, unlike the smaller standard model.