LANDU Silk PLA 1.75mm 1kg Review: Specs, Pros and Cons

What stands out

• Silk surface finish for a smooth, shiny appearance without polishing
• Dimensional accuracy of ±0.02 mm for consistent layer deposition
• 24-hour deep drying and vacuum packaging to minimize moisture
• Recommended print speed of 40-80 mm/s for optimal results
• Universal compatibility with most 1.75mm FFF 3D printers

Who it fits

Key specs explained

Filament Diameter: 1.75 mm

This is the standard thickness for most consumer FFF 3D printers. You can load this filament into almost any desktop machine without needing adapters or special extruders. It ensures smooth feeding through the hotend. If your printer uses 2.85 mm rods, this spool will not fit. This size is the industry norm for hobbyist and prosumer equipment.

Dimensional Accuracy: ±0.02 mm

This tolerance indicates how closely the actual diameter matches the target. A variance of only two hundredths of a millimeter prevents under-extrusion or clogs. It leads to consistent layer heights and better surface quality. You avoid gaps in your prints. This accuracy is crucial for detailed models. Check this spec when buying filament to ensure reliable extrusion flow.

Surface Finish: Silk

The filament produces a shiny, metallic-looking surface directly from the printer. You skip sanding or polishing steps to achieve a premium look. The silver color enhances this lustrous effect. It is ideal for decorative items, jewelry, or artistic displays. This finish differs from standard matte PLA. It adds visual depth to your prints without extra post-processing work.

Net Weight: 1 kg

This is the total mass of the plastic material on the spool. It equals approximately 2.2 pounds of filament. This amount suits small to medium projects. You can print several figurines or functional parts before needing a refill. It is lighter than 2 kg spools, making it easier to handle. Consider your project volume to decide if this quantity meets your needs.

Design and build overview

The listing describes this LANDU Silk PLA as a 1.75 mm filament with a silk finish. You get a smooth, shiny surface on your prints that requires no extra polishing. The material is standard PLA, which is known for being easy to use. The dimensional accuracy is listed at ±0.02 mm. This tight tolerance means the filament diameter stays consistent. Consistent diameter helps your printer feed the material smoothly. It reduces the chance of clogs or uneven layers. You can expect stable extrusion throughout your print job.

Each spool holds 1 kg of filament. The total weight is 2.2 pounds, including the cardboard spool. The spool itself weighs 0.3 pounds without the filament. The physical dimensions are 7.87 inches in height and width, with a width of 2.67 inches. The hub hole diameter is 2.13 inches. This size fits most standard 3D printers. The larger inner diameter reduces friction during feeding. The filament is mechanically wound to prevent tangling. This layout helps you load the spool without snags. The vacuum packaging keeps moisture out. This design choice helps maintain quality during storage. You can trust the material to print cleanly if you store it properly.

Setup and everyday use

Setting up this filament is straightforward. You load the 1.75 mm spool into your printer’s feeder. The spool features a large inner diameter, which reduces friction during feeding. This design minimizes the risk of tangling or snapping. The filament is mechanically wound and manually inspected to ensure neat arrangement. This consistency helps prevent jams in your extruder.

The listing states universal compatibility with most 1.75 mm FFF 3D printers and 3D printing pens. You should verify your machine’s spool dimensions. The spool diameter is 7.87 inches, the width is 2.67 inches, and the hub hole is 2.13 inches. These measurements fit standard holders on many desktop machines.

For daily use, you can set the nozzle temperature between 200°C and 220°C. The heated bed should be kept between 50°C and 60°C. The recommended printing speed ranges from 40 to 80 mm/s. This speed range allows for smooth extrusion without sacrificing the silk finish. The dimensional accuracy of ±0.02 mm ensures stable flow, reducing the need for frequent retraction adjustments.

The filament undergoes 24-hour deep drying and comes in vacuum packaging. This keeps moisture out, which prevents clogging and bubbling. You can store the spool for an extended period without quality degradation. The strong adhesion properties help models stick firmly to the print bed. This reduces the chance of deformation or peeling during long prints. You get consistent results for art, crafts, and general models.

Before you buy LANDU silk PLA

You should verify your printer’s hotend can reach 200 to 220°C, as this silk PLA requires that heat range. The spool dimensions are 7.87 inches in diameter and 2.67 inches wide. Ensure your filament holder accommodates this size without wobbling. The hub hole is 2.13 inches, which fits most standard spools. You will need a dry storage box after opening the vacuum seal to maintain the claimed bubble-free quality. This filament sits alongside other PLA options in 1 alternatives, offering a shiny finish without extra polishing. It is ideal for art and craft projects where visual appeal matters. Check your slicer settings for speeds between 40 and 80 mm/s. A heated bed set to 50–60°C helps with the strong adhesion mentioned in the listing. Keep spools in a cool, dry place to preserve the 24-hour deep drying benefits. This material suits users prioritizing aesthetics over high-speed production.

Check before you buy

• Verify your printer accepts 7.87 inch spool diameter
• Check hub hole size matches your 2.13 inch standard
• Ensure hotend reaches 200 to 220°C for proper flow
• Buy a dry box to maintain moisture-free filament quality
• Set heated bed to 50 to 60°C for adhesion

The product at a glance

1

LANDU Silk PLA 1.75mm 1kg Silver

Best for: shiny silk finish art and craft prints

Material Type

PLA

Filament Diameter

1.75 mm

Net Weight

1 kg

Max Print Speed

80 mm/s

Dimensional Accuracy

±0.02 mm

Surface Finish

Silk

View on Amazon: LANDU Silk PLA 1.75mm 1kg Silver Affiliate link

LANDU Silk PLA filament delivers a smooth, shiny finish that mimics real silk without extra polishing. With a 1.75 mm diameter and ±0.02 mm dimensional accuracy, it ensures stable feeding and consistent prints. The material features strong bed adhesion and undergoes 24-hour deep drying to prevent clogging. It is compatible with most 1.75 mm FFF printers and printing pens, making it a reliable option for detailed art and craft projects.

Pros

• Silk surface finish for a shiny, polished look
• ±0.02 mm dimensional accuracy for consistent extrusion
• Strong adhesion reduces lifting and deformation
• 24-hour deep drying minimizes moisture and bubbling

Cons

• Cardboard spool may not suit all automated printers
• Recommended speed capped at 80 mm/s
• No vacuum-sealed reusable bag mentioned for storage

Good fit if

• You want a shiny, silk-like aesthetic for display models
• You print detailed art and craft projects
• You use standard 1.75 mm FFF 3D printers

Skip if

• You require high-speed production printing over 80 mm/s
• You need a plastic spool for direct drive systems
• You prefer matte or textured surface finishes

Verdict: LANDU Silk PLA 1.75mm 1kg is a solid choice for hobbyists seeking a premium silk finish on standard 1.75 mm printers. It fits users prioritizing visual detail and reliable adhesion for art pieces over raw printing speed.

Specifications side by side

Frequently asked questions

See also

• landu silk pla 1 75mm 1kg alternatives
• best 3d printers under 200
• voigtlander voigtlander nokton 75mm f 1 5 review
• viltrox 75mm f 1 2 f1 2 pro review