Kingroon PA6-CF Carbon Fiber Nylon Alternatives: 6 Similar Picks Compared

How each alternative compares

iSANMATE 1.75mm Carbon Fiber ASA Filament

The iSANMATE ASA CF filament shifts material from Nylon 6 to ASA. This change improves outdoor weather and UV resistance, making it better for exterior functional parts. Like the Kingroon option, it offers tight dimensional accuracy of ±0.02mm. You lose the specific heat deflection properties of PA6, which tops out at 153°C. ASA is generally easier to print than Nylon but may not handle high-temperature engine bay components as well. Choose this if your parts face sunlight and rain. Keep the Kingroon PA6-CF if you need maximum structural rigidity and heat tolerance for indoor or under-hood applications where UV exposure is minimal.

TINMORRY PA6-CF Nylon Filament 1.75mm

TINMORRY PA6-CF is a direct competitor using the same Nylon 6 Carbon Fiber material. It matches the Kingroon filament in chemical resistance and high strength. The main difference is brand support and specific printing parameters. Both require dried filament and high bed temperatures to prevent warping. TINMORRY targets users who need identical mechanical properties but prefer a different supplier. If you already have the Kingroon settings, you can likely use these directly. Pick TINMORRY if you want a similar industrial-grade performance but need a different spool size or availability. Stick with Kingroon if you value its specific dual-laser inspection and established parameter sets for complex automotive parts.

ERYONE 1.75mm Carbon Fiber ASA Filament

ERYONE ASA CF replaces Nylon with ASA material. This offers superior outdoor durability and UV stability compared to PA6-CF. You gain better resistance to weathering for signage or exterior fixtures. However, you sacrifice the high heat deflection point of 153°C found in the Kingroon option. ASA is less rigid under heavy loads than Nylon Carbon Fiber. Choose ERYONE for outdoor functional parts that do not face high temperatures. Use the Kingroon PA6-CF for mechanical components, engine bays, or tools that must withstand heat and heavy stress. Both provide carbon fiber reinforcement for strength, but their environmental strengths differ significantly.

iSANGHU Carbon Fiber ASA 1.75mm Filament (1 kg)

iSANGHU Carbon Fiber ASA focuses on a matte finish and outdoor stability. Like other ASA options, it outperforms PA6-CF in UV resistance. The matte finish hides layer lines better for visible parts. You give up the high heat tolerance of 153°C and the specific toughness of Nylon 6. This filament is ideal for exterior functional pieces where appearance and weather resistance matter most. If you need parts for under-hood automotive use or industrial jigs, the Kingroon PA6-CF remains superior due to its thermal and mechanical ratings. Select iSANGHU for garden tools, outdoor fixtures, or decorative functional items that stay away from high heat sources.

YOOPAI Inslogic PA6-CF20 1.75mm Nylon Filament

YOOPAI Inslogic PA6-CF20 uses the same Nylon 6 Carbon Fiber base as the Kingroon filament. The key difference is the spool weight, which is 500g instead of 1kg. This smaller size suits users who need less material or want to test the filament before buying more. The mechanical properties, including heat resistance and strength, remain comparable to the Kingroon 1kg version. Choose this if you have limited storage or need a smaller batch for prototyping. Stick with the Kingroon option for larger production runs or when you need the full 1kg spool for extended projects. Both require similar drying and printing conditions for optimal results.

Inslogic 1.75mm PA6-CF Carbon Fiber Nylon 1kg

Inslogic PA6-CF 1kg is nearly identical to the Kingroon option in material and weight. Both use Nylon 6 Carbon Fiber in a 1kg spool. The primary distinction is brand-specific support and minor parameter variations. Mechanical properties like tensile strength and heat deflection are similar for functional automotive and industrial parts. Choose Inslogic if you prefer its specific brand ecosystem or availability. The Kingroon PA6-CF may offer more detailed printing parameters and dual-laser quality control data. Both are suitable for high-strength prototypes. If you need exact 153°C heat deflection and proven rigidity, either works, but Kingroon provides more specific engineering data for complex applications.

Quick picks

Our 7 picks

1 Best overall

Kingroon PA6-CF Carbon Fiber Nylon Filament 1.75mm

Best for: high-heat functional automotive and industrial parts

Material Type

PA6-CF

Filament Diameter

1.75mm

Net Weight

1kg

Dimensional Accuracy

±0.02mm

Compatible Material

Nylon

Features

Carbon Fiber

View on Amazon: Kingroon PA6-CF Carbon Fiber Nylon Filament 1.75mm Affiliate link

This Kingroon PA6-CF filament offers high strength and heat resistance for functional parts. It features a tensile strength of 76MPa and a heat deflection temperature of 153°C. The 1.75mm diameter has a tight tolerance of ±0.02mm to reduce clogs. You get a 1kg spool suitable for engineering and automotive applications. It requires a hardened steel nozzle and dry storage to prevent defects.

Pros

• Heat deflection temperature reaches 153°C for engine bay parts
• Tensile strength is 76MPa for rigid, load-bearing components
• Dimensional accuracy of ±0.02mm minimizes feeding issues
• Includes vacuum-sealed packaging with desiccant for moisture control

Cons

• Requires drying at 80°C for 8-12 hours before printing
• Maximum print speed is limited to 60mm/s
• Needs an enclosed printer and hardened steel nozzle

Good fit if

• You need high heat resistance for under-hood automotive parts
• You require strong, rigid jigs for industrial workshops
• You have a hardened steel nozzle for abrasive filaments

Skip if

• You want to print at speeds faster than 60mm/s
• You do not have an enclosed printer for temperature control
• You cannot dry the filament before use to avoid defects

Verdict: Kingroon PA6-CF 1kg Nylon delivers high rigidity and heat resistance for functional prototypes. It fits engineers who need durable, heat-tolerant parts for automotive or industrial use.

2 Best +/- 0.02mm

iSANMATE 1.75mm Carbon Fiber ASA Filament

Best for: outdoor functional parts requiring weather resistance

Material Type

Carbon Fiber ASA

Filament Diameter

1.75mm

Net Weight

1kg

Max Print Speed

100mm/s

Dimensional Accuracy

+/- 0.02mm

Application

Functional Parts

View on Amazon: iSANMATE 1.75mm Carbon Fiber ASA Filament Affiliate link

This iSANMATE ASA CF filament offers UV and weather resistance for outdoor parts. It has a 1.75mm diameter with +/- 0.02mm dimensional accuracy. The material supports print speeds up to 100mm/s. You need a closed environment and a hot bed between 80°C and 100°C. It comes in a 1kg spool with vacuum-sealed packaging. This option suits users needing tough, functional parts that withstand heat and rain.

Pros

• ASA CF material provides high UV and thermal resistance
• Dimensional accuracy of +/- 0.02mm ensures consistent prints
• Supports print speeds up to 100mm/s
• Vacuum-sealed packaging includes desiccant for moisture protection

Cons

• Requires a closed printer enclosure to prevent warping
• Higher printing temperature range of 240°C to 270°C
• No mention of included technical support beyond email reply

Good fit if

• You need parts that resist UV light and rain
• You have a closed-enclosure 3D printer
• You require high dimensional accuracy for functional components

Skip if

• You want to print without an enclosure
• You prefer lower printing temperatures for easier setup
• You need immediate phone support for troubleshooting

Verdict: iSANMATE ASA CF 1.75mm Filament fits users who need durable outdoor parts and have the equipment for high-temperature printing. It is a solid choice for functional models requiring weather resistance.

3 Also great

TINMORRY PA6-CF Nylon Filament 1.75mm

Best for: high-strength load-bearing structural parts

Material Type

PA6-CF

Filament Diameter

1.75mm

Net Weight

1 KG

Max Print Speed

<200 mm/s

Compatible Material

Nylon

Features

Carbon Fiber

View on Amazon: TINMORRY PA6-CF Nylon Filament 1.75mm Affiliate link

TINMORRY PA6-CF is a 1.75mm carbon fiber reinforced nylon filament designed for high-strength applications. It contains approximately 5% carbon fiber to boost stiffness and hardness. The material offers a thermal deformation temperature of up to 141°C, ensuring heat resistance for demanding parts. You need an enclosure and hardened steel nozzle for printing. It supports speeds under 200 mm/s and requires drying at 80°C for at least 8 hours before use.

Pros

• High stiffness and hardness from 5% carbon fiber content
• Thermal deformation temperature reaches 141°C
• Excellent toughness against mechanical stress
• Suitable for load-bearing structural components

Cons

• Requires an enclosed 3D printer for stable chamber temperature
• Needs hardened steel nozzle due to abrasive carbon fiber
• Strict drying requirement of 80°C for 8 hours

Good fit if

• You need high stiffness for load-bearing parts
• You have an enclosed printer with hardened nozzle
• You require heat resistance up to 141°C

Skip if

• You lack an enclosure for temperature stability
• You do not have a hardened steel nozzle
• You prefer high-speed printing over 200 mm/s

Verdict: TINMORRY PA6-CF 1kg Filament is a robust option for engineers printing structural parts that must withstand heat and stress. It fits users who already own the necessary enclosure and hardened nozzle setup for nylon processing.

4 Best budget

ERYONE 1.75mm Carbon Fiber ASA Filament

Best for: outdoor functional parts and signage

Material Type

ASA Carbon Fiber

Filament Diameter

1.75mm

Net Weight

1kg

Application

Functional Parts

Dimensions

8.66 × 8.27 × 2.87 inches

Weight

2.2 pounds

View on Amazon: ERYONE 1.75mm Carbon Fiber ASA Filament Affiliate link

This is ERYONE ASA Carbon Fiber filament, designed for functional parts that need to withstand outdoor conditions. It features 10% carbon fiber reinforcement for added strength and rigidity while keeping the print lightweight. The material resists heat, chemicals, and weather, making it suitable for signage or marine accessories. It comes in a 1kg spool with a 1.75mm diameter, dried and vacuum-sealed to prevent moisture issues.

Pros

• 10% carbon fiber reinforcement for high strength
• Resistant to heat, chemicals, and weather
• Vacuum-sealed packaging with desiccants
• 1.75mm diameter for standard printers

Cons

• Abrasive carbon fiber requires hardened steel nozzles
• Benefits from enclosed printers for stable temperatures
• Limited to ASA-based material properties

Good fit if

• You need durable parts for outdoor use
• You want resistance to UV and weather
• You are printing functional structural components

Skip if

• You only have brass nozzles
• You prefer low-temperature printing environments
• You need flexibility rather than rigidity

Verdict: ERYONE ASA CF 1.75mm Filament is a robust option for users printing functional parts that must endure outdoor exposure. It fits those who prioritize weather resistance and structural rigidity over ease of printing.

5 Best matte

iSANGHU Carbon Fiber ASA 1.75mm Filament (1 kg)

Best for: outdoor functional parts

Material Type

ASA-CF

Filament Diameter

1.75mm

Net Weight

1kg

Surface Finish

Matte

Features

Carbon Fiber

Application

Functional Parts

View on Amazon: iSANGHU Carbon Fiber ASA 1.75mm Filament (1 kg) Affiliate link

This iSANGHU filament blends ASA with 20% carbon fiber to create a tough, matte black material. It offers high UV, rain, and heat resistance, making it suitable for outdoor use. The 1.75mm diameter ensures compatibility with most printers. You get a 1kg spool of vacuum-sealed filament designed for functional parts that need to withstand weather and chemicals without fading.

Pros

• 20% carbon fiber reinforcement for high strength
• Matte black surface finish
• 10x weathering and UV resistance
• Resistant to alcohol and cleaning agents

Cons

• ASA material is prone to warping
• Requires dry storage to maintain performance
• No specific nozzle hardness rating listed

Good fit if

• You need parts for outdoor exposure
• You want a matte black finish
• You print functional prototypes

Skip if

• You require high gloss surfaces
• You lack an enclosed printer
• You need flexible materials

Verdict: iSANGHU Carbon Fiber ASA 1.75mm is a durable option for users who need weather-resistant functional parts. It suits those who prioritize UV stability and a non-reflective look over ease of printing.

6 Best 1.75mm

YOOPAI Inslogic PA6-CF20 1.75mm Nylon Filament

Best for: High-strength functional prototypes

Material Type

PA6-CF

Filament Diameter

1.75mm

Net Weight

0.5kg

Max Print Speed

100 mm/s

Compatible Material

Nylon

Features

Carbon Fiber

View on Amazon: YOOPAI Inslogic PA6-CF20 1.75mm Nylon Filament Affiliate link

This Inslogic PA6-CF filament uses 20% short carbon fiber to reinforce PA6 nylon. It offers metal-like strength and heat stability up to 209°C. The 1.75mm diameter ensures broad printer compatibility. You get a 0.5kg spool that is pre-dried and vacuum-sealed. It suits you if you need tough, lightweight functional parts that resist impact and warping.

Pros

• 20% carbon fiber reinforcement for high rigidity
• Heat resistance up to 209°C
• Pre-dried and vacuum-sealed for immediate use
• Compatible with major 3D printer brands

Cons

• 0.5kg spool is half the size of standard 1kg options
• Requires a hardened steel nozzle for printing
• Needs pre-drying at 80-110°C for optimal results

Good fit if

• You need lightweight parts with high impact resistance
• You print functional components that face heat stress
• You want a pre-dried filament that reduces prep time

Skip if

• You prefer standard 1kg spools for better value
• You do not have a hardened steel nozzle
• You want to print without any pre-drying steps

Verdict: Inslogic PA6-CF 1.75mm Black delivers robust, heat-resistant parts for engineers. It fits you well if you prioritize strength and print reliability over spool volume.

7 Best premium

Inslogic 1.75mm PA6-CF Carbon Fiber Nylon 1kg

Best for: high-strength functional parts

Material Type

PA6-CF

Filament Diameter

1.75mm

Net Weight

1KG

Dimensional Accuracy

±0.03 mm

Compatible Material

Nylon

Features

Carbon Fiber

View on Amazon: Inslogic 1.75mm PA6-CF Carbon Fiber Nylon 1kg Affiliate link

This Inslogic PA6-CF filament is a 1.75mm carbon fiber reinforced nylon designed for high-strength functional parts. It offers 20% short fiber reinforcement for lightweight durability and resists heat up to 209°C. The 1kg spool is vacuum-sealed to prevent moisture damage. It suits users needing rigid components like gears or automotive parts that require impact resistance and dimensional stability.

Pros

• 1kg net weight spool size
• 20% carbon fiber reinforcement for strength
• Heat resistance up to 209°C
• Vacuum-sealed for moisture protection
• Detachable reusable spool design

Cons

• Heavier shipping weight at 2.2 pounds
• Limited to black color option
• No specific print temperature range listed

Good fit if

• You need heavy-duty functional parts
• You require high heat resistance
• You prefer larger 1kg spools

Skip if

• You need multi-color prints
• You require precise temp guidelines
• You want lighter shipping costs

Verdict: Inslogic PA6-CF 1kg Black Filament delivers robust strength and heat tolerance for demanding applications. It is the right pick for makers building durable mechanical components or automotive parts that must withstand high temperatures and impact.

Specifications side by side

Frequently asked questions

See also

• taco 0011 cf usk on command 1 8 alternatives
• ryobi 1 alternatives