Entina 4 Colors PLA 3D Printer Review (2026): A Spec-Based Look

What stands out

• Four-color PLA filament in a single 200g spool
• Dimensional accuracy of +/- 0.02mm for consistent feeding
• Vacuum-sealed packaging keeps filament dry for long-term storage
• Compatible with 99% of FDM 3D printers and 3D pens
• Recommended extrusion temperature between 190°C and 210°C

Who it fits

Entina Filament Key Specs

Filament Diameter: 1.75mm

This is the standard width for most desktop FDM printers. You need this exact size to fit your extruder gear. If the diameter varies, your printer may jam or under-extrude. This measurement ensures the filament feeds smoothly through the tube and into the hotend without catching on internal components.

Dimensional Accuracy: +/- 0.02mm

This tolerance tells you how much the actual thickness can deviate from the stated 1.75mm. A range of plus or minus two hundredths of a millimeter is tight. It means your printer will feed consistent volumes of plastic. This consistency prevents gaps in your prints and reduces the need for frequent flow rate adjustments.

Material Type: PLA

Polylactic acid is a bioplastic derived from renewable resources like corn starch. It melts at lower temperatures than ABS or PETG. This makes it easier to print with and less likely to warp. You get strong, rigid parts that are ideal for prototypes, models, and decorative items rather than high-heat functional components.

Net Weight: 200g

Each spool contains two hundred grams of filament. This is a smaller quantity than the standard one-kilogram roll. You should use this for testing new colors or small projects. It allows you to try different hues without committing to a large volume. Keep the vacuum seal intact to prevent moisture absorption during storage.

Design and Build Quality

According to the listing, this filament is made from PLA, a material derived from corn. This biological origin provides high purity and low shrinkage. You benefit from superb layer bonding, which is critical for functional parts. The material offers higher toughness, meaning your printed objects are less likely to snap under stress. This composition ensures the filament melts well and evenly, reducing the risk of nozzle clogs or extruder jams during operation.

The physical dimensions are precise. The diameter is 1.75mm with a tolerance of plus or minus 0.02mm. This tight control ensures consistent feeding through your printer’s extruder. You avoid unexpected interruptions caused by uneven filament thickness. Each spool weighs 200 grams, or 0.44 pounds. The compact weight makes it easy to handle and store. The filament is vacuum-sealed to keep moisture out, preserving its performance over time.

The design includes four distinct colors in one pack: bright green, orange, sapphire blue, and pink. This layout allows for multi-color prints without swapping spools. The packaging is simple, focusing on protection rather than aesthetics. You do not need complex controls for this product. It is ready to load directly into your printer. The straightforward design suits beginners who want reliable results without troubleshooting material issues. The vacuum seal ensures the filament remains dry until you open it.

Setup And Daily Use Guide

Setting up this filament is straightforward. You load the 1.75mm spool into your extruder. The tight dimensional accuracy of +/- 0.02mm ensures consistent feeding. This precision reduces the risk of unexpected interruptions. You do not need to worry about entanglement or jams during the initial load. The vacuum-sealed packaging keeps the material dry. This preservation maintains performance over time. You can store the spool without immediate drying if you use it soon. For daily use, you adjust your printer settings based on the recommended ranges. The listing suggests an extrusion or nozzle temperature between 190°C and 210°C. This range allows the PLA to melt evenly. You also set the bed temperature between 0°C and 50°C. The material shapes well with no bubble formation. You get clean prints without warping. This consistency helps you spend less time troubleshooting. The filament works with 99% of FDM 3D printers and 3D pens. It is compatible with Entina devices and other brands. You can print functional parts that require higher toughness. The four-color design simplifies multi-color projects. You do not need complex hardware modifications. Just load the spool and start printing. The low shrinkage and high purity ensure reliable results. You benefit from superb layer bonding in every print. This makes the filament suitable for both beginners and experienced users. The 200g net weight provides enough material for small to medium projects. You can finish your designs efficiently with this reliable supply.

Before You Buy This Filament

You need a compatible printer to use this product. It works with most FDM systems and pens, but you must verify your machine accepts 1.75mm filament. Check your extruder gears to ensure they grip the standard diameter without slipping. You should also confirm your nozzle size matches the filament width. Clogging is less likely with this precision, but hotends smaller than 0.4mm may struggle with the four-color blend. Keep the vacuum-sealed bags closed when not in use. The listing states each spool is dried for 24 hours before packaging. Moisture ruins PLA quality. Store your spools in a dry area or use a dry box. This filament suits beginners who want simpler multi-color prints. It avoids the complexity of dual-extruder setups. If you already own a multi-extruder printer, you might prefer standard single-color spools for better control. This option fits well alongside other tools in your workspace if you value ease of use. It reduces troubleshooting time, letting you focus on design. Ensure your bed adhesion settings are correct for PLA. A heated bed set between 0°C and 50°C is recommended. This helps prevent warping during the print cycle.

Check before you buy

• Verify your printer accepts 1.75mm filament diameter.
• Check if your extruder gears grip standard sizes.
• Confirm nozzle size is at least 0.4mm.
• Ensure you have a dry storage solution.
• Set bed temperature between 0°C and 50°C.

The product at a glance

1

Entina 4-Color PLA Filament 1.75mm

Best for: Beginner multi-color FDM printing

Material Type

PLA

Filament Diameter

1.75mm

Net Weight

200g

Dimensional Accuracy

+/- 0.02mm

Weight

7.05 ounces

View on Amazon: Entina 4-Color PLA Filament 1.75mm Affiliate link

This Entina 4-in-1 PLA filament offers four colors in a single 1.75mm spool. It features a dimensional accuracy of +/- 0.02mm for consistent feeding. The material is vacuum-sealed and dried to prevent warping or jamming. It works with most FDM printers and pens. You get 200g of material per spool. This setup simplifies multi-color printing without needing multiple extruders.

Pros

• 4-in-1 design combines four colors in one spool
• High precision diameter tolerance of +/- 0.02mm
• Vacuum-sealed packaging keeps filament dry
• Compatible with 99% of FDM 3D printers

Cons

• Small 200g net weight per spool
• Limited to PLA material only
• Requires specific temperature settings for optimal results

Good fit if

• You want to try multi-color prints without complex hardware
• You need a reliable filament for beginner projects
• You prefer vacuum-sealed packaging for storage

Skip if

• You require large 1kg spools for long runs
• You print with ABS or PETG materials
• You need continuous filament for industrial production

Verdict: Entina 4-Color PLA Filament is a practical option for beginners exploring multi-color printing. It fits users who value ease of use and reliable feeding over high-volume output.

Specifications side by side

Frequently asked questions

See also

• entina 4 colors pla 3d printer alternatives
• best 3d printers under 200
• entina tina2c mini 3d printer review
• xerox c310dni color printer review