ELEGOO Mercury X Dual Wash Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This elegoo mercury x dual wash review covers the ELEGOO Mercury X Bundle, a post-processing station designed for resin 3D printing. It combines a washing machine and a post-curing unit in one package. The washing section features a 7.5-liter container capable of handling large prints from Saturn or Mars 3 printers. The curing section uses two light bars with 14 LEDs each, plus four LEDs under the turntable. These emit a 405nm wavelength through a Fresnel lens to optimize print quality. The unit measures 11 by 12 by 18 inches and uses a single knob for control.
What stands out
- 7.5-liter washing container for large parts
- Two light bars with 14 LEDs each
- 405nm UV wavelength for curing
- Single knob operation for time settings
- UV cover blocks 99.9% of rays
Who it fits
Good fit for
You should buy this if you print large resin models and want to wash and cure simultaneously. The 7.5-liter bucket fits prints directly on the build plate, which saves time. The dual function maximizes throughput for busy makers. It suits users who print with standard UV-curable resins. The single-knob interface is practical for quick adjustments. If you have space for a 11x12x18 inch unit, this bundle streamlines your post-processing workflow efficiently.
Who should skip it
Skip this if you use water-washable resin. The data notes that running water is better for those materials, and the washing machine is not suitable for them. You should also avoid this if you need separate washing and curing cycles without mixing solvents. The machine requires liquid in the bucket beforehand to prevent wheel damage. If you want a smaller footprint or a different control method than a single knob, look elsewhere.
Verdict: The ELEGOO Mercury X Bundle offers a practical way to wash and cure large resin prints at the same time. Its large container and focused UV curing make it a solid choice for resin printers who value throughput.
ELEGOO Mercury X Key Specs
7.5 Liters container
This volume allows you to wash large models directly on the build plate. You can hang big parts from the Saturn or Mars 3 inside the bucket without removing them. This saves time and reduces handling errors. Compare this capacity to smaller units if you frequently print large resin objects. It ensures the solvent fully covers complex geometries during the agitation cycle.
14 LED lights each
The curing unit uses two light bars with this many LEDs. They emit the optimal 405nm wavelength for resin hardening. This setup works with a Fresnel lens to ensure even exposure. It helps improve print quality by fully curing surfaces. Check this against units with fewer lights to avoid under-cured spots on detailed prints.
UV cover blocks 99.9% of ultraviolet rays
This feature protects your eyesight during the post-curing process. You can operate the machine safely without special eyewear. The cover shields you from harmful UV exposure while the unit runs. This is a critical safety spec for any curing station. Compare this rating to open-frame units that may require additional protective gear.
11 inches width, 18 inches height, 12 inches length
These dimensions define the footprint and vertical space required on your workbench. The medium size fits most standard desks but requires careful planning. Ensure you have clearance above the unit for opening the lid. Compare these measurements to your available workspace before purchasing. This helps you avoid buying a unit that is too bulky for your setup.
Design and Build Analysis
According to the listing, the ELEGOO Mercury X Bundle measures 11 inches wide, 12 inches long, and 18 inches tall. These dimensions define it as a medium-sized unit. You need sufficient counter space to accommodate this footprint. The design integrates two distinct machines: a washer and a curing station. This dual setup allows you to process prints sequentially without moving parts between separate devices. The washing section includes a 7.5-liter container. This volume supports large models printed on Saturn or Mars 3 build plates. You can hang parts directly in the bucket. This layout reduces handling and potential damage to delicate resin structures.
The curing unit features a sleek exterior controlled by a single knob. You press and hold to power the device, then rotate the knob to set the time. This interface simplifies operation. The listing notes a UV cover that blocks 99.9% of ultraviolet rays. This feature protects your eyesight during the post-curing phase. The unit uses Fresnel lenses to direct 405nm wavelength light. This optical choice ensures optimal curing for resin prints. The bundle is available in a specific color and style option labeled Mercury X Bundle-M. You should verify the exact color matches your workspace aesthetic. The build focuses on functional post-processing rather than decorative appeal. The materials support repeated use with solvents and UV exposure. This construction suits a dedicated resin printing workflow. You benefit from a streamlined process that handles washing and curing in one compact station. The design prioritizes safety and throughput for larger prints.
Setup And Daily Operation Guide
Setting up the ELEGOO Mercury X Bundle begins with placing the unit on a stable surface. The listing notes that the washing machine requires liquid in the bucket before operation. You must add solvent in advance to prevent the internal wheel from getting stuck. This is a critical step for safe daily use. The system is compatible with resin 3D printers like the Saturn and Mars 3. It supports models printed on build plates that fit inside the 7.5-liter container. You can hang large parts directly from the hanger inside the bucket. This allows you to wash prints without removing them from the plate, which reduces handling errors. Daily operation relies on a single control knob. You press and hold the knob to turn the machine on or off. Then, you rotate the knob to set the desired time for washing or curing. The curing unit includes a UV cover that blocks 99.9% of ultraviolet rays. This protects your eyesight while the unit runs. The post-curing section uses Fresnel lenses and LED lights to emit the optimal 405nm wavelength. This helps improve print quality by ensuring consistent exposure. For best results, the listing suggests drying washed models before placing them in the curing station. Note that water-washable resins are not suitable for the washing machine and should be cleaned with running water instead. This workflow allows you to wash and cure prints simultaneously, maximizing your throughput.
Before You Buy This Bundle
You need to verify compatibility before purchasing this bundle. The listing states it works with Saturn and Mars 3 printers. Check your specific printer model to ensure the build plate fits the hanger system. You must also have a compatible UV-curable resin. This station handles post-processing only. It does not print. You will need additional supplies like isopropyl alcohol or specialized washing solvents. The guide warns that water-washable resins should not be cleaned in this machine. You should use running water for those instead. Upkeep involves cleaning the bucket and ensuring the UV cover seals properly to block rays. This unit fits well if you print large models often. It saves space by combining wash and cure steps. Compare it against single-function stations. This bundle offers throughput for serious resin users who need to process multiple large parts efficiently without moving them between separate devices.
Check before you buy
- Verify your printer model is Saturn or Mars 3.
- Ensure you have UV-curable resin, not water-washable types.
- Check if your build plate fits the internal hanger.
- Confirm you have space for the 11x12x18 inch unit.
- Buy compatible washing solvents and safety gloves separately.
The product at a glance
ELEGOO Mercury X Dual Wash and Cure Station
Best for: Large resin prints and simultaneous processing
- Printing Technology
- Resin
- Dimensions
- 19 × 12 × 13 inches
View on Amazon: ELEGOO Mercury X Dual Wash and Cure Station Affiliate link
The ELEGOO Mercury X Bundle combines a washing station and a post-curing unit to streamline resin 3D printing workflows. It features a 7.5-liter washing container that accommodates large prints from Saturn and Mars 3 printers. The curing module uses two 14-LED light bars and four under-table LEDs with a Fresnel lens to emit optimal 405nm UV light. Its single-knob interface simplifies operation, while a UV cover blocks 99.9% of ultraviolet rays for safety.
Pros
- 7.5-liter washing container handles large prints on the build plate
- Dual curing light bars provide 28 LEDs plus 4 under-table LEDs
- Fresnel lens ensures optimal 405nm wavelength for print quality
- UV cover blocks 99.9% of ultraviolet rays for eye safety
- Single-knob control simplifies time setting for both machines
Cons
- Requires manual liquid addition to the washing bucket before use
- Not suitable for cleaning water-washable resin parts
- Requires drying prints before placing them in the curing unit
Good fit if
- You print large models on Saturn or Mars 3 printers
- You want to wash and cure prints simultaneously to save time
- You prefer simple mechanical controls over digital interfaces
Skip if
- You primarily use water-washable resin
- You need automatic liquid management for the washing stage
- You require digital displays or app connectivity for monitoring
Verdict: The ELEGOO Mercury X Bundle offers a practical solution for resin printers who need to handle large parts and maximize throughput. It fits users who value safety features and straightforward mechanical operation over automated digital controls.
Specifications side by side
| Spec | ELEGOO Mercury X Dual Wash and Cure Station |
|---|---|
| Printing Technology | Resin |
| Dimensions | 19 × 12 × 13 inches |
| Size | Medium-Mercury X Bundle |
| Color | Mercury X Bundle |
| Model | Mercury X Bundle |
Frequently asked questions
What is the ELEGOO Mercury X Dual Wash bundle designed for?
It is designed for large resin prints and simultaneous processing. The unit combines washing and curing in one station. This setup helps you maximize throughput. It fits users who value safety features and straightforward mechanical operation over automated digital controls.
How large is the ELEGOO Mercury X washing container?
The washing container holds 7.5 liters. This volume allows you to wash large models directly on the build plate. You can hang big parts from the Saturn or Mars 3 inside the bucket without removing them. This saves time and reduces handling errors.
What are the physical dimensions of the Mercury X bundle?
The unit measures 11 inches wide, 12 inches long, and 18 inches tall. These dimensions define it as a medium-sized unit. You need sufficient counter space to accommodate this footprint. The design integrates two distinct functions into a single compact frame.
Which 3D printers are compatible with the Mercury X bundle?
The listing states it works with Saturn and Mars 3 printers. You must verify compatibility before purchasing. Check your specific printer model to ensure the build plate fits the hanger system. This ensures the large parts can hang correctly inside the 7.5-liter container.
What printing technology does the ELEGOO Mercury X support?
It supports resin printing technology. The unit is a post-processing station for resin 3D printing. It handles UV-curable resin parts. You must have compatible resin to use this station effectively for washing and curing your printed objects.
Is the Mercury X bundle suitable for handling large parts?
Yes, it is best for large resin prints. The 7.5-liter container can handle large models directly on the build plate. You can hang big parts from the Saturn or Mars 3 inside the bucket. This allows for simultaneous processing without removing parts from the plate.