ELEGOO Mercury Plus V3.0 Wash Review (2026): A Spec-Based Look

What stands out

• 7.5L cleaning capacity for larger models
• 24 pcs of 405 nm UV lights for 360° curing
• Anti-UV cover blocks 99.9% of ultraviolet rays
• Intuitive touch panel with 30-minute max timer
• Upgraded POM bearing for smoother rotation

Who it fits

ELEGOO Mercury Plus V3 Key Specs

Cleaning capacity: 7.5L

This volume is 2.1 times larger than the previous V2.0 model. You can wash larger models or multiple prints in a single cycle. This reduces the need to stop and reload the tank. It is ideal for users who print frequently or make large objects. Compare this to smaller units that hold less than four liters.

Curing size expanded by 5.6 times

The internal curing area is significantly larger than older versions. You can fit bigger prints under the UV lights without resizing your models. This expansion allows for better workflow efficiency. It ensures that larger parts receive adequate light exposure. Check the internal dimensions of other stations to see if they match this scale.

24 pcs of 405 nm UV lights

These specific wavelength lights are standard for curing resin prints. Having twenty-four sources ensures even coverage across the turntable. This setup helps capture intricate details without blind spots. The single LED beneath the turntable aids bottom-up curing. Compare this count to cheaper units that may use fewer lights.

Dimensions: 17 x 15 x 24 inches

This medium size requires a dedicated workspace on your desk. The footprint is wider than compact models but offers more capacity. Ensure you have enough room for the turntable to rotate freely. The height allows for taller prints during the wash cycle. Measure your available surface area before purchasing to ensure a proper fit.

Weight: 13.9 pounds

This weight provides stability during high-speed rotation and agitation. It reduces vibration while washing models in the solvent bath. The unit is heavy enough to stay put but manageable for moving. Consider this when planning your printer station layout. Lighter units may shake more during the cleaning process.

ELEGOO Mercury Plus V3 Design Specs

The listing describes the ELEGOO Mercury Plus V3.0 as a medium-sized unit with dimensions of 17 inches wide, 24 inches long, and 15 inches high. It weighs 13.9 pounds. This footprint requires a dedicated spot on your workbench. You need enough clearance for the 7.5L tank and the curing area. The larger volume allows you to process multiple prints or larger models at once. This design choice reduces the frequency of stopping your workflow to reload or unload the station. The physical layout prioritizes capacity over compactness, which suits users with ample bench space.

Controls are managed via an intuitive touch panel. You can set wash and cure durations up to 30 minutes. The interface lets you track settings and remaining time easily. This direct control gives you flexibility to tailor cycles to specific resin types or model sizes. The unit includes an anti-UV protection cover that blocks 99.9% of ultraviolet rays. A micro switch stops curing when the cover is removed. This safety feature protects your eyes during operation. The listing notes compatibility with most LCD, DLP, and SLA printers. This broad support ensures the station fits into existing post-processing workflows without requiring specific brand accessories. The finish and build focus on durability and safety for daily use.

Setup and Daily Use Guide

The ELEGOO Mercury Plus V3.0 requires a stable surface due to its 17 by 24 inch footprint and 13.9 pound weight. You place the unit on your workbench and connect the power. The listing notes compatibility with most LCD, DLP, and SLA 3D printers, so you do not need special adapters for standard resin workflows. Setup is straightforward because the machine operates as a standalone post-processing station. You simply fill the 7.5L tank with cleaning solvent. The control interface is a touch panel. You use this panel to set wash and cure durations. The maximum time for each process is 30 minutes. This allows you to tailor cycles to specific print sizes. During washing, the upgraded POM bearing ensures smooth rotation. This mechanical detail supports efficient agitation of the solvent. You place your printed models inside the tank. The system cleans residual resin from the surfaces. Once washing is complete, you transfer the parts to the curing stage. The curing area features a 360-degree rotating turntable. It uses 24 UV lights at 405 nm. A single LED beneath the turntable adds top-down light. This configuration aims to eliminate blind spots during curing. You place the cover on the unit. The anti-UV protection blocks 99.9 percent of ultraviolet rays. A micro switch stops the process if you remove the cover. This safety feature prevents accidental exposure. You monitor the remaining time on the display. The larger capacity lets you process multiple prints at once. This reduces the frequency of loading and unloading. The design supports continuous daily use for resin printing tasks.

Before You Buy Mercury Plus V3.0

Before you add the ELEGOO Mercury Plus V3.0 to your workflow, verify your printer compatibility. The listing states it works with most LCD, DLP, and SLA machines, but you must confirm your specific model fits the 7.5L tank. Ensure your prints are small enough to rotate freely inside without hitting the walls. You will also need compatible isopropyl alcohol or a resin-safe cleaning solution. The unit requires a stable, level surface due to its 13.9-pound weight and 17 by 24-inch footprint. Consider your bench space carefully, as this medium-sized unit needs a dedicated spot. This station complements the V2.0 and XS bundles by offering higher capacity. If you print large models frequently, the expanded curing area and faster wash cycles provide significant time savings. Check that your workspace has adequate ventilation for resin fumes during the wash and cure processes.

Check before you buy

• Confirm your 3D printer model is compatible with this station.
• Ensure your prints fit inside the 7.5L cleaning tank.
• Verify you have a stable, level surface for the unit.
• Check that your workspace has proper ventilation for resin.

The product at a glance

1

ELEGOO Mercury Plus V3.0 Wash and Cure Station

Best for: Large model washing and curing

Printing Technology

DLP

Dimensions

24 × 17 × 15 inches

Weight

13.9 pounds

View on Amazon: ELEGOO Mercury Plus V3.0 Wash and Cure Station Affiliate link

The ELEGOO Mercury Plus V3.0 is a wash and cure station with a 7.5L cleaning capacity and 360-degree curing. It features 24 UV lights and a POM bearing for smooth rotation. The unit measures 17 by 24 inches and weighs 13.9 pounds. It includes a touch panel for up to 30-minute cycles and an anti-UV cover. This model suits users needing larger capacity for bigger prints or multiple models.

Pros

• 7.5L cleaning capacity for larger models
• 24 UV lights for 360-degree curing
• Anti-UV cover blocks 99.9% of rays
• Touch panel for easy time setting

Cons

• 13.9-pound weight requires stable surface
• 17 by 24-inch footprint needs space
• No app control for remote operation

Good fit if

• You print large models frequently
• You want thorough resin removal
• You need UV protection during curing

Skip if

• You have limited counter space
• You prefer lightweight portable units
• You need remote app control

Verdict: ELEGOO Mercury Plus V3.0 Wash Station offers high capacity and thorough curing for users with space. It fits those prioritizing print size over portability.

Specifications side by side

Frequently asked questions

See also

• elegoo mercury plus v3 0 wash alternatives
• best ELEGOO resin 3d printers
• creality ender 3 v3 plus review
• shelly plus 1pm review