6 Best Alternatives to the ELEGOO Centauri 2 Combo Multi-Color 3D Printer (2026)

How alternatives compare to Centauri

SPARKX i7 Multi-Color 3D Printer

The SPARKX i7 Color Combo is a smaller, lighter alternative at 27.6 pounds compared to the Centauri’s 33.1 pounds. It shares the beginner-friendly focus and multi-color capability but uses a direct drive extruder and auto leveling. The i7 includes a built-in camera and Wi-Fi for remote monitoring, features not explicitly listed for the Centauri. While the Centauri emphasizes high-speed CoreXY motion up to 500 mm/s, the i7 prioritizes ease of use and flexible material support. Its compact footprint makes it suitable for tighter spaces. You should choose the i7 if you value remote monitoring and a lighter machine over maximum print speed or larger build volumes.

Bambu Lab P1S Combo Multicolor 3D Printer

The Bambu Lab P1S Combo is heavier at 40.9 pounds and slightly smaller in width than the Centauri. It targets users who need robust performance with engineering materials alongside multi-color printing. Both printers offer automated leveling and multi-color workflows. The P1S Combo is designed for makers who prioritize reliability and advanced material compatibility over the Centauri’s specific beginner-focused ecosystem. The Centauri highlights a 5-inch touchscreen and smart pre-print checks, while the P1S focuses on speed and engineering-grade output. If you print with technical filaments and want a proven multi-color system, the P1S is a strong choice. You give up the Centauri’s specific beginner tools for greater material versatility.

Snapmaker U1 4-Toolhead 3D Printer

The Snapmaker U1 4-Toolhead is significantly heavier at 59.1 pounds and wider than the Centauri. It offers multi-material versatility with four toolheads, allowing for complex multi-color prints without manual swaps. The Centauri uses a 4-color CANVAS system with independent motors. The U1 prioritizes speed and multi-material flexibility for makers who need to switch between different material types, not just colors. It lacks the specific beginner-oriented features like the Centauri’s smart pre-print checks and magnetic printhead cover. You should pick the U1 if you value high-speed multi-material printing and do not mind a larger, heavier footprint. It is less ideal for beginners seeking simple, vibrant color transitions.

Bambu Lab A1 Mini Combo Multi-Color 3D Printer

The Bambu Lab A1 Mini Combo is much lighter at 22 pounds and more compact than the Centauri. It offers multi-color printing with full-auto calibration and high acceleration, similar to the Centauri’s speed focus. The A1 Mini is designed for beginners who want vibrant results without technical hassle. It lacks the Centauri’s 5-inch touchscreen and specific maintenance features like the semi-automatic belt tensioner. The A1 Mini’s smaller build volume makes it suitable for small, detailed prints. You should choose the A1 Mini if you need a quiet, compact machine for home use. It trades the Centauri’s larger workspace and specific beginner ecosystem for portability and ease of setup.

Entina Tina2C Mini 3D Printer

The Entina Tina2C Mini is a compact, entry-level option focused on PLA printing. It is significantly smaller and lighter than the Centauri, with a footprint of 8.6 by 8.6 inches. It features auto leveling and Wi-Fi, appealing to beginners and kids. Unlike the Centauri’s 4-color multi-color system, the Tina2C is designed for small-scale PLA projects. It is fully assembled, reducing setup time. You should pick the Tina2C if you need a simple, affordable printer for small PLA items. It gives up multi-color capability and high-speed performance for ease of use and a tiny footprint. It is not suitable for complex multi-color models or large prints.

FLASHFORGE High-Speed Multi-Color 3D Printer

The Flashforge AD5X offers a higher print speed of 600 mm/s compared to the Centauri’s 500 mm/s. It uses a CoreXY structure and direct drive extruder, similar to the Centauri. The AD5X is smaller and lighter at 24.3 pounds. It features auto leveling and is designed for fast multi-color prints on small models. The Centauri includes more smart features like RFID filament recognition and 22 intelligent sensors. You should choose the AD5X if you prioritize raw speed and a compact design for small, detailed multi-color prints. It lacks the Centauri’s extensive sensor array and beginner-focused workflow tools. It is ideal for users who want rapid output without the larger build volume of the Centauri.

Quick picks

Our 7 picks

1 Best overall

ELEGOO Centauri 2 Combo Multi-Color 3D Printer

Best for: Beginners wanting reliable multi-color prints

Print Speed

500mm/s

Multicolor Capacity

4-color

Leveling Type

Auto Leveling

Motion Structure

CoreXY

Color Printing

Multi-Color

Features

High Speed

View on Amazon: ELEGOO Centauri 2 Combo Multi-Color 3D Printer Affiliate link

The ELEGOO Centauri 2 Combo is a beginner-friendly multi-color 3D printer featuring a CoreXY motion system. It supports 4-color printing with instant switching and reaches speeds up to 500 mm/s. The unit includes a 5-inch touchscreen, auto calibration, and 22 intelligent sensors for consistent results. It measures 18.9 by 19.7 by 23.2 inches and weighs 33.1 pounds. This model suits users who want vibrant prints with minimal manual setup.

Pros

• 4-color printing with instant switching
• CoreXY system reaches 500 mm/s
• 22 intelligent sensors for real-time monitoring
• Full auto calibration simplifies setup

Cons

• Lower max speed than 600 mm/s competitors
• Only 4-color capacity vs 6-color options
• Heavier build at 33.1 pounds

Good fit if

• You want multi-color prints without complex setup
• You value high speed and smooth motion
• You prefer a large touchscreen interface

Skip if

• You need more than 4 colors
• You require speeds above 500 mm/s
• You prefer a lighter, more compact machine

Verdict: The ELEGOO Centauri 2 Combo offers a balanced mix of speed and color capability for beginners. It fits users who prioritize ease of use and vibrant multi-color output over maximum speed or higher color counts.

2 Best built-in camera

SPARKX i7 Multi-Color 3D Printer

Best for: beginners wanting multi-color printing

Build Volume

260×260×255mm

Leveling Type

Auto Leveling

Extruder Type

Direct drive extruder

Color Printing

Multi-Color

Features

Built-in Camera, Wi-Fi

Target Audience

Beginners

View on Amazon: SPARKX i7 Multi-Color 3D Printer Affiliate link

The Creality SPARKX i7 Combo is a multi-color 3D printer designed for beginners. It features a 260×260×255mm build volume and direct drive extruder. Auto leveling ensures consistent first layers without manual adjustment. The unit includes an AI camera for remote monitoring and print failure detection. You get automatic filament feeding for seamless color switching. This model weighs 27.6 pounds and measures 17.9 inches wide.

Pros

• Auto leveling for consistent adhesion
• Built-in AI camera with remote control
• Direct drive extruder supports TPU
• 5-second quick-swap hotend
• Automatic filament feeding system

Cons

• Smaller build volume than competitors
• Heavier build than competitors
• No mention of mobile app support

Good fit if

• You want multi-color printing with minimal setup
• You need remote monitoring via built-in camera
• You prefer direct drive extrusion for flexible materials

Skip if

• You require a large build volume over 260mm
• You need a lightweight portable unit
• You require a dedicated mobile app for control

Verdict: Creality SPARKX i7 Combo offers reliable multi-color printing with auto leveling and remote monitoring. It suits beginners who value ease of use and flexible material support over large build volumes.

3 Also great

Bambu Lab P1S Combo Multicolor 3D Printer

Best for: Multi-color prints with advanced materials

Print Speed

500mm/s

Multicolor Capacity

Up to 16 Colors

Leveling Type

Auto Bed Leveling

Motion Structure

CoreXY

Color Printing

Multi-Color

Features

High Speed

View on Amazon: Bambu Lab P1S Combo Multicolor 3D Printer Affiliate link

The Bambu Lab P1S Combo offers multi-color printing with up to 16 colors using the included AMS. It features a print speed of 500mm/s and acceleration of 20,000 mm/s². The enclosed design supports advanced filaments like ABS and ASA. You get automatic bed leveling for consistent results. This machine suits users who want high-speed, multi-material output in a compact, fully enclosed build.

Pros

• Prints up to 16 colors with AMS
• High speed of 500mm/s
• Enclosed design for advanced materials
• Automatic bed leveling

Cons

• Not recommended for carbon or glass fiber reinforced polymers
• Heavier build at 40.9 pounds
• Larger footprint than mini printers

Good fit if

• You want vibrant multi-color prints
• You print with advanced filaments like ABS
• You value fast print speeds

Skip if

• You need to print with carbon fiber
• You have very limited desk space
• You prefer open-frame printers

Verdict: Bambu Lab P1S Combo 3D Printer is a robust choice for makers who need speed and multi-color capability. It fits users who print with engineering materials and want reliable, automated leveling.

4 Best premium

Snapmaker U1 4-Toolhead 3D Printer

Best for: multi-material printing with high speed

Build Volume

270 X 270 X 270 mm

Print Speed

500 mm/s

Multicolor Capacity

4-Toolhead

Motion Structure

CoreXY

Color Printing

Multi-Color

Target Audience

Beginners

View on Amazon: Snapmaker U1 4-Toolhead 3D Printer Affiliate link

The Snapmaker U1 uses a 4-toolhead system with a 5-second tool changer for multi-color printing. It features a 270 x 270 x 270 mm build volume and CoreXY motion for speeds up to 500 mm/s. The printer includes a 3.5-inch touchscreen and remote app control. It suits makers who need fast, multi-material prints with minimal waste. This model supports rigid and flexible materials in a single print.

Pros

• 4-toolhead system with 5-second automatic tool changes
• Build volume of 270 x 270 x 270 mm
• Print speeds up to 500 mm/s on CoreXY frame
• Supports multi-material and mixed-material printing
• Includes remote app control and 3.5-inch touchscreen

Cons

• Heavier build at 59.1 pounds compared to competitors
• Smaller build volume than some alternatives
• No mention of built-in model library in specs

Good fit if

• You need fast multi-color prints with low waste
• You want to print mixed materials like TPU and PLA
• You prefer a CoreXY system for high-speed accuracy

Skip if

• You require a larger build volume than 270 mm
• You prefer a lighter and more compact machine
• You need a printer with a built-in model library

Verdict: Snapmaker U1 4-Toolhead 3D Printer is a practical choice for makers who value speed and multi-material versatility. It fits users who want to print complex, multi-color parts without manual filament swaps.

5 Also great

Bambu Lab A1 Mini Combo Multi-Color 3D Printer

Best for: Beginners wanting compact multi-color prints

Multicolor Capacity

Multi-Color

Leveling Type

Full-Auto Calibration

Extruder Type

1-Clip quick swap nozzle

Features

High Speed

Target Audience

Beginners

Dimensions

16.8 × 14.8 × 19.5 inches

View on Amazon: Bambu Lab A1 Mini Combo Multi-Color 3D Printer Affiliate link

The Bambu Lab A1 Mini Combo delivers multi-color printing in a compact form factor. It features 10,000 mm/s² acceleration and active motor noise cancellation for quiet operation at ≤48 dB. Full-auto calibration handles bed leveling and Z-offset without manual input. The 1-Clip quick swap nozzle simplifies maintenance. This bundle includes the AMS lite for vibrant, multi-material prints, making it suitable for beginners who value speed and ease of use.

Pros

• 10,000 mm/s² acceleration for high-speed precision
• Full-auto calibration for seamless setup
• Active motor noise cancellation keeps prints quiet
• 1-Clip quick swap nozzle for easy maintenance

Cons

• Smaller build volume compared to standard models
• Requires AMS lite for multi-color capability
• Limited to 4 colors with the included AMS lite

Good fit if

• You need a compact printer for small spaces
• You want reliable multi-color prints without manual calibration
• You prioritize quiet operation in your workspace

Skip if

• You require large-format prints exceeding mini dimensions
• You prefer manual control over auto-calibration processes
• You do not need multi-color printing capabilities

Verdict: The Bambu Lab A1 Mini Combo is an ideal choice for users seeking a compact, quiet, and automated multi-color printing experience. Its high acceleration and full-auto calibration make it particularly well-suited for beginners who want vibrant results without technical hassle.

6 Best budget

Entina Tina2C Mini 3D Printer

Best for: beginners printing small PLA projects

Build Volume

3.9" x 3.9" x 3.9"

Leveling Type

Auto Leveling

Compatible Material

PLA

Features

Wi-Fi, Fully Assembled

Target Audience

Beginners, Kids

Dimensions

11.4 × 8.6 × 8.6 inches

View on Amazon: Entina Tina2C Mini 3D Printer Affiliate link

The Entina Tina2C is a fully assembled FDM printer designed for beginners and kids. It features a compact 3.9 x 3.9 x 3.9 inch build volume and auto leveling for quick setup. The bundle includes 1kg of PLA filament in four colors. You can control it via the Poloprint app using WiFi or offline mode. Its quiet operation and magnetic build plate make it suitable for home desks and small workspaces.

Pros

• Fully assembled for immediate use
• Auto leveling reduces manual setup
• Includes 1kg of 4-color PLA filament
• WiFi and offline app control via Poloprint
• Compact 3.9 cubic inch build volume

Cons

• Small 3.9 x 3.9 x 3.9 inch build volume limits print size
• Compatible only with PLA filament
• Single nozzle system restricts multi-color printing

Good fit if

• You need a ready-to-use printer for kids or beginners
• You print small prototypes and creative projects
• You want a quiet, compact device for home desks

Skip if

• You require large format prints
• You need multi-color or multi-material capabilities
• You want to print with engineering materials like ABS

Verdict: The Entina Tina2C Mini 3D Printer is a practical entry-level option for users who prioritize ease of setup and small-scale PLA printing. It fits beginners who need a compact, fully assembled machine for home use.

7 Best 600mm/s

FLASHFORGE High-Speed Multi-Color 3D Printer

Best for: fast multi-color prints on small models

Build Volume

220x220x220mm

Print Speed

Up to 600mm/s

Multicolor Capacity

Up to 4 colors

Leveling Type

1-Click Auto Leveling

Motion Structure

CoreXY

Extruder Type

Direct drive

View on Amazon: FLASHFORGE High-Speed Multi-Color 3D Printer Affiliate link

The Flashforge AD5X is a CoreXY 3D printer built for speed, reaching up to 600mm/s. It supports multi-color printing with up to four colors simultaneously. The machine features a 220x220x220mm build volume and 1-click auto leveling. You get a direct drive extruder and remote app control. It suits users who need fast turnaround times for small to medium models.

Pros

• CoreXY structure with 600mm/s print speed
• Multi-color support for up to 4 colors
• 1-click auto leveling system
• Direct drive extruder with 300°C capability

Cons

• Smaller 220x220x220mm build volume limits large parts
• No built-in touchscreen display mentioned in data
• Requires assembly before first use

Good fit if

• You prioritize high print speeds over large build volumes
• You want multi-color capabilities in a compact footprint
• You prefer CoreXY kinematics for stability at high speeds

Skip if

• You need to print large objects exceeding 220mm
• You require a fully assembled unit out of the box
• You prefer a printer with a built-in touchscreen interface

Verdict: Flashforge AD5X CoreXY delivers rapid multi-color printing for small models. It fits users who value speed and compact dimensions over large build capacity.

Specifications side by side

Frequently asked questions

See also

• elegoo centauri carbon 2 combo 3d printer alternatives
• dji rs 2 combo alternatives