ELEGOO Mars 4 5 0.15mm Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This elegoo 3 PCs fep release review covers the ELEGOO Mars 4 and 5 0.15mm FEP Film (3-Pack). You get three replacement films designed for specific resin printers. The listing specifies a film thickness of 0.15mm and dimensions of 206mm by 146mm. These measurements ensure a proper fit for your build plate. The product is a consumable part that wears out during regular use. You need to replace it to maintain print quality. The data highlights its UV stability and smooth surface. This helps prevent resin from sticking during the curing process. It is a straightforward replacement part for your maintenance routine.
What stands out
- 95% UV light transmittance for faster curing
- 0.15mm film thickness for consistent layer adhesion
- Non-stick surface prevents resin adhesion
- UV stable material resists degradation over time
- Smooth surface free of wrinkles or bubbles
Who it fits
Good fit for
You should buy this if you own an Elegoo Mars 4, Mars 5, or Mars 5 Ultra printer. The specific dimensions of 206mm by 146mm match these models perfectly. The 0.15mm thickness is standard for these machines. You will appreciate the 95% UV transmittance because it ensures accurate curing. This film is ideal for users who want to maintain smooth print surfaces. It is also suitable for those who want a non-stick surface that makes model removal easy without damaging the print. The three-pack size offers enough replacements for regular maintenance.
Who should skip it
You should look at another option if you do not own a Mars 4, Mars 5, or Mars 5 Ultra printer. The dimensions of 206mm by 146mm are specific to these models. Other printers may require different sizes. You should also skip this if you are looking for a thicker film, as this is strictly 0.15mm. If you need a five-piece pack instead of three, you must choose the other variation listed. This product is only for replacement purposes. It does not include the printer itself or any other hardware components.
Verdict: This is a spec-accurate replacement film for Elegoo Mars 4 and 5 series printers. It offers reliable UV transmittance and proper dimensions for consistent print quality.
Key specs explained
Dimensions: 206mm*146mm
This size matches the build area of the Mars 4 and Mars 5 printers. You need these exact measurements to fit the frame correctly. If the film is too small, it will not cover the entire print bed. If it is too large, it may not seal properly. Always check your printer model before buying replacements to ensure a proper fit.
Film Thickness: 0.15mm
This thickness balances durability with flexibility. A 0.15mm film is thin enough to allow precise layer details but strong enough to resist tearing during printing. Thicker films can sometimes reduce resolution slightly. Thinner films might wear out faster. This standard thickness is common for resin printers, offering reliable performance for most everyday printing tasks.
Release Film Type: FEP
FEP stands for Fluorinated Ethylene Propylene. This material is transparent and chemically resistant. It prevents cured resin from sticking to the bottom of the tank. This non-stick property allows you to peel prints off easily. FEP is the standard material for most resin printer build platforms. It ensures consistent results across different resin brands.
UV Light Transmittance: 95%
High transmittance means 95% of the printer's UV light passes through the film. This ensures the resin cures fully and evenly. Lower transmittance can lead to weak layers or incomplete curing. This high value helps maintain print accuracy. It also allows the printer to work efficiently without needing excessive exposure times. This is a key factor for print quality.
FEP Material and Size Specs
The listing identifies this product as an FEP release liner film. FEP stands for fluorinated ethylene propylene, a type of fluoropolymer. This material is chosen for its flexibility and chemical resistance. According to the listing, the film has a non-stick surface. This property prevents cured resin from adhering strongly to the film. It also claims UV stability, meaning the material does not degrade quickly under light exposure. This suggests the film maintains its integrity over multiple prints.
The dimensions are listed as 206mm by 146mm. The thickness is specified as 0.15mm. These exact measurements are critical for the Mars 4 and Mars 5 printers. A film that is too thin might tear during installation or use. A film that is too thick can reduce the accuracy of the print layers. The listing states the surface is smooth and free of wrinkles. This evenness ensures the resin spreads uniformly across the build area.
You receive three pieces in this pack. This quantity allows for replacements without frequent ordering. The listing notes a 95% UV light transmittance. High transparency allows the printer’s light source to cure resin efficiently. This should lead to faster print times and sharper details. The easy release feature helps you remove models without damage. Installation is described as quick and hassle-free. You can swap the film without specialized tools.
Setup And Daily Use Guide
Installation is straightforward. The listing states the film is quick and easy to install. You do not face any hassle or time-consuming steps. The 0.15mm thickness provides a balance between durability and flexibility. This allows you to handle the film without immediate tearing. The dimensions of 206mm by 146mm fit the Mars 4 and Mars 5 frames. You align the film carefully to avoid wrinkles, scratches, or bubbles. A smooth surface ensures the resin adheres evenly. This uniformity is critical for consistent print quality.
During daily use, the 95% UV light transmittance plays a major role. This high percentage allows light to pass through efficiently. You benefit from faster curing times for each layer. The process is also more accurate. The non-stick surface prevents resin from bonding to the film. This property keeps the build plate clear for the next print. The film is UV stable. It does not degrade over time, which maintains its performance across many prints. You can remove models easily. The good release performance means you lift parts without damage. There is no need for excessive force or tools. This feature protects both the model and the film. You replace the film when it shows wear. The 3-pack offers a reliable supply. You maintain a consistent print environment. The material resists chemicals from liquid resin. This resistance extends the life of the film. You get a predictable result with each setup. The specs support a smooth workflow. You spend less time troubleshooting adhesion issues. The design focuses on reliability and ease of use.
Before You Buy This FEP Film
You should verify your printer model before ordering. This film is made for the Mars 4 and Mars 5 series. It also fits the Mars 5 Ultra. Check your device name carefully. Using the wrong size will cause leaks. You need a scraper and gloves for safe removal. Keep a spare film ready. Print resin degrades the film over time. The listing notes good UV transmittance. This helps your prints cure evenly. You will need isopropyl alcohol for cleaning. Wipe the film gently after each print. Do not use harsh chemicals. They can damage the non-stick surface. Store unused films in a cool place. Avoid direct sunlight. This keeps the material flexible. You might want the five-piece pack if you print often. It saves you from frequent replacements. This product is a consumable. It wears out. Plan your budget for regular updates. This ensures consistent print quality. It fits well with other resin printing tools. You need a wash and cure station too. This keeps your workflow smooth.
Check before you buy
- Confirm your printer is a Mars 4 or Mars 5.
- Check if you need the 3-pack or 5-pack option.
- Ensure you have IPA for cleaning the film surface.
- Verify the film dimensions match your printer build area.
The product at a glance
ELEGOO Mars 4 and 5 0.15mm FEP Film (3-Pack)
Best for: Mars 4/5 Ultra owners needing reliable FEP film
- Dimensions
- 206mm*146mm
- Release Film Type
- FEP
- Film Thickness
- 0.15mm
- Printing Technology
- Resin
View on Amazon: ELEGOO Mars 4 and 5 0.15mm FEP Film (3-Pack) Affiliate link
This is a pack of three ELEGOO FEP release liners sized 206mm by 146mm with a 0.15mm thickness. Designed for Mars 4, 5, and 5 Ultra printers, the film offers 95% UV light transmittance for faster curing. The smooth surface prevents wrinkles and bubbles, ensuring even resin adhesion. You get a non-stick surface that resists UV degradation, making model removal easy without damage.
Pros
- 95% UV light transmittance for accurate curing
- 0.15mm thickness provides a smooth, bubble-free surface
- Non-stick surface prevents resin adhesion and degradation
- Easy to install without hassle
Cons
- Limited to 3 pieces per pack
- Specific to 206mm by 146mm build volume
- No mention of included installation tools
Good fit if
- You own a Mars 4, 5, or 5 Ultra printer
- You need replacement FEP film for regular prints
- You want high UV transmittance for faster curing
Skip if
- You use a printer with a different build volume
- You prefer a thicker film for durability
- You need a larger quantity in one package
Verdict: ELEGOO 0.15mm FEP Film for Mars 4/5 is a reliable replacement for Mars 4, 5, and 5 Ultra users who value fast curing and easy model release. It fits those who need standard-sized films and want consistent print quality.
Specifications side by side
| Spec | ELEGOO Mars 4 and 5 0.15mm FEP Film (3-Pack) |
|---|---|
| Dimensions | 206mm*146mm |
| Release Film Type | FEP |
| Film Thickness | 0.15mm |
| Printing Technology | Resin |
| Size | 3PCS-Mars 4/5/5 Ultra FEP |
| Color | Mars 4/5/5 Ultra FEP |
Frequently asked questions
Does this FEP film work with the Mars 5 Ultra?
Yes, the listing confirms compatibility with the Mars 5 Ultra. It is designed for the Mars 4, Mars 5, and Mars 5 Ultra models. You can use this 3-pack for any of these printers. The dimensions match the build area for all three devices. This ensures a proper fit without leaks.
What material is the release film made from?
The film is made from FEP, which stands for fluorinated ethylene propylene. This is a type of fluoropolymer known for flexibility and chemical resistance. The non-stick surface helps prevent cured resin from adhering to the bottom. This material choice supports consistent print quality and easier model release.
How many FEP films are included in the package?
The package contains three FEP films. You receive a 3-pack of replacement liners. This allows you to have spares ready for future maintenance. The listing specifies the size as 3PCS for Mars 4/5/5 Ultra compatibility. You do not need to buy individual sheets separately.
Is the installation process difficult for new users?
No, the listing states that installation is quick and easy. You do not face any hassle or time-consuming steps. The 0.15mm thickness provides a balance between durability and flexibility. This makes handling the film straightforward. You can replace the film without significant technical knowledge.
What is the thickness of the FEP film?
The film has a thickness of 0.15mm. This specific measurement is listed for the Mars 4 and 5 series. The 0.15mm thickness helps balance durability with flexibility. It allows you to handle the film without immediate tearing. This thickness is standard for these printer models.
Can I use this film for resin curing?
The listing highlights that the film supports fast curing. It is designed for users who value consistent print quality. The non-stick surface aids in the release of cured resin. This helps maintain the integrity of your prints. It is suitable for standard resin printing workflows.