CHINDRAG 2PCS 3D Printer Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This chindrag 2pcs 3d printer review focuses on a protective accessory for resin printers. The product is a set of two screen protectors designed specifically for the Anycubic Photon Mono X 6Ks. Each film measures 9.1 inches and uses 0.1 mm thick PET material. The listing states a light transmittance of over 95%, ensuring UV rays pass through for proper resin curing. These specs define its role as a maintenance tool rather than a printing component. You get two films, along with installation tools, to safeguard your LCD panel from scratches and resin damage.
What stands out
- Compatible only with Anycubic Photon Mono X 6Ks LCD 3D Printers
- Made from 0.1 mm high-quality PET material
- Light transmittance exceeds 95% for UV curing
- Includes two 9.1-inch protectors and a plastic scraper
- Designed to prevent resin leakage damage and scratches
Who it fits
Good fit for
This product suits owners of the Anycubic Photon Mono X 6Ks who want to extend the life of their LCD screen. If you are concerned about resin leakage or accidental scratches, these films offer a practical barrier. The included tool kit makes installation straightforward for users who prefer a guided process. It is ideal for those who view screen replacement as a costly maintenance issue and prefer proactive protection. You will find this useful if you print frequently and want to avoid downtime due to screen damage.
Who should skip it
You should look at another option if you do not own the Anycubic Photon Mono X 6Ks. The data shows this protector is incompatible with other models like the Mono 2, M5S, or M7 series. It is also not suitable if you need a screen protector for a printer with a different screen size, such as 7.1 or 10.1 inches. Additionally, if you are looking for a permanent hardware upgrade rather than a temporary film, this product does not meet that need. It is strictly a consumable accessory for specific hardware.
Verdict: This is a spec-driven protection kit for a specific printer model. It offers a clear path to extend LCD lifespan without altering print quality.
Key specs explained
Compatible Models: Anycubic Photon Mono X 6Ks
This film is sized strictly for the Anycubic Photon Mono X 6Ks LCD 3D printer. You must verify your machine model before buying. It will not fit other screen sizes or different brands. Using the wrong protector can leave edges exposed or fail to adhere properly. This specificity ensures full coverage for the exact display dimensions of this particular resin printer model.
Advanced Material: 0.1 mm thickness high quality PET
The protective layer uses a thin polyethylene terephthalate film. This specific thickness balances durability with print quality. It is thin enough to not interfere with the light path, yet strong enough to resist scratches from cleaning tools. This material choice helps maintain the integrity of your LCD screen against daily wear and accidental contact.
Light transmittance: more than 95%
High light transmittance ensures that ultraviolet light passes through the film efficiently. This spec means your prints will cure correctly without significant delay or quality loss. If transmittance were lower, you might need to increase exposure times, affecting production speed. This value indicates the film is optically clear and suitable for precise resin curing.
Package Included: 2 x 9.1 inch Screen Protectors
You receive two protective films in this package. Since screen protectors can wear out or tear during installation, having a spare is practical. This count allows you to replace a damaged film without buying a new set. It provides a cost-effective solution for maintaining your printer screen over time, ensuring you always have a backup ready.
Design and build quality
According to the listing, this accessory is constructed from 0.1 mm thick PET material. This specific thickness is chosen to balance durability with optical clarity. The manufacturer states that light transmittance exceeds 95 percent. This specification ensures that ultraviolet rays pass through the film efficiently. You can expect the resin curing process to remain unaffected by the protective layer. The material choice prioritizes functional performance over aesthetic finish. The design is strictly utilitarian, focusing on protecting the LCD panel from scratches and resin leakage. This approach helps extend the lifespan of your printer screen.
The physical dimensions are listed as 9.37 inches in length and 6.77 inches in width. The height is noted as 0.5 inches, which likely refers to the packaging or stack rather than the film itself. The product model is identified as 9.1-2, corresponding to the 9.1-inch screen size of the Anycubic Photon Mono X 6Ks. This precise sizing means the protector will not fit other models like the Mono 2 or M5S. You must verify your printer model before installation. The package includes two protectors along with a tool kit and a plastic scraper. This layout simplifies the installation process for you. The included scraper helps remove bubbles during application. The design assumes you will handle the installation carefully to maintain screen integrity.
Setup and everyday use
Installing this screen protector requires careful preparation to ensure proper adhesion. You must first clean the printer screen using the included cleaning kit. This step removes dust and residue that could interfere with the film. Next, you peel off the backing layer and apply the 0.1 mm PET film to the LCD panel. The listing specifies using the provided plastic scraper to push out any trapped air bubbles. Once the film is smooth, you remove the front protective layer. The package includes two tool kits and a manual to guide this process. You also receive a second film and scraper for future replacements.
This accessory is designed exclusively for the Anycubic Photon Mono X 6Ks. It does not fit other models like the Mono 2 or M5S. The 9.1-inch size matches the specific display dimensions of that printer. Daily use involves exposing the protected screen to UV resin curing. The high light transmittance of over 95 percent ensures the film does not block the necessary ultraviolet rays. This allows your prints to cure correctly without delay or quality loss. The primary benefit during daily operation is protection against resin spills. The film acts as a barrier, preventing leaked resin from damaging the expensive LCD screen. It also shields the display from scratches during cleaning or maintenance. When the film becomes damaged or cloudy, you can replace it using the spare set included in the box. This simple swap helps extend the life of your printer's core component.
Before you buy this protector
You need to verify your printer model first. This film is strictly for the Anycubic Photon Mono X 6Ks. It will not fit other sizes. Check your machine label carefully. You should also gather a clean, dust-free workspace. The installation kit helps, but extra cleaning supplies are wise. Keep a soft cloth nearby for final wipes. Upkeep is simple. You just peel off the old film and clean the screen before applying a new one. The PET material resists scratches well. You do not need special tools beyond the provided scraper. This accessory fits alongside other maintenance items in your 3D printing setup. It is a small investment for screen safety. Consider buying multiple packs since replacements are needed over time. Store unused films in a cool, dry place. This ensures they remain flat and ready for use. You avoid costly screen repairs by staying vigilant. This product supports your printer longevity without complexity.
Check before you buy
- Confirm your printer is exactly the Anycubic Photon Mono X 6Ks.
- Ensure your workspace is clean to avoid dust bubbles during application.
- Check that you have the included scraper and cleaning kit ready.
- Verify the film size matches your screen dimensions precisely.
The product at a glance
CHINDRAG 9.1" Screen Protector for Anycubic Mono X 6Ks
Best for: Anycubic Photon Mono X 6Ks owners
- Primary Material
- PET
- Film Thickness
- 0.1 mm
- Printing Technology
- LCD
- Dimensions
- 9.37 × 6.77 × 0.5 inches
View on Amazon: CHINDRAG 9.1" Screen Protector for Anycubic Mono X 6Ks Affiliate link
This CHINDRAG screen protector is designed specifically for the Anycubic Photon Mono X 6Ks LCD 3D printer. It features a 0.1 mm thick PET film that allows over 95% light transmittance, ensuring UV rays cure resin effectively. The package includes two protectors along with installation tools like a scraper and cleaning kit. It helps prevent resin leakage and scratches, extending the life of your expensive LCD screen.
Pros
- Compatible specifically with Anycubic Photon Mono X 6Ks models
- 0.1 mm PET material maintains over 95% light transmittance
- Includes two screen protectors and a full installation tool kit
- Protects against resin leakage damage and screen scratches
Cons
- Only fits the specific Anycubic Photon Mono X 6Ks model
- Requires manual installation using the provided scraper and cleaning kit
- Does not protect the printer body or other components
Good fit if
- You own an Anycubic Photon Mono X 6Ks printer
- You want to protect your LCD screen from resin damage
- You prefer a DIY installation with included tools
Skip if
- You have a different Anycubic printer model
- You need a screen protector for a larger 10.1 inch display
- You want a pre-applied or automatic protection solution
Verdict: CHINDRAG 9.1" Screen Protector for Anycubic Mono X 6Ks is a practical accessory for owners of this specific printer who want to safeguard their LCD panel from resin and scratches. It is a solid choice if you are willing to perform the manual installation yourself.
Specifications side by side
| Spec | CHINDRAG 9.1" Screen Protector for Anycubic Mono X 6Ks |
|---|---|
| Primary Material | PET |
| Film Thickness | 0.1 mm |
| Printing Technology | LCD |
| Dimensions | 9.37 × 6.77 × 0.5 inches |
| Size | For Mono X 6Ks |
| Model | 9.1-2 |
Frequently asked questions
Does this protector fit my Anycubic Photon Mono X 6Ks?
Yes, this product is designed specifically for the Anycubic Photon Mono X 6Ks. The listing confirms it is a direct fit for this model. It will not work with other printers or different screen sizes. You must verify your machine model before purchasing to ensure compatibility.
How thick is the screen protector film?
The film is 0.1 mm thick. This specific thickness helps balance durability with optical clarity. It is thin enough to not interfere with the printing process while still offering protection against scratches and resin spills on your LCD panel.
What material is used for the protector?
The protector is made from PET material. This plastic film is chosen for its clarity and strength. It allows ultraviolet light to pass through effectively, which is essential for resin curing. The material ensures that print quality remains high.
How many protectors are included in the package?
The package includes two screen protectors. This allows you to have a spare on hand. You can replace the film if it gets damaged or scratched during use. It is a practical accessory for ongoing printer maintenance.
Does the protector affect light transmittance?
No, it does not negatively impact light transmittance. The manufacturer states that light transmittance exceeds 95 percent. This high clarity ensures that UV rays pass through the film efficiently. Your prints should maintain their intended resolution and detail.
Is installation difficult for this screen protector?
Installation requires careful preparation but is straightforward. You must clean the screen thoroughly using the included kit. Dust and residue can interfere with adhesion. You then peel off the backing and apply the film. It is a manual process.