BIGTREETECH ViViD Multi Color 3D Printer Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This bigtreetech vivid multi color 3d printer review focuses on the ViViD unit, which is a filament dryer and multi-color management system for Klipper-based machines. It integrates drying and automatic filament switching into one modular device. The two defining specs are its support for up to four colors per unit and its ability to chain up to four units for sixteen-color printing. It also features smart RFID control and auto backup feeding to keep your prints running smoothly.
What stands out
- Supports up to 16 colors by chaining four units
- Built-in filament dryer for hygroscopic materials
- Smart RFID automatic filament identification
- Auto backup feeding system to prevent interruptions
- Open-source integration for Klipper and custom CoreXY setups
Who it fits
Good fit for
You should consider this if you run a Klipper-based printer like Voron, Rat Rig, or Trident. It suits users who print with hygroscopic filaments such as Nylon or PETG, as the integrated dryer maintains material quality during printing. The modular design also appeals to those who want to expand their multi-color capabilities over time without replacing their entire setup.
Who should skip it
Skip this if you do not use Klipper firmware, as the device is designed for open-source integration with specific machine types. It is also not suitable if you need single-color printing only, since the system is built for multi-filament management. Additionally, if you prefer a closed ecosystem rather than modular expansion, the open-source nature and chaining requirements may not fit your workflow.
Verdict: The BIGTREETECH ViViD is a specialized tool for Klipper users who need reliable multi-color printing and filament drying. It fits well into modular, open-source setups but requires specific firmware compatibility.
Key specs for this dryer
Color Printing: Multi-Color
This feature allows you to print with multiple hues in a single job. The system supports four colors per unit. You can chain up to four units to reach sixteen colors. This helps you create detailed models without manual swaps. It suits makers who want vibrant results. Compare this to single-color dryers that lack switching logic.
Integrated Filament Dryer
The unit dries filament while you print. This keeps hygroscopic materials like Nylon and PETG in good shape. Moisture absorption causes defects, so this feature prevents issues during the job. You save time by not drying spools separately. It is ideal for users who print frequently. Look for this when buying tools for moisture-sensitive materials.
Klipper Optimized & Modular Design
It works with open-source Klipper firmware on machines like Voron or Rat Rig. The modular build lets you add more color modules later. This design supports future upgrades to your setup. You get flexibility as your printing needs grow. It fits well with custom CoreXY systems. Check your printer compatibility before buying to ensure smooth integration.
Smart RFID Control
RFID tags let the device identify filament automatically. This removes manual entry of material data. You reduce setup time and errors. The system manages filament info for a smoother workflow. This is useful for complex multi-color jobs. Compare this to manual input systems that require more user attention for each change.
Modular Design and Build Layout
According to the listing, the BIGTREETECH ViViD Multi-Color Filament Dryer features a modular and expandable architecture. This design choice means you can integrate the unit seamlessly with Voron, Rat Rig, Trident, and Vzbot machines. It also supports custom CoreXY setups and other Klipper-based printers. The open-source integration allows for future upgrades. You can add additional color modules as your needs grow. This flexibility ensures the system adapts to your specific machine configuration without requiring a complete hardware overhaul.
The unit manages four filaments per device. You can chain up to four ViViD units to unlock sixteen-color printing capability. This modular layout reduces manual filament changes. It makes complex multi-color printing more efficient. The built-in filament dryer keeps material in optimal condition during storage and printing. Print-while-drying capability maintains quality for hygroscopic materials like Nylon and PETG. These materials are prone to absorbing moisture, so continuous drying is practical for consistent results.
Smart RFID control identifies filament information automatically. This reduces repetitive manual operations. You spend less time configuring materials. The system provides clear real-time feedback via customizable RGB indicators. These indicators show filament status, drying progress, and system alerts. This layout helps you monitor operation at a glance. The design prioritizes workflow efficiency. It minimizes interruptions caused by empty spools. The auto backup feeding system loads filament automatically. This feature keeps the printing process smooth and consistent.
Setup And Daily Operation
The ViViD unit is designed for Klipper-based machines, including Voron, Rat Rig, Trident, and Vzbot systems. It integrates with custom CoreXY setups through open-source integration. This compatibility ensures it fits into existing multi-color workflows without requiring proprietary software locks. You can chain up to four units to support sixteen colors, allowing for significant expansion as your needs grow.
Daily use involves managing up to four filaments per unit. The system handles automatic filament switching, which reduces the need for manual changes during complex jobs. The built-in filament dryer maintains optimal material quality, particularly for hygroscopic plastics like Nylon and PETG. You can print while the dryer operates, keeping moisture levels low throughout the process.
Smart RFID control identifies filament types automatically. This feature detects and manages material information, simplifying setup and reducing repetitive manual configuration. The Auto Backup Feeding system provides automatic filament backup and loading. This mechanism helps minimize interruptions caused by empty spools or feeding issues, ensuring continuous operation.
Customizable RGB indicators offer real-time feedback on filament status, drying progress, and system alerts. You can monitor these indicators at a glance to track system health. The modular architecture allows you to add additional color modules in the future. This flexibility supports upgrades without replacing the entire unit. The combination of drying, identification, and automated switching creates a streamlined environment for multi-material printing. You spend less time configuring materials and more time producing prints.
Check Compatibility And Upkeep First
You should verify that your current Klipper setup supports the required open-source integration before purchasing. This unit works with Voron, Rat Rig, Trident, and Vzbot machines, but you must confirm compatibility with your specific custom CoreXY configuration. Since it handles up to four filaments per unit, you need to plan your filament storage and routing carefully. If you want sixteen colors, you will need to purchase and chain three additional units. The built-in dryer requires regular maintenance to keep hygroscopic materials like Nylon and PETG in optimal condition. You should also ensure your enclosure or print area can accommodate the modular design. This device fits best alongside other high-end Klipper tools rather than entry-level setups. It is not a standalone printer but a critical component for advanced multi-color workflows. Check your existing filament management system to see if it integrates smoothly with the RFID and auto-feeding features.
Check before you buy
- Confirm Klipper compatibility with your Voron or Rat Rig setup.
- Verify open-source integration works with your custom CoreXY machine.
- Plan for additional units if you need more than four colors.
- Ensure your workspace fits the modular dryer architecture.
The product at a glance
BIGTREETECH ViViD Multi-Color Filament Dryer
Best for: Klipper users needing multi-color and drying
- Color Printing
- Multi-Color
View on Amazon: BIGTREETECH ViViD Multi-Color Filament Dryer Affiliate link
The BIGTREETECH ViViD is a Klipper-optimized filament dryer and multi-color management unit. It supports up to 4 colors per unit, scaling to 16 colors when chained. The integrated dryer allows print-while-drying for hygroscopic materials like Nylon. Smart RFID control and auto backup feeding streamline the workflow. This modular system suits makers using Voron, Rat Rig, or custom CoreXY printers who need reliable material handling.
Pros
- Supports up to 4 colors per unit, expandable to 16 colors
- Integrated print-while-drying capability for hygroscopic filaments
- Smart RFID filament identification for automated management
- Auto backup feeding reduces interruptions from empty spools
Cons
- Requires Klipper-based firmware for operation
- Limited to 4 colors without chaining multiple units
- Modular setup demands additional hardware for high color counts
Good fit if
- You use a Klipper-based 3D printer like Voron or Rat Rig
- You print with hygroscopic materials such as Nylon or PETG
- You want to automate filament switching and drying
Skip if
- You use non-Klipper firmware like Marlin
- You only print single-color projects
- You prefer a plug-and-play unit without modular expansion
Verdict: The BIGTREETECH ViViD Multi-Color Filament Dryer is a specialized tool for Klipper users who need reliable multi-color and moisture control. It fits makers building complex systems with Voron or Rat Rig printers who value automated filament management.
Specifications side by side
| Spec | BIGTREETECH ViViD Multi-Color Filament Dryer |
|---|---|
| Color Printing | Multi-Color |
Frequently asked questions
What type of 3D printer is the BIGTREETECH ViViD?
It is not a standalone printer but a specialized filament dryer and multi-color management system. This device is designed to integrate with Klipper-based machines. It fits makers building complex systems with Voron or Rat Rig printers who value automated filament management. It handles drying and switching for your existing hardware.
How many colors can this unit handle?
The system supports four colors per unit. You can chain up to four units together to reach sixteen colors total. This scalability helps you create detailed models with a wide palette. It allows for complex multi-material workflows without needing to replace your entire setup. The modular design supports this expansion.
Which printer brands are compatible with the ViViD?
It integrates seamlessly with Voron, Rat Rig, Trident, and Vzbot machines. The unit also supports custom CoreXY setups through open-source integration. This compatibility ensures it fits into existing multi-color workflows. You can verify that your current Klipper setup supports the required open-source integration before purchasing to ensure a smooth installation.
Does it work with standard filament or only specific types?
It serves as a filament dryer and management system. The primary function is moisture control and automatic switching. It fits makers building complex systems who value automated filament management. While specific material types are not listed, it is designed for standard spools used in Klipper-based machines. It ensures dry filament for better print quality.
Is proprietary software required to use this device?
No proprietary software locks are required for integration. The unit works with Klipper-based machines through open-source integration. This approach ensures it fits into existing multi-color workflows. You can chain up to four units for sixteen colors. This open approach allows you to maintain control over your printer configuration and automation scripts.
Can I expand the color capabilities later?
Yes, the modular design allows for expansion. You can chain up to four units to reach sixteen colors. This feature allows you to print with multiple hues in a single job. The system supports four colors per unit initially. This expandability helps you create detailed models as your needs grow without buying a new system.
What is the main benefit of this device?
It combines drying and automatic filament switching into one modular device. This integration saves space and simplifies your workflow. It is best for Klipper users needing multi-color and drying capabilities. The device ensures reliable moisture control. This helps you achieve better print results with complex multi-material projects.