Aorita3D 290x210mm NFEP Film 5-Pack Review: Specs, Pros and Cons

What stands out

• 95% light transmittance for stable UV lighting
• 0.15mm thickness for consistent layer resolution
• 290x210mm A4 size fits common resin printers
• High-temperature resistance up to 250°C
• Dual-side protective film prevents surface damage

Who it fits

Key specs explained for Aorita3D films

Dimensions: 290x210x0.15mm

This size matches standard A4 resin printer build areas. You need this exact footprint to fit models like the Elegoo Saturn S or Photon Mono X 6K. If your printer requires a different width or length, these sheets will not cover the LCD screen properly. Always check your printer’s required film dimensions before purchasing to avoid fitment issues during assembly.

Release Film Type: NFEP

NFEP stands for Nano Fluorinated Ethylene Propylene. This material offers lower release force than standard FEP, meaning the cured resin model peels away from the film more easily. This reduces the risk of tearing delicate prints and improves overall print success rates. It is specifically designed for resin printing workflows where smooth bottom-layer separation is critical for quality.

Light Transmittance: 95%

A 95% transmittance rate allows most UV light from your printer’s LED array to pass through the film. This ensures consistent curing depth and sharp image resolution on each layer. Lower transmittance can lead to under-cured models or longer exposure times. This high clarity helps maintain stable UV lighting performance throughout the film’s usable life for reliable results.

Maximum Temperature: 250°C

This rating indicates the film can withstand heat up to 250°C without deforming. While resin printers typically run cooler, this durability protects the film from heat buildup during long prints. It also ensures the film remains stable if you handle it near warm components. This thermal resistance contributes to the film’s longevity and prevents warping that could ruin print quality.

Design and Build Quality

The listing describes these sheets as NFEP films with a thickness of 0.15mm. According to the listing, the material offers high-temperature resistance up to 250°C and electrical insulation. This construction supports repeated use in resin printing environments. The dual-side protective film design aims to prevent scratches or damage during handling. This feature helps maintain a smooth, flawless surface without wrinkles or bubbles, which is critical for consistent layer adhesion.

The dimensions are fixed at 290x210mm, matching standard A4 build areas. This specific footprint ensures compatibility with models like the Elegoo Saturn S, Saturn 2, and Photon Mono X 6K. You must verify your printer’s required size, as variations exist, including 280x200mm or 450x300mm options in the broader product line. Using the correct size prevents misalignment and failed prints.

The pack contains five films, providing a practical supply for ongoing projects. The NFEP material is noted for lower release force, allowing easier separation of cured models. This design choice contributes to a reported print success rate of up to 90% by reducing the risk of tearing delicate prints. The films resist resin corrosion, ensuring clear transmission of UV light for reliable curing. This build quality suits users who prioritize durability and consistent print results in their resin workflows.

Setup And Daily Use Guide

Setting up these Aorita3D films requires matching your printer’s build volume. The 290x210mm dimensions fit specific models like the Elegoo Saturn S, Saturn 2, and Photon Mono X 6K. You must verify your machine’s required footprint before installation. The pack contains five sheets, each measuring 290x210x0.15mm. This thickness provides a consistent barrier between the resin vat and the LCD screen. The dual-side protective film remains on the sheets until you are ready to install them. This design prevents scratches and dust accumulation during storage. Once the protective layers are removed, the smooth surface ensures no wrinkles or bubbles interfere with the print bed. Daily use benefits from the 95% light transmittance rate. This specification allows UV light to pass through efficiently, maintaining stable exposure for each layer. The material’s resistance to resin corrosion helps preserve clarity over time. You can reuse the films multiple times due to their high-temperature tolerance up to 250°C. The lower release force mentioned in the listing suggests easier model separation, which may contribute to a higher print success rate. Always ensure your printer supports NFEP or PFA film types. These sheets are not suitable for printers requiring different sizes, such as the 280x200mm or 450x300mm options. Proper alignment is critical for optimal results. The electrical insulation property adds a layer of safety for the printer’s internal components. Regular inspection for wear is recommended to maintain print quality.

Before You Buy Checklist

You need to verify your printer model matches the listed compatibility. The listing specifies support for Elegoo Saturn S, Saturn 2, Photon Mono X 6K, M3 Plus, Sonic Mighty 4K, E10, and X10. Ensure your machine uses the 290x210mm footprint. If your printer requires a different size, such as 280x200mm or 450x300mm, this pack will not fit. You should also check the film thickness. The listing states 0.15mm. Some printers may require different thicknesses for optimal peel forces. Keep in mind that these are replacement films. You will need a clean workspace to install them without dust or debris. The dual-side protective films must be removed carefully. Store unused sheets in a cool, dry place. This product sits alongside other resin consumables in the 1 options available. It serves as a direct replacement for worn FEP or NFEP sheets. Proper handling extends the lifespan of each film.

Check before you buy

• Confirm your printer model is in the compatibility list.
• Verify your printer build area is exactly 290x210mm.
• Check if your printer requires 0.15mm film thickness.
• Ensure you have a clean surface for installation.
• Compare with other 1 options for size needs.

The product at a glance

1

Aorita3D 290x210mm NFEP Film 5-Pack

Best for: Elegoo Saturn S and Photon Mono X 6K users

Dimensions

290x210x0.15mm

Maximum Temperature

250°C

Release Film Type

NFEP

Film Thickness

0.15mm

Printing Technology

Resin

Resolution

4K

View on Amazon: Aorita3D 290x210mm NFEP Film 5-Pack Affiliate link

This Aorita3D NFEP film pack includes five sheets sized 290x210mm with a thickness of 0.15mm. It offers 95% light transmittance for stable UV exposure. The material resists resin corrosion and withstands temperatures up to 250°C. Dual-side protective films prevent scratches. It suits resin printers like the Elegoo Saturn S, Saturn 2, and Photon Mono X 6K.

Pros

• 95% light transmittance for stable UV lighting
• 0.15mm thickness for clear print results
• High-temperature resistance up to 250°C
• Dual-side protective film prevents damage

Cons

• Limited to specific printer models like Saturn S and Photon Mono X 6K
• Requires manual replacement as a consumable part
• No mention of included applicator tools

Good fit if

• You own an Elegoo Saturn S or Saturn 2
• You need replacement films for a Photon Mono X 6K
• You want high light transmittance for better print quality

Skip if

• You use a printer requiring 280x200mm or larger sizes
• You prefer standard FEP over NFEP material
• You need films for printers outside the listed compatible models

Verdict: Aorita3D NFEP Film 290x210mm provides reliable 95% transmittance and durable 0.15mm sheets for compatible Elegoo and Phrozen resin printers. It fits users who need precise replacements for models like the Saturn S or Photon Mono X 6K.

Specifications side by side

Frequently asked questions

See also

• aorita3d nfep film 5pcs 290x210x0 15mm alternatives
• best Aorita3D resin 3d printer accessories
• easycargo 100pcs 12 sizes 15mm review
• yamaha stage custom birch 5pc review