Aorita3D 450x300mm ACF Release Film Review: Specs, Pros and Cons

What stands out

• ACF film type designed for higher durability than nFEP
• Heat resistance up to 260 °C with a melting point of 305 °C
• UV light transmittance of 92% for accurate layer curing
• Pack includes five 450x300mm sheets for extended use
• Compatible with Phrozen Sonic Mega 8K and Anycubic Photon M7 Max

Who it fits

Key specs explained for Aorita3D

Dimensions: 450*300*0.3mm

This size matches large-format resin printers like the Phrozen Sonic Mega 8K and Anycubic Photon M7 Max. The 450 by 300 millimeter footprint covers the build plate area effectively. You can cut the film into smaller sections, such as two A4 sheets, if needed. This ensures you have enough material for multiple print jobs without wasting the entire sheet on a single small model.

Film Thickness: 0.3mm

The film is 0.3 millimeters thick, which provides structural stability during the peeling process. This thickness helps maintain a flat surface, reducing the risk of tears when the build plate separates from the cured resin layer. A consistent thickness ensures uniform pressure distribution, which contributes to better print quality and fewer failed prints due to film deformation or uneven adhesion.

Release Film Type: ACF

ACF stands for Advanced Composite Film, which is a newer material than traditional nFEP. This type offers higher durability and resistance to wear. It allows you to print more models before needing to replace the film. If you are used to standard nFEP films, you will notice this material lasts longer and provides a smoother surface for your resin prints.

Maximum Temperature: 260 °C

The film can withstand temperatures up to 260 degrees Celsius. This high heat resistance ensures the film remains stable during long print sessions or in warmer environments. It prevents the film from degrading or melting, which could ruin your prints. This specification is crucial for high-speed printers that may generate more heat during operation compared to standard models.

UV light transmittance up to 92%

High UV transmittance means more light passes through the film to cure the resin. This results in sharper details and higher accuracy in your prints. With 92% transmittance, you get better exposure efficiency, which can reduce print times. This is beneficial for users who prioritize fine details and need consistent curing across the entire build plate without under-exposed areas.

Design and Build Quality

The listing states the film is made from ACF material, which stands for Acrylic Coated Fluoropolymer. This composition differs from standard nFEP films. The manufacturer claims this material provides higher durability and better heat resistance. According to the listing, the film withstands temperatures up to 260 degrees Celsius. The melting point is listed at 305 degrees Celsius. This thermal stability allows for stable operation during high-speed printing cycles. You do not need to change the film as frequently as with weaker alternatives. This design choice supports longer print jobs without interruption.

The physical dimensions are 450 by 300 millimeters, with a thickness of 0.3 millimeters. The package includes five pieces of this size. The large surface area covers the build plate of compatible machines like the Phrozen Sonic Mega 8K. You can cut the film into smaller sections, such as two A4 sizes or four six-inch squares. This flexibility allows you to manage waste or use specific sizes for different projects. The design prioritizes coverage and longevity over small-form factor convenience.

Light transmittance is rated at 92 percent. This high value ensures UV light passes through efficiently. The result is improved printing accuracy and smoother surface finishes. The layout is simple, consisting only of the film sheets. There are no additional tools or adhesives included. The finish relies on the coating to reduce sticking. This straightforward design focuses entirely on the core function of releasing cured resin. You get a durable, high-transparency surface that matches the requirements of large-format resin printers.

Setup And Daily Use Guide

Setting up this Aorita3D ACF release film pack is straightforward for compatible high-speed resin printers. The listing confirms it fits the Phrozen Sonic Mega 8K, 8K V2, 8KS, and the Anycubic Photon M7 Max. You receive five sheets measuring 450 by 300 millimeters with a thickness of 0.3 millimeters. This large format covers the build plate area fully. If your printer uses a smaller vat, you can cut the film into smaller sections, such as two A4 sizes or four six-inch squares, to save material. Daily use relies on the film’s high light transmittance, which the data states reaches 92%. This high transparency allows UV light to pass through efficiently, which supports accurate printing and smoother surface finishes. The ACF material offers better durability than standard nFEP films. You can print many models without needing to change the film frequently. The film also handles higher temperatures, working stably at up to 260 degrees Celsius. The melting point is listed at 305 degrees Celsius. This heat resistance helps maintain stability during long print jobs. Because the material is stronger, it helps create more accurate prints with a higher success rate. You do not need to worry about frequent replacements. The combination of high transmittance and robust material means you get consistent results. The setup involves simply placing the film over your vat’s FEP sheet or replacing it entirely, depending on your printer’s design. The large size ensures you have enough material for multiple projects or cuts.

Before You Buy Aorita3D Film

You need to verify your printer model first. This pack fits the Phrozen Sonic Mega 8K, 8K V2, 8KS, and Anycubic Photon M7 Max. It will not work with smaller machines. Check your build plate dimensions carefully. The film measures 450 by 300 millimeters. You can cut it into smaller sections if needed. Keep your printer clean. Resin residue can damage the ACF surface over time. Wipe the build plate gently after each print. Store unused films in a cool, dry place. This helps maintain their high light transmittance. The 92% UV transmission ensures consistent curing. Compare this option with other large-format films. It offers higher heat resistance up to 260 degrees Celsius. This makes it suitable for high-speed printing cycles. You get five sheets in the pack. This provides enough material for multiple large prints. Consider your total print volume before purchasing.

Check before you buy

• Confirm your printer is a Phrozen Sonic Mega 8K or Anycubic Photon M7 Max
• Verify your build plate is 450 by 300 millimeters
• Ensure you have cleaning supplies for the build plate
• Check that you need high heat resistance for your resin
• Confirm you can cut the film if your setup is smaller

The product at a glance

1

Aorita3D 450x300mm ACF Release Film Pack

Best for: large format resin printing

Maximum Temperature

260 °C

Release Film Type

ACF

Film Thickness

0.3mm

Features

High Speed

Resolution

8K

View on Amazon: Aorita3D 450x300mm ACF Release Film Pack Affiliate link

This ACF release film measures 450 by 300 millimeters with a 0.3 millimeter thickness. It offers 92 percent UV light transmittance for high printing accuracy. The material withstands temperatures up to 260 degrees Celsius. It fits Phrozen Sonic Mega 8K and Anycubic Photon M7 Max printers. You get five pieces per pack. This film suits users seeking durability and high success rates for large resin prints.

Pros

• ACF material provides higher durability than nFEP film
• UV transmittance reaches 92 percent for better accuracy
• Withstands stable operation at 260 degrees Celsius
• Pack includes five films for extended use

Cons

• Limited to specific printer models only
• Requires manual cutting for smaller print areas
• No mention of included installation tools

Good fit if

• You own a Phrozen Sonic Mega 8K or Anycubic Photon M7 Max
• You need large format resin printing capabilities
• You want to reduce film replacement frequency

Skip if

• You use a printer outside the compatible list
• You require pre-cut custom sizes
• You prefer nFEP film over ACF

Verdict: Aorita3D 450x300mm ACF Release Film delivers high heat resistance and durability for large resin printers. It fits users who print frequently on compatible Phrozen or Anycubic machines.

Specifications side by side

Frequently asked questions

See also

• aorita3d aorita 3d 5pc acf alternatives
• best Aorita3D resin 3d printer accessories
• creality pika 3d scanner review
• bedelite 3d ribbed jacquard grey review