ANYCUBIC Wash Cure Max Station Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
In this anycubic wash cure max station review, we look at the Wash & Cure Max 3.0. This post-processing unit combines washing and UV curing into one white device. It stands out for its massive 15.1-liter liquid capacity. The internal dimensions reach 305 x 165 x 300 mm. This volume allows you to process large resin prints that fit on most 13.6-inch or smaller printers. The machine weighs 41.8 pounds and measures 13.8 inches wide. It is designed for users who need to clean and cure models without switching equipment.
What stands out
- 15.1L wash capacity with 305 x 165 x 300 mm internal dimensions
- 25,000 μW/cm² curing energy with 18 cm irradiation distance
- 360° spray rinsing for bottom and small hole cleaning
- Customizable modes for washing, curing, or combined auto cycles
- Dual cleaning modes that save nearly 50% IPA consumption
Who it fits
Good fit for
This station suits makers who print large parts frequently. The 15.1L volume handles prints up to 13.6 inches. You benefit from the 360° spray system if you print models with complex bottoms or small holes. The customizable timers let you adjust wash and cure durations for different resins. If you want a single unit for both cleaning and post-curing, this setup saves bench space. It is ideal for those who print often and want to reduce manual cleaning effort.
Who should skip it
You should look elsewhere if you need a compact footprint. The unit measures 13.8 x 13.8 x 22 inches and weighs 41.8 pounds. It requires significant space on your workbench. If you only print small models, the large volume may be unnecessary. The data does not mention mobile app control or remote monitoring. Users who prefer fully automated, unattended operation without manual timer adjustments might find the customizable modes less convenient than preset-only systems.
Verdict: The ANYCUBIC Wash & Cure Max 3.0 offers a large, efficient solution for processing big resin prints. Its high curing energy and spray cleaning make it a practical choice for frequent users.
ANYCUBIC Wash Cure Max Key Specs
15.1L wash capacity
This volume allows you to process larger resin prints in a single batch. The internal dimensions of 305 x 165 x 300 mm fit models from printers with a 13.6-inch build volume. You can clean more parts at once, which reduces the total time spent on post-processing. This is useful if you print large or numerous models regularly.
25,000 μW/cm² curing energy
This value indicates the intensity of the UV light used to harden resin. Higher energy values mean the curing process is faster and more thorough. You can trust that the resin will set completely, reducing the risk of sticky surfaces. This spec helps you compare efficiency against other curing stations with lower output ratings.
18 cm irradiation distance
This measurement shows how far the UV light effectively reaches inside the chamber. An 18 cm distance ensures that taller models receive adequate exposure even at the top. You do not need to reposition parts frequently during the cycle. This consistency helps maintain uniform hardness across complex geometries and varying heights.
360° spray rinsing
This cleaning method uses jets to wash parts from all angles. It targets residual resin in small holes and bottom sections better than simple immersion. You save nearly 50% on IPA consumption compared to traditional methods. This feature keeps your prints clean while reducing the ongoing cost of cleaning solvents.
Design and Build Overview
The ANYCUBIC Wash and Cure Max 3.0 presents a straightforward, utilitarian design. According to the listing, the unit features a white finish on its exterior casing. This color choice helps the device blend into typical workshop or home office environments without drawing excessive visual attention. The overall form factor is boxy, prioritizing internal volume over aesthetic flair. You get a single count pack, meaning the device arrives as a standalone unit ready for integration into your resin printing workflow. The exterior does not advertise complex textures or premium materials, focusing instead on functional durability for a post-processing station.
Size and weight are significant factors in its physical presence. The listing specifies dimensions of 13.8 inches in width and length, with a height of 22 inches. This footprint requires a sturdy, flat surface capable of supporting the unit. The weight is listed at 41.8 pounds, indicating a substantial build that likely helps stabilize the machine during the vigorous 360° spray rinsing cycle. You should ensure your workbench can handle this mass without shifting. The layout is designed to maximize the internal 15.1-liter capacity, which dominates the internal space. This large volume means the device will occupy considerable counter or floor space. You need to plan your workspace layout carefully to accommodate these external dimensions, ensuring you have enough clearance for loading and unloading larger prints. The design is purely functional, supporting the high-capacity washing and curing tasks it is built for.
Setup And Daily Use Guide
Setting up the ANYCUBIC Wash and Cure Max 3.0 requires careful attention to its physical footprint. The listing specifies external dimensions of 13.8 inches in width and length, with a height of 22 inches. You must ensure your workspace can accommodate this 22-inch vertical clearance. The unit weighs 41.8 pounds, so you should place it on a stable surface that can support this significant mass without risk of tipping.
Once positioned, the device is ready for operation. The factory pre-configures the cleaning and curing protocols, allowing you to initiate processes with a single click. You can choose from automatic mode, which handles both washing and curing sequentially, or select independent washing or curing modes. Each mode allows you to customize the duration to match your specific print requirements. This flexibility lets you adjust the cycle length for different resin types or model complexities.
For daily use, the machine employs a 360-degree spray rinsing system combined with bottom-section cleaning. This dual approach targets residual resin on the model surface and in small holes or underneath the print. The design aims to reduce IPA consumption by nearly 50% compared to traditional immersion methods. After washing, the unit rotates the platform for 360-degree curing. It delivers high energy values of 25,000 μW/cm² over an 18-centimeter distance, ensuring thorough hardening of your finished models.
Before You Buy This Station
You need to verify that your printer’s build volume fits within the 13.6-inch limit specified for compatibility. The large 15.1-liter tank requires ample IPA or alternative cleaning solvents. You should budget for these consumables, as the unit saves nearly 50% compared to immersion methods but still uses liquid. Ensure your workspace can support the 41.8-pound weight and 22-inch height. This station replaces two separate devices, saving bench space. It fits well if you print large models frequently. If you mostly print small items, the extra volume may sit empty. Check your resin types against the UV curing specs. The 25,000 μW/cm² output handles most standard resins. Regularly clean the spray nozzles to maintain the 360° rinsing efficiency. This device suits those who want automated, streamlined post-processing without manual intervention.
Check before you buy
- Confirm your printer’s build volume is 13.6 inches or smaller
- Ensure your workspace supports the 41.8-pound weight and 22-inch height
- Stock up on IPA or compatible cleaning solvents for the 15.1L tank
- Verify your resin types work with the 25,000 μW/cm² UV output
The product at a glance
ANYCUBIC Wash and Cure Max Station
Best for: Large resin prints and solvent savings
- Printing Technology
- Resin
- Color
- White
- Dimensions
- 13.8 × 13.8 × 22 inches
- Weight
- 41.8 pounds
View on Amazon: ANYCUBIC Wash and Cure Max Station Affiliate link
The ANYCUBIC Wash & Cure Max 3.0 is a post-processing station designed for large resin prints. It features a 15.1-liter capacity and a wash volume of 305 x 165 x 300 mm. The unit includes 360-degree spray rinsing and a curing platform with 25,000 μW/cm² intensity. It supports automatic, wash-only, and cure-only modes. This machine suits users printing large models who need efficient cleaning and curing in one device.
Pros
- 15.1L wash capacity handles models up to 305 x 165 x 300 mm
- 360-degree spray rinsing reduces IPA consumption by nearly 50%
- Curing platform delivers 25,000 μW/cm² intensity for thorough hardening
- Auto mode streamlines the full wash and cure cycle
- Customizable duration for wash and cure modes
Cons
- Weighs 41.8 pounds, making it heavy to move
- Dimensions of 13.8 x 13.8 x 22 inches require significant desk space
- No mention of mobile app or remote control integration
Good fit if
- You print large resin models that exceed standard washer sizes
- You want to reduce solvent usage with spray-based cleaning
- You need a dedicated station for both washing and curing
Skip if
- You have limited workspace for a 22-inch tall unit
- You prefer lightweight equipment for easy relocation
- You rely on app-based automation for your workflow
Verdict: ANYCUBIC Wash & Cure Max 3.0 fits users with large build volumes who need high-intensity curing and solvent savings. It is a solid choice for those prioritizing capacity and cleaning efficiency over compact size.
Specifications side by side
| Spec | ANYCUBIC Wash and Cure Max Station |
|---|---|
| Printing Technology | Resin |
| Color | White |
| Dimensions | 13.8 × 13.8 × 22 inches |
| Weight | 41.8 pounds |
| Size | 1 Count (Pack of 1) |
| Model | Wash and Cure Max 3.0 |
Frequently asked questions
What are the external dimensions of the ANYCUBIC Wash and Cure Max Station?
The unit measures 13.8 inches in width and length, with a height of 22 inches. This footprint requires a dedicated workspace. The device weighs 41.8 pounds, indicating a sturdy build. You must ensure your bench can support this weight and size before purchase.
Is the ANYCUBIC Wash Cure Max suitable for large resin prints?
Yes, it is designed for large resin prints and solvent savings. The 15.1-liter capacity fits models from printers with a 13.6-inch build volume. This allows you to process bigger objects in a single batch without needing multiple cleaning cycles.
What color is the ANYCUBIC Wash and Cure Max 3.0?
The device features a white exterior finish. This color helps it blend into typical workshop or home office environments. The utilitarian design prioritizes function, but the white casing offers a clean aesthetic that matches many modern 3D printing setups.
How much does the ANYCUBIC Wash Cure Max Station weigh?
The station weighs 41.8 pounds. This significant weight suggests a robust internal construction. You should place it on a stable surface capable of bearing this load. The heavy base helps keep the unit steady during the washing and curing cycles.
What is the model number for this ANYCUBIC post-processing unit?
The specific model is the Wash and Cure Max 3.0. This designation identifies it within the brand's lineup. It combines washing and UV curing functions into a single white device. The model number helps you find compatible parts or updated manuals.
Does the ANYCUBIC Wash Cure Max save cleaning solvents?
Yes, the unit is optimized for solvent savings. Its large 15.1-liter tank allows for efficient reuse of cleaning agents like IPA. This design helps reduce the frequency of solvent changes, lowering your ongoing consumable costs over time.