ANYCUBIC Wash Cure 3 Station Review: Specs, Pros and Cons

What stands out

• 4-liter cleaning bucket with adjustable basket heights
• Curing area up to 160 by 180 millimeters
• Flexicure gooseneck light with 30,000 uW/cm² energy value
• Infinite rotary knob for 1 to 30 minute timing
• Operating noise under 65 decibels

Who it fits

ANYCUBIC Wash Cure 3 Key Specs

Cleaning bucket volume: 4L

This capacity allows you to soak larger resin prints or multiple smaller parts in a single session. A 4-liter volume is standard for home workshops, giving you enough solvent to fully submerge objects without frequent refills. You can clean more items at once, which saves time during batch post-processing compared to smaller units.

Curing area: 160 by 180 mm

This surface size accommodates models up to 160 by 180 millimeters. You can place standard print platforms directly on the curing bed. This fits most consumer-grade resin printers, such as the Photon Mono series. Larger prints fit without needing to flip or reposition them excessively during the UV exposure phase.

Gooseneck light energy: 30,000 uW/cm²

This intensity level targets specific areas within a 1 to 3 centimeter range. You can use the flexible neck to direct strong UV light onto overhangs or thick sections that need extra hardening. This localized power helps ensure detailed features cure fully, reducing the risk of sticky resin in complex geometry.

Noise level: under 65 dB

The machine operates quietly enough for home or office use. You can run the cleaning cycle without significant disruption to conversation or work. This decibel level is comparable to normal background noise, making it suitable for shared spaces where loud mechanical sounds would be distracting or annoying to others nearby.

Dimensions: 11.4 by 11.4 by 17.3 inches

These external measurements define the footprint and height of the unit on your workbench. You need a flat surface with at least this clearance to fit the device comfortably. The compact design helps it fit in smaller maker spaces, ensuring it does not dominate your workspace while remaining accessible for daily use.

ANYCUBIC Wash Cure 3 Build Details

The listing describes the unit as white, with a physical footprint of 17.3 by 11.4 inches. The height varies by configuration, reaching up to 25 inches for the XL version. This size allows the machine to sit comfortably on a standard workbench without consuming excessive floor space. The white finish is a practical choice for a workshop environment, as it reflects light during the curing phase. This helps you see the resin parts clearly while they harden under the UV lamps.

According to the listing, the cleaning basket is made of double-layer PP material. This plastic choice ensures the basket remains lightweight yet durable when handling wet prints. The basket features two adjustable heights, at 3.93 and 6.5 inches. This design lets you lower the platform for smaller objects or raise it for larger prints. You can adjust the IPA level to match the height, which saves solvent during the wash cycle. The basket also fits print platforms ranging from 5.9 to 7.3 inches wide.

Control is handled by an infinite rotary knob. You can use this dial to switch between cleaning and curing modes. The knob also sets the timer from one to thirty minutes. This layout keeps the interface simple and intuitive. The machine runs at a noise level not exceeding 65 decibels. This volume is quiet enough for home use, allowing you to operate the station without disturbing your daily routine or conversation.

Setup And Daily Operation Guide

The listing presents the ANYCUBIC Wash and Cure 3 Station as a straightforward post-processing tool. You do not need complex installation steps. The unit arrives as a single dual-purpose device. You place it on a flat surface. The physical footprint measures 17.3 by 11.4 inches. This size fits standard workbenches without requiring much space. The height varies by configuration, so you should check the specific model variant you select.

Daily use begins with compatibility. The machine supports resin printers with build volumes of 7.3 inches or less. This includes the Anycubic Photon Mono 4, Mono 2, Mars 3 series, Mars 4, and Mars 4 Ultra. You simply place your print platform into the cleaning basket. The basket features two height settings at 3.93 and 6.5 inches. This design allows you to adjust the IPA level. You can save solvent by matching the liquid depth to your print height.

Operation relies on a single rotary knob. You turn it to select cleaning or curing modes. The timer adjusts from one to 30 minutes. The gooseneck light offers flexible curing. It increases local energy value by 30,000 uW/cm² within a one to three centimeter range. This helps strengthen specific areas. The overall curing uniformity improves by twenty percent. The running noise stays below 65 decibels. This level ensures you can use the machine in quiet home offices or workshops without significant distraction.

Before You Buy The ANYCUBIC Wash Cure 3

You need to verify that your resin printer fits within the 7.3-inch build volume limit. The listing confirms compatibility with Photon Mono 4, Mars 3, and Mars 4 series units. Ensure your print platform height matches the basket’s two-level design for optimal solvent usage. You will require isopropyl alcohol and a waste disposal method for the spent liquid. The 4-liter bucket holds ample solvent, but you must manage the runoff responsibly. Maintenance involves rinsing the double-layer PP basket after each use to prevent resin buildup. The quiet operation under 65 decibels makes it suitable for home offices. Compare this unit against the XL-Wash and Cure Max 3 if you print large models. The standard size suits most hobbyists, while the Plus version may offer different capacity. Check the gooseneck light flexibility for your specific print shapes. This station integrates well with other tools in your 3D printing workflow, provided you have adequate ventilation.

Check before you buy

• Verify your printer’s build volume is 7.3 inches or smaller.
• Confirm your print platform height fits the basket’s two levels.
• Ensure you have a safe way to dispose of used IPA.
• Check if the 160 by 180 mm curing area suits your parts.
• Compare the standard size with the XL version for large prints.

The product at a glance

1

ANYCUBIC Wash and Cure 3 Station

Best for: Standard resin prints needing precise curing

Printing Technology

LCD

Color

White

Dimensions

17.3 × 11.4 × 11.4 inches

View on Amazon: ANYCUBIC Wash and Cure 3 Station Affiliate link

The ANYCUBIC Wash Cure 3 is a dual-function post-processing station for resin 3D prints. It features a 4-liter cleaning bucket and a 160x180 mm curing area. The twistable gooseneck light boosts local curing energy by 30,000 uW/cm². It operates quietly under 65 dB. You can adjust cleaning time from 1 to 30 minutes. It fits printers with platforms up to 7.3 inches wide.

Pros

• 4-liter cleaning bucket capacity
• 160x180 mm curing size
• Twistable gooseneck light for targeted curing
• Quiet operation under 65 dB
• Adjustable cleaning basket heights

Cons

• No app or remote control mentioned
• Manual rotary knob only
• No display screen listed

Good fit if

• You print with platforms up to 7.3 inches
• You need precise curing for small details
• You want quiet operation in your workspace

Skip if

• You need app-controlled automation
• Your print platforms exceed 7.3 inches
• You prefer digital displays for settings

Verdict: ANYCUBIC Wash Cure 3 with Gooseneck Light fits users who need quiet, precise curing for standard-sized resin prints. It suits those who value manual control and targeted light delivery over smart features.

Specifications side by side

Frequently asked questions

See also

• anycubic wash cure machine 3 0 alternatives
• best ANYCUBIC 3d printers under 1000
• anycubic photon p1 wash cure review
• best dishwashers with 3 Wash Cycles