ANYCUBIC Wash Cure 3 Gooseneck Review: Who It Fits and Who Should Skip It

What stands out

• 4-liter cleaning bucket volume for larger models
• Dual-layer basket with 100mm and 165mm height settings
• Gooseneck light delivering 30,000uW/cm² in a 1-3 cm range
• One-click toggle for cleaning and curing modes
• Timer adjustable from one to thirty minutes

Who it fits

ANYCUBIC Wash Cure 3 Key Specs

4L cleaning bucket volume

This capacity allows you to submerge larger resin prints without overcrowding the basket. You can clean more models at once compared to smaller 2-liter units. The extra space reduces the need for multiple cleaning cycles. This is useful if you print frequently or make bulky parts. It fits most standard LCD printer build volumes under 7.3 inches.

Dual-layer basket heights: 100mm and 165mm

These two adjustable levels let you position the basket for different platform sizes. You can lower it for smaller 5.9-inch printers or raise it for larger 7.3-inch beds. This flexibility ensures the basket sits correctly in the tank. It helps you save isopropyl alcohol by optimizing the water level. You do not need to buy different baskets for different printers.

Gooseneck light energy: 30,000uW/cm²

This intensity rating indicates strong ultraviolet output in a close range. You get better curing on tricky areas like thin supports or flat surfaces. The flexible neck lets you aim the light exactly where it is needed. This helps reduce sticky residue on your prints. It is a significant upgrade over standard fixed lights found on older stations.

Dimensions: 8.66 x 8.86 x 14.9 inches

These measurements define the footprint and height of the unit. You need a desk or shelf that fits this width and depth. The height allows for tall prints inside the bucket. It is compact enough for most home workshops. Check your workspace clearance before buying to ensure it fits alongside your printer.

Design and Build Analysis

According to the listing, the unit measures 8.66 inches wide, 8.86 inches long, and 14.9 inches tall. These dimensions fit on standard workbenches without consuming excessive floor space. The cleaning bucket holds 4 liters of isopropyl alcohol. This volume supports larger prints, though it requires a sturdy surface to handle the weight when full. The basket uses double-layered polypropylene material. This plastic resists chemical degradation from repeated IPA exposure. The basket adjusts to 100mm or 165mm heights. This flexibility allows you to use different printing platforms, from 5.9 to 7.3 inches. The design maximizes solvent efficiency by matching the basket height to the print size.

The gooseneck light attaches to the main housing. This flexible arm lets you position the curing source precisely over complex geometry. You can toggle the light on or off with a single click. The control interface is minimal, focusing on essential functions. You can set cleaning or curing modes and adjust timers from 1 to 30 minutes. The listing notes that the closed structure reduces noise. This means you can operate the device in quieter environments without significant disturbance. The finish is described as multi-color. This likely refers to the contrast between the white bucket and the black base or light housing. The layout keeps the basket and light in a single vertical column. This saves horizontal space while maintaining access to both functions. You do not need separate stations for washing and curing. The integrated design simplifies your workflow. The materials chosen prioritize durability and chemical resistance. This ensures the unit withstands daily use with harsh solvents. The adjustable basket height is a key practical feature. It allows you to optimize cleaning depth for different model sizes.

Setup And Daily Operation Guide

The listing describes a straightforward setup process for the ANYCUBIC Wash and Cure 3. You begin by placing the dual-layer cleaning basket inside the 4-liter bucket. The basket features two adjustable height settings at 100mm and 165mm. This adjustment allows you to accommodate printing platforms ranging from 5.9 to 7.3 inches. You select the appropriate height based on the size of your LCD 3D printer. This flexibility ensures that larger models fit comfortably without overcrowding the cleaning solution.

Daily use involves toggling between cleaning and curing modes with a single click. The unit supports timer settings adjustable from one to 30 minutes. This range gives you control over the duration of each post-processing step. The gooseneck light design operates independently, allowing you to toggle it on or off easily. This feature targets subtle areas like model tops and garment hems with an energy value of 30,000 uW/cm² within a one to three centimeter range.

The dual-layer basket design also helps maximize isopropyl alcohol efficiency. You can clean models using different platforms while conserving solvent. The closed structure and software optimization aim to reduce noise during operation. This creates a quieter working environment for your daily printing workflow. The unit combines these functions into a compact footprint, measuring 8.66 inches wide and 14.9 inches tall. You benefit from a streamlined post-processing station that handles both washing and curing tasks without requiring separate devices.

Before You Buy This Station

You need compatible isopropyl alcohol for the 4-liter bucket. Ensure your resin waste disposal method fits your workspace. The dual-layer basket adjusts to 100mm or 165mm, so verify your print platform height. This unit suits LCD printers with builds under 7.3 inches. Larger beds require the Max or Plus variants. The gooseneck light targets tricky areas, but you must manage IPA fumes. Regularly clean the basket to prevent resin buildup. Check that your ventilation system handles the closed structure’s exhaust. This station sits between basic washing cups and heavy-duty industrial units. It offers a middle ground for hobbyists who print frequently. If you only print small models occasionally, a simpler setup may suffice. For large prints, the standard 14.9-inch height might be tight. Consider the 22-inch version if you have tall prints. The device reduces manual scrubbing time. It does not replace proper resin safety gear. You still need gloves and eye protection. This tool streamlines post-processing but requires consistent maintenance.

Check before you buy

• Verify your printer bed size is under 7.3 inches.
• Check if your workspace has adequate ventilation for fumes.
• Ensure you have enough isopropyl alcohol for the 4L bucket.
• Confirm your print platform height fits the 100mm or 165mm basket settings.
• Decide if the standard height suits your tallest prints.

The product at a glance

1

ANYCUBIC Wash and Cure 3 with Gooseneck Light

Best for: Small LCD print post-processing

Dimensions

8.86 × 8.66 × 14.9 inches

View on Amazon: ANYCUBIC Wash and Cure 3 with Gooseneck Light Affiliate link

The ANYCUBIC Wash and Cure 3 is a post-processing station for LCD 3D printers. It features a 4-liter cleaning bucket and a dual-layer basket with adjustable heights of 100mm and 165mm. The unit includes gooseneck lights that deliver 30,000 uW/cm² of curing energy. You get dual modes for washing and curing, with timers adjustable from 1 to 30 minutes. The design supports platforms up to 7.3 inches wide.

Pros

• 4-liter cleaning bucket capacity
• Gooseneck lights reach 30,000 uW/cm²
• Dual-layer basket with two height settings
• Quiet operation with noise reduction
• One-click mode switching for wash and cure

Cons

• Limited to platforms 7.3 inches or smaller
• No mention of app or remote control
• Gooseneck light range restricted to 1-3 cm

Good fit if

• You print models that fit within a 7.3-inch build volume
• You need precise curing for detailed or small areas
• You want to save IPA with the dual-layer basket design

Skip if

• You print large models requiring a wider build platform
• You prefer manual control over automated timers
• You need curing light coverage beyond a 3 cm range

Verdict: ANYCUBIC Wash and Cure 3 with Gooseneck fits users with smaller LCD printers who need precise, localized curing for detailed models. It is ideal for those prioritizing IPA efficiency and quiet operation over large-format compatibility.

Specifications side by side

Frequently asked questions

See also

• anycubic wash cure 3 gooseneck alternatives
• best ANYCUBIC 3d printers under 1000
• anycubic photon p1 wash cure review
• best dishwashers with 3 Wash Cycles