ANYCUBIC 1kg PLA Filament Refill Review (2026): A Spec-Based Look

What stands out

• 1.75mm diameter with +/-0.02mm dimensional accuracy for smooth extrusion
• 1KG net weight of PLA material for extended printing runs
• Intelligent identification chip for seamless ACE Pro integration
• Neat winding design minimizes filament tangles
• Strong adhesion at 45°C reduces warping on cool plates

Who it fits

ANYCUBIC PLA Filament Key Specs

Material Type: PLA

Polylactic Acid is a biodegradable thermoplastic derived from renewable resources like corn starch. You get easy printing with low warping and minimal odor. It is ideal for beginners and general prototyping. Compare this to ABS, which requires higher temperatures and ventilation, or PETG, which offers more durability but sticks harder to build plates.

Filament Diameter: 1.75mm

This is the standard width for most desktop 3D printers. You can use it with almost any FDM machine on the market. It ensures smooth feeding through the extruder gear. If you buy a new printer, check its compatibility. Most hobbyist models accept this size, while larger industrial units often use 2.85mm or 3.0mm variants.

Dimensional Accuracy: +/-0.02mm

This tight tolerance means the filament thickness stays consistent throughout the spool. You get uniform layer height and fewer clogs or under-extrusion issues. Your prints will have better detail and strength. When shopping, look for tolerances under +/-0.05mm. This spec ensures reliable extrusion for precise models and functional parts without manual calibration.

Net Weight: 1KG

Each spool contains one kilogram of material. You can print roughly 100 to 200 grams of model depending on infill and size. This weight is standard for refill spools. It allows you to buy larger quantities for bulk projects. Compare this to smaller 0.5kg spools if you only need occasional colors for testing designs.

Design and Build Quality

According to the listing, this filament comes on a reusable spool. This design allows you to refill the spool rather than discarding it. You can obtain new spools by purchasing them directly, reusing old ones, or printing your own from Makeronline. This approach aims to reduce waste and lower long-term costs. The spool holds 1KG of material. The total weight of the package is 2.2 pounds. This size is standard for most desktop 3D printers.

The filament features neat winding. This layout minimizes tangles, which helps ensure smooth feeding into your printer. Smooth feeding reduces print failures caused by jams. The material is PLA, specifically Polylactic Acid. It has a tight dimensional accuracy of +/-0.02mm. This precision ensures uniform diameter throughout the spool. Uniform diameter leads to consistent extrusion and stable layer adhesion. You will likely see fewer bridging issues and more reliable prints.

The listing notes a special surface treatment on the filament. This treatment provides strong adhesion to cool plates at just 45℃. This feature helps decrease warping and bottom layer separation. This is particularly useful for smaller parts and large scale models. The filament also includes an intelligent identification chip. This chip enables seamless integration with the ACE Pro system. The system can automatically recognize print details for smarter operation. These build choices focus on reliability and ease of use for your printing projects.

Setup And Everyday Use

Setting up this ANYCUBIC PLA refill begins with your spool choice. The product relies on a reusable spool design rather than a disposable cardboard one. You can use existing spools, buy new ANYCUBIC ones, or print your own from Makeronline. This setup step is critical because the filament requires a compatible spool to function. Once loaded, the intelligent identification chip plays a key role. It enables seamless integration with the ACE Pro system. This chip allows for automatic print detail recognition. You do not need to manually input complex settings for basic operations. The system handles the identification process for you. This feature simplifies the workflow for users who own compatible multi-material systems. For daily use, the filament’s physical properties dictate the experience. The neat winding minimizes tangles, which ensures smooth extrusion. This reduces the likelihood of jams during long print jobs. The tight dimensional accuracy of +/-0.02mm guarantees stable dimensions. You can expect consistent layer adhesion and minimal bridging issues. The special surface treatment enhances adhesion at just 45°C. This lower temperature requirement helps decrease warping. It also reduces bottom layer separation, particularly for smaller parts. These specs suggest a stable printing environment. You benefit from uniform diameter control, which supports precise and consistent results. The 1KG net weight provides a substantial amount of material for extended projects. The texture grey finish offers a specific aesthetic for your final prints. Overall, the setup is straightforward if you have the right spool. The intelligent chip automates much of the configuration. Daily use focuses on the reliability provided by the tight tolerances and neat winding.

Before You Buy This Refill

You need a compatible spool before printing. This product does not include a spool. You must reuse an old one, buy a new ANYCUBIC spool, or print your own design from Makeronline. Check your printer’s filament path. The intelligent chip works with ACE Pro for automatic recognition. Other printers may not read the chip. You still need to load the filament manually. Keep the spool dry. Store it in a sealed container with desiccant. Moisture degrades PLA quality. Compare this to ABS or PETG if you need higher heat resistance. PLA is best for general prototyping. It prints at low temperatures with minimal warping. This refill is economical if you already have spools. It reduces waste. It fits well in your workflow if you value sustainability. Ensure your printer handles 1.75mm diameter. The tolerance is tight at +/-0.02mm. This ensures smooth extrusion. It is ideal for precise, consistent prints.

Check before you buy

• Confirm you have a compatible reusable spool.
• Check if your printer supports ACE Pro chips.
• Verify your printer accepts 1.75mm filament diameter.
• Ensure storage is dry to prevent degradation.

The product at a glance

1

ANYCUBIC 1kg PLA Filament Refill

Best for: reusing spools with ACE Pro printers

Material Type

PLA

Filament Diameter

1.75mm

Net Weight

1KG

Dimensional Accuracy

+/-0.02mm

Printing Technology

FDM

Weight

2.2 pounds

View on Amazon: ANYCUBIC 1kg PLA Filament Refill Affiliate link

This Anycubic PLA filament refill offers 1kg of 1.75mm material with a tight dimensional accuracy of +/-0.02mm. It features an intelligent chip for seamless ACE Pro integration and neat winding to prevent tangles. The texture grey finish provides strong adhesion at low temperatures, reducing warping. This refill is designed for users who want to reuse spools for a more economical and eco-friendly printing experience.

Pros

• 1kg net weight of PLA material
• 1.75mm diameter with +/-0.02mm tolerance
• Intelligent chip for ACE Pro compatibility
• Neat winding minimizes tangles
• Reusable spool design reduces waste

Cons

• Limited to PLA material type
• Requires compatible ACE Pro printer for chip features
• Only available in specific color options

Good fit if

• You want to reuse existing spools to save costs
• You need precise dimensional accuracy for consistent prints
• You use Anycubic ACE Pro printers

Skip if

• You require materials other than PLA
• You need automatic filament loading without a compatible printer
• You prefer pre-loaded spools without assembly

Verdict: Anycubic 1kg PLA Refill Filament suits users seeking economical, reusable spool printing with precise 1.75mm consistency. It is ideal for ACE Pro owners who value neat winding and strong adhesion for reliable results.

Specifications side by side

Frequently asked questions

See also

• anycubic pla filament refill 1 75mm alternatives
• best ANYCUBIC 1 75mm 3d printing filaments
• voigtlander voigtlander nokton 75mm f 1 5 review
• viltrox 75mm f 1 2 f1 2 pro review