ANYCUBIC 1.75mm Black PLA Filament Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This anycubic pla 3d printer review covers the ANYCUBIC 1.75mm Black PLA Filament (1kg). It is a standard thermoplastic spool designed for fused deposition modeling. The two specs that define this product are its 1.75mm diameter and its 1KG net weight. These figures determine how much material you get and how it feeds into your extruder. The listing claims tight dimensional accuracy of +/- 0.02mm. This consistency helps maintain steady flow rates. The filament is vacuum sealed with desiccants to prevent moisture absorption. It is marketed as clog-free and bubble-free. This packaging method aims to keep the PLA dry and ready for immediate use on your machine.
What stands out
- Dimensional tolerance of +/- 0.02mm for consistent layer fusion
- 1.75mm diameter compatible with most mainstream 3D printers
- 1KG net weight per spool for extended printing sessions
- Intelligent identification chips for seamless ACE Pro integration
Who it fits
Good fit for
You should choose this filament if you use an ANYCUBIC ACE Pro system. The intelligent identification chips allow automatic recognition of printing data. This feature simplifies your workflow by removing manual input errors. It also suits users who value consistent layer adhesion. The +/- 0.02mm tolerance ensures smooth extrusion without feed rate disruptions. If you print frequently, the 1KG weight provides ample material. The vacuum-sealed packaging helps maintain quality until you open it. This option is practical for standard black PLA projects.
Who should skip it
You should look at another option if you do not own an ACE Pro system. The intelligent identification chips offer no benefit without that specific hardware. This filament is also less suitable if you need varied colors. The primary listing is for black PLA only. While other colors exist in variations, this specific item is monochrome. If you require rapid drying without vacuum sealing, the current packaging may feel excessive. The focus on ACE Pro compatibility limits its appeal for generic printer setups that do not use smart spool recognition.
Verdict: This is a spec-driven PLA spool optimized for ANYCUBIC ACE Pro users. Its tight tolerance and smart chips make it a solid choice for compatible systems.
ANYCUBIC PLA Filament Key Specs
Filament Diameter: 1.75mm
This is the standard width for most consumer 3D printers. You need to match this size to your printer’s extruder input. If the diameter is wrong, the feeder gears cannot grip the filament properly. This size ensures broad compatibility with mainstream FDM machines. It allows you to swap brands easily without worrying about mechanical fit issues or requiring specific nozzle adapters.
Dimensional Accuracy: +/- 0.02mm
This tolerance level indicates high consistency in the filament's thickness. A tight variance means the printer extruder does not need to constantly adjust flow rates. You get smoother layer adhesion and fewer clogs. This accuracy reduces the risk of under-extrusion or over-extrusion. It is a critical spec for achieving precise geometric details and reliable print quality across different batches of material.
Material Type: PLA
Polylactic acid is a biodegradable thermoplastic derived from renewable resources like corn starch. It prints at lower temperatures than ABS or PETG, making it ideal for beginners. PLA offers low warping and minimal odor during printing. It is stiff and strong but can be brittle under high heat. This material suits general prototyping, decorative items, and educational projects where heat resistance is not the primary concern.
Net Weight: 1KG
This weight determines the total volume of material available for printing. One kilogram of 1.75mm PLA yields approximately 33 meters of filament. This quantity is standard for testing new colors or materials. It allows you to produce multiple medium-sized objects before needing a refill. The weight also affects shipping costs and storage requirements, making it a practical unit for home makers and small workshops.
Design and Build Details
This product is made from PLA plastic, a common material for fused deposition modeling. The listing specifies a filament diameter of 1.75mm with a dimensional accuracy of plus or minus 0.02mm. According to the listing, this tight tolerance helps the filament flow smoothly through the extruder. It reduces the risk of clogs caused by uneven thickness. The material is dried for 24 hours before packaging and sealed with desiccants to prevent moisture absorption. This process aims to keep the prints bubble-free and stable during printing.
The filament comes on a neat spool with a larger inner diameter. According to the listing, this design allows for smoother feeding and reduces thread pulling or twisting. The spool holds a net weight of 1KG. The physical spool measures 8.23 inches in width and length, with a height of 1.77 inches. These dimensions fit standard printer setups without requiring special adapters. The black color provides a uniform finish that resists warping.
The listing notes that the filament is compatible with mainstream printers and various printing speeds. It features an intelligent identification chip that works with the ACE Pro system. This chip allows for automatic identification of printing information. This feature simplifies the setup process for users who have compatible hardware. The combination of standard sizes and specific material treatments makes this filament suitable for general-purpose printing tasks.
Setup And Daily Usage Guide
Setting up this filament requires you to ensure your printer accepts 1.75mm material, which is the standard diameter for most consumer machines. The listing notes compatibility with a wide range of temperatures and speeds, so you can adjust your profile based on your specific hardware. If you own an ACE Pro system, the filament includes an intelligent identification chip. This chip allows the printer to automatically read printing information, which simplifies the initial setup process by removing the need for manual input.
For daily use, the packaging design aims to reduce friction. The spool features a larger inner diameter, which helps the filament feed more smoothly into the extruder. The listing also states the filament comes out neat on the roll, which should minimize crossing turns and thread pulling. This physical arrangement helps prevent jams during long prints.
Before use, you should check the vacuum seal. The product is dried for 24 hours and sealed with desiccants in a nylon bag. This step is critical because PLA absorbs moisture, which can cause bubbling or poor layer adhesion. Once opened, you must store the remaining spool in a dry environment to maintain the quality claimed in the listing. The dimensional tolerance of plus or minus 0.02mm suggests consistent layer height, which reduces the risk of clogging due to diameter fluctuations. You do not need to worry about sudden feed rate disruptions caused by thick or thin spots in the material. This consistency supports stable printing speeds without frequent interruptions.
Before you buy this filament
You need to verify your printer accepts 1.75mm filament before ordering. This ANYCUBIC spool weighs 1KG, which is a standard size for most consumer machines. The listing states it works with a wide range of temperatures and speeds, but you should check your specific printer’s manual to ensure compatibility. You will need to store the remaining filament in a dry place to maintain quality, as the product is vacuum sealed with desiccants. If you use an ACE Pro, the intelligent chip helps with automatic identification. This black PLA fits alongside other options in 3D Printers & Making Tools as a reliable, clog-free choice. It is not for large-format printers requiring 2.85mm. Ensure your extruder gears can grip the 1.75mm diameter properly. You may also want additional spools for longer prints, given the 1KG net weight. This product is designed for smooth feeding and minimal stringing.
Check before you buy
- Confirm your printer supports 1.75mm filament diameter.
- Check your printer's temperature range compatibility.
- Ensure you have dry storage for the spool.
- Verify your extruder gears grip 1.75mm properly.
The product at a glance
ANYCUBIC 1.75mm Black PLA Filament (1kg)
Best for: reliable prints with minimal stringing
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.02mm
- Printing Technology
- FDM
- Dimensions
- 8.23 × 8.23 × 1.77 inches
View on Amazon: ANYCUBIC 1.75mm Black PLA Filament (1kg) Affiliate link
This 1KG spool of ANYCUBIC PLA filament is designed for smooth, reliable printing. It features a strict dimensional tolerance of +/- 0.02mm for consistent layer adhesion. The material is vacuum-sealed and dried to prevent clogs. It works with most mainstream 3D printers and includes an intelligent chip for ACE Pro compatibility. You get a glossy finish with minimal stringing.
Pros
- Tight +/- 0.02mm dimensional tolerance
- Vacuum-sealed and dried for 24 hours
- Intelligent identification chip for ACE Pro
- Low shrinkage and stable dimensions
- Large spool inner diameter for smooth feeding
Cons
- Only compatible with ACE Pro for chip features
- Standard PLA limits heat resistance
- Single color option in this listing
Good fit if
- You need consistent layer adhesion
- You want to avoid clogging issues
- You use an ANYCUBIC ACE Pro system
Skip if
- You require high-temperature resistance
- You need multi-color printing in one spool
- You do not use mainstream PLA printers
Verdict: ANYCUBIC PLA 1.75mm Black Filament is a solid choice for users prioritizing dimensional accuracy and clog-free performance. It fits those who want reliable prints with minimal post-processing effort.
Specifications side by side
| Spec | ANYCUBIC 1.75mm Black PLA Filament (1kg) |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.02mm |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Dimensions | 8.23 × 8.23 × 1.77 inches |
| Weight | 3.53 ounces |
| Color | 1kg Pla Black |
Frequently asked questions
Is this filament compatible with most 3D printers?
Yes, the ANYCUBIC 1.75mm Black PLA Filament uses a standard 1.75mm diameter. This size is the universal standard for most consumer fused deposition modeling machines. You can load it into your printer’s extruder without needing adapters, provided your machine supports 1.75mm input.
What is the net weight of the spool?
The spool contains 1 kilogram of filament. This is a standard weight for consumer-grade materials, offering a good balance between quantity and manageable spool size. The packaging dimensions are listed as 8.23 inches by 8.23 inches by 1.77 inches.
Does this product come in black color?
Yes, the specific item is the ANYCUBIC 1.75mm Black PLA Filament. The listing identifies the color as black. This dark shade helps hide layer lines and provides a uniform appearance for finished prints without requiring additional painting or finishing steps.
What material is used to make this filament?
This filament is made from Polylactic Acid, commonly known as PLA. It is a thermoplastic derived from renewable resources like corn starch. PLA is popular for its ease of use and low warping, making it ideal for detailed models and prototypes.
How does the dimensional accuracy affect print quality?
The listing specifies a tight tolerance for the filament diameter. Consistent 1.75mm sizing ensures the extruder feeds the material at a steady rate. This reduces clogs and ensures uniform layer deposition, leading to prints with better dimensional accuracy and smoother surface finishes.
Is this filament suitable for beginners?
Yes, PLA is generally considered the best material for beginners. It prints at lower temperatures and does not require a heated bed. The ANYCUBIC version is designed for reliable performance with minimal stringing, allowing new users to achieve clean results with less troubleshooting.