ANYCUBIC Photon Mono 4 Ultra Review (2026): A Spec-Based Look

What stands out

• 7-inch 10K LCD screen with 9024 x 5120 resolution
• Print speed up to 120mm/h with high speed resin 2.0
• COB light source with ≥90% uniform rate
• Model tolerance controlled within +/- 0.01-0.05mm

Who it fits

ANYCUBIC Photon Mono 4 Ultra Key Specs

Print Speed: up to 120mm/h

This rate indicates how fast the printer lifts the build plate through the resin vat. It allows you to complete jobs quicker than standard models. This speed is particularly useful for producing multiple small parts in a single session. You should consider this metric if time efficiency matters for your workflow. Faster speeds reduce waiting time between prints.

Resolution: 9024 x 5120

This pixel count defines the clarity of your prints. Higher numbers mean finer details are captured on the model surface. You will see sharper edges and smoother curves on small figures or intricate jewelry. This resolution is ideal for users who need high precision. It helps distinguish small features that lower resolution printers might blur.

Pixel Size: 17x17μm

This measurement describes the physical size of each light pixel on the screen. Smaller pixels create smoother gradients and less visible stair-stepping on angled surfaces. You benefit from this by getting cleaner finishes without extensive post-processing. This size is a key indicator of the 10K class performance. It ensures fine details remain sharp.

Screen Size: 7''

This dimension refers to the diagonal length of the LCD display. A seven-inch screen offers a larger build volume than smaller units. You can print larger models in one piece, reducing assembly work. This size balances footprint with capacity. It is suitable for hobbyists who need more space than mini printers provide but lack room for large machines.

Printing Technology: Resin

This specifies the method used to create objects. Resin printers use liquid photopolymer cured by light. You get high detail and smooth surfaces compared to filament printers. This technology is best for miniatures, jewelry, and dental models. You should choose resin if surface finish quality is your priority over print speed or material strength.

Physical Design And Build

The listing describes the ANYCUBIC Photon Mono 4 Ultra as a gray unit measuring 15 inches in width and length, with a height of 27 inches. It weighs 11 pounds. These dimensions suggest a substantial footprint for your workspace. You will need ample room around the machine for ventilation and resin handling. The height allows for taller models without needing to pause prints, which is practical for detailed miniatures or larger prototypes.

According to the listing, the printer features a 4.3-inch high-definition touch screen with an all-new UI design. It supports eight languages, offering a straightforward interface for navigation. This control layout simplifies setup and monitoring. You can adjust settings directly on the device without relying solely on a computer. The screen placement aids in viewing print progress from a comfortable angle.

Internally, the build utilizes an 8mm T-type screw rod and precision guide rails. These components are chosen to ensure stability during the layering process. The machine also incorporates intelligent self-check functions to reduce operational frustration. This automated system handles routine diagnostics, allowing you to focus on resin preparation and post-processing. The design prioritizes precision and ease of use, making it suitable for users who value consistent detail in their resin prints.

Setup And Daily Use Overview

The ANYCUBIC Photon Mono 4 Ultra is designed for straightforward operation. It features a 4.3-inch high-definition touch screen with an all-new user interface. This display supports eight languages, which simplifies navigation for you. The machine includes intelligent self-check functions that run automatically. These checks help you avoid tedious manual operations before printing begins. You do not need to guess if the system is ready. The printer confirms its status for you.

The device uses a COB light source combined with a Fresnel lens. This setup achieves a light uniformity rate of at least ninety percent. This consistency controls model tolerance within plus or minus zero point zero one to zero point zero five millimeters. You get precise details without complex calibration steps. The printer also utilizes an advanced ACF film. This film, along with intelligent release algorithms, reduces the force needed to lift the build plate. This reduction shortens the printing time significantly.

Daily use involves loading resin and sending jobs to the screen. The maximum print speed reaches one hundred twenty millimeters per hour. This rate is sixty percent faster than previous models. You can complete jobs quicker when using high-speed resin. The machine’s physical dimensions are fifteen inches wide and deep, with a height of twenty-seven inches. It weighs eleven pounds. The 7-inch 10K LCD screen displays images clearly. Each pixel measures just seventeen micrometers. This precision ensures vibrant models with minimal effort on your part.

Before you buy resin printer

Owning this resin unit requires specific post-processing supplies. You will need isopropyl alcohol for washing prints and a UV curing station to finalize them. The printer uses standard resin cartridges, but you must verify compatibility with your preferred materials. The 10K screen demands high-quality resin to maintain its 17x17μm pixel precision. Inadequate resin can blur details despite the hardware capabilities. Consider your workspace ventilation. Resin fumes require proper airflow, so ensure your area is well-ventilated or equipped with an exhaust system. This model fits into the 1 options by prioritizing detail over speed. It suits users who value sharp edges and fine textures. If you print large, simple objects, other models may be more efficient. For miniatures or intricate jewelry, this unit excels. Regularly clean the build plate and screen to maintain accuracy. Check the 4.3-inch interface language support if you prefer non-English menus. The self-check feature helps, but manual maintenance remains essential for longevity.

Check before you buy

• Verify resin compatibility with your preferred brand
• Ensure workspace has adequate ventilation for fumes
• Check if you have a UV curing station
• Confirm isopropyl alcohol availability for washing prints
• Review language support on the 4.3-inch screen

The product at a glance

1

ANYCUBIC Photon Mono 4 Ultra 10K

Best for: High-detail resin printing with fast speeds

Build Volume

6.04''x3.42''x6.49''

Print Speed

up to 120mm/h

Printing Technology

Resin

Dimensions

15 × 15 × 27 inches

Weight

11 pounds

View on Amazon: ANYCUBIC Photon Mono 4 Ultra 10K Affiliate link

The ANYCUBIC Photon Mono 4 Ultra is a resin 3D printer featuring a 7-inch 10K LCD screen with 9024 x 5120 resolution. It achieves a print speed of up to 120mm/h using ACF film and intelligent release algorithms. The unit includes a COB light source for high uniformity and a 4.3-inch touch interface. This model suits users who need high precision and faster print times for detailed resin models.

Pros

• 10K LCD screen with 17x17μm pixel size
• Print speed up to 120mm/h
• COB light source with ≥90% uniformity
• 4.3-inch HD touch screen interface

Cons

• Large footprint measuring 15x15x27 inches
• Weight of 11 pounds reduces portability
• Requires manual leveling or calibration

Good fit if

• You need high-resolution detail for miniatures
• You want faster print speeds than standard models
• You have space for a 15-inch wide unit

Skip if

• You need a compact desktop printer
• You prefer FDM printing technology
• You want a lightweight portable device

Verdict: The ANYCUBIC Photon Mono 4 Ultra Resin Printer delivers 10K precision and 120mm/h speed for detailed resin work. It fits users who prioritize resolution and speed over a small footprint.

Specifications side by side

Frequently asked questions

See also

• anycubic photon mono 4 ultra alternatives
• best ANYCUBIC 3d printers under 1000
• anycubic photon mono 4 ultra review
• ympoynlbh compatible pico 4 ultra review