ANYCUBIC Kobra X Multicolor 3D Printer Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This anycubic kobra x multicolor 3d printer review covers a machine built for speed and color. It features a 260mm x 260mm x 260mm build volume and prints at up to 600mm/s. The system starts with four native colors but can expand to nineteen using ACE 2 Pro units. You get a hardened steel nozzle and auto bed leveling for consistent results. This setup targets makers who want to switch materials quickly without long purging times or manual calibration delays.
What stands out
- Native four-color printing expands to nineteen colors with ACE 2 Pro modules.
- Maximum print speed reaches 600mm/s with vibration compensation for smooth layers.
- LeviQ 3.0 auto leveling uses 49-point calibration for precise first layers.
- Dual-band Wi-Fi and LAN support remote monitoring via the Anycubic App.
- Hardened steel nozzle handles temperatures up to 300℃ for flexible filaments.
Who it fits
Good fit for
You should consider this printer if you need fast production cycles and multi-color output. The 260mm cube fits most desktop setups, and the high speed cuts print time significantly. If you print PLA, PETG, TPU, or ASA, the hardened nozzle and temperature range handle them well. The app connectivity helps you monitor jobs remotely. This is a strong choice for makers who want to reduce purging waste and increase throughput without manual bed leveling.
Who should skip it
Skip this option if you only need single-color printing or prefer manual leveling. The multi-color system adds complexity and cost if you do not use the ACE 2 Pro units. You must buy filament separately, so factor that into your needs. If you require a smaller footprint, the standard Kobra X is a lighter alternative. This machine is overkill for casual hobbyists who do not need high speed or mixed material capabilities.
Verdict: The Anycubic Kobra X offers high speed and expandable color options for efficient multi-material printing. It suits users who value rapid production and automated leveling over simplicity.
Key specs explained
Print Speed: 600mm/s
This maximum speed allows the printer to move the nozzle quickly across the build plate. You can finish standard test prints, like a Benchy, in about fourteen minutes. This speed suits users who need fast prototypes or high-volume production runs. Compare this to slower printers that take hours for the same model, as higher speeds reduce wait times significantly.
Build Volume: 260mm x 260mm x 260mm
The printer creates objects within a cube measuring 260 millimeters on each side. This space is large enough for most hobbyist projects and medium-sized functional parts. It fits on standard desks without taking up an entire room. When shopping, check if your usual designs fit inside this volume, as larger volumes allow for single-piece prints of bigger items.
Extruder Type: Hardened steel nozzle
The nozzle is made from hardened steel to resist wear from abrasive filaments. You can print materials like carbon fiber or glass-filled plastics without damaging the tip. This durability means you spend less time replacing parts. Compare this to standard brass nozzles, which wear down quickly when used with tough materials, requiring frequent maintenance.
Leveling Type: LeviQ 3.0, 49-point auto bed leveling
The system checks the bed flatness at forty-nine different points before printing. This ensures the first layer sticks evenly across the entire surface. You get consistent results without manual adjustments. This feature saves time and reduces failed prints. Look for this when buying, as manual leveling can be tedious and often leads to uneven adhesion on larger build plates.
Multicolor Capacity: 4 colors, up to 19 colors
The printer includes four built-in color channels for immediate multicolor printing. You can expand this to nineteen colors by adding extra ACE 2 Pro units. This flexibility lets you create complex, multi-hue models without manual filament swaps. Compare this to single-color printers, as this system handles vibrant designs natively, though expansion units are sold separately.
Design and Build Overview
The listing describes the Anycubic Kobra X as a grey unit with a substantial physical footprint. It measures twenty-three inches in length, thirteen inches in width, and twenty-two inches in height. The machine weighs twenty-point-nine pounds. This mass suggests a stable frame that resists vibration during high-speed operations. You should ensure your workspace can accommodate these dimensions comfortably.
According to the listing, the design includes a top-mount spool holder. This layout choice releases desktop space below the printer. The system supports mixed printing of rigid and flexible filaments, including PLA, PETG, TPU, PVA, and ASA. The nozzle reaches three hundred degrees Celsius. This temperature range allows you to handle engineering-grade materials without hardware modifications. The hardened steel nozzle is specified for high durability.
The printer features dual-band Wi-Fi and LAN connectivity. You can monitor status and control the machine remotely via the app. The listing also notes a large library of ten thousand models. The build volume of two hundred sixty millimeters on each axis provides ample room for medium-sized projects. The four-color ACE 2 Pro system is native, though expansion to nineteen colors requires additional units. The design prioritizes speed and material versatility within a fixed physical envelope.
Setup And Daily Operation
You can begin printing approximately fifteen minutes after unpacking the unit. This rapid readiness stems from the LeviQ 3.0 leveling system, which performs a forty-nine-point calibration. The advanced algorithm ensures bed flatness, allowing you to skip manual adjustments. The design includes a top-mount spool holder, which frees up desktop space during operation. You do not need to purchase filament separately, as the package does not include spools. You must acquire compatible materials yourself.
Daily use relies on dual-band Wi-Fi and LAN connectivity. You can monitor print status and control the machine remotely via the Anycubic App. The software includes AI features such as spaghetti detection and foreign object detection. These tools help you avoid failed prints without constant physical supervision. You also have access to a large library of ten thousand models for immediate printing.
The printer supports mixed materials, including rigid and flexible filaments like PLA, PETG, TPU, PVA, and ASA. You can utilize nozzle temperatures up to 300°C to handle these diverse substances. The native four-color system reduces filament waste by eighty-one percent compared to standard methods. This efficiency cuts material costs in half and doubles speed. You can expand the color capacity to nineteen colors by adding four ACE 2 Pro units. Note that ACE Pro units are incompatible with this system. The hardened steel nozzle and vibration compensation maintain layer smoothness even at high speeds.
Before You Buy This Printer
You will need to purchase filament separately, as the package does not include the four spools shown in images. This machine supports mixed printing of rigid and flexible materials like PLA, PETG, TPU, PVA, and ASA. Ensure your materials can handle the 300℃ nozzle temperature. The system starts with four native colors but expands to nineteen colors using four ACE 2 Pro units. Note that ACE 2 Pro and ACE Pro are incompatible, so verify your expansion plans match the correct hardware. You must also account for desktop space, as the top-mount spool holder requires clearance. This printer fits well alongside other options in 3D Printers & Making Tools if you prioritize speed and multicolor capability. It suits makers who want rapid prototyping without sacrificing detail. Check your workspace dimensions against its twenty-three by thirteen by twenty-two-inch footprint. Remote monitoring via dual-band Wi-Fi or LAN helps manage long prints, but you should still verify your network stability for reliable app connectivity.
Check before you buy
- Buy filament separately since it is not included in the box.
- Confirm ACE 2 Pro compatibility for expanding to nineteen colors.
- Ensure your workspace fits the twenty-three by thirteen by twenty-two-inch size.
- Verify your network supports stable dual-band Wi-Fi or LAN connection.
The product at a glance
Anycubic Kobra X Multicolor 3D Printer
Best for: Users wanting native 4-color printing and high speed
- Build Volume
- 260mm x 260mm x 260mm
- Print Speed
- 600mm/s
- Printing Technology
- FDM
- Multicolor Capacity
- Native 4-color, up to 19-color
- Leveling Type
- LeviQ 3.0 auto-leveling
- Extruder Type
- Hardened steel nozzle
View on Amazon: Anycubic Kobra X Multicolor 3D Printer Affiliate link
The Anycubic Kobra X is a 260mm x 260mm x 260mm 3D printer designed for native four-color printing. It reaches speeds of 600mm/s and uses LeviQ 3.0 for 49-point auto bed leveling. You can expand the system to 19 colors with additional ACE 2 Pro units. It supports rigid and flexible filaments up to 300℃. This printer suits makers who want efficient multicolor output without complex setup.
Pros
- Native 4-color printing with expansion to 19 colors
- High print speed up to 600mm/s
- LeviQ 3.0 with 49-point auto bed leveling
- Supports PLA, PETG, TPU, PVA, and ASA
Cons
- Filament is not included in the package
- ACE Pro units are incompatible with the system
- No physical display mentioned in specifications
Good fit if
- You want native multicolor printing without extra hardware
- You need high speed for faster project completion
- You print a mix of rigid and flexible materials
Skip if
- You require a complete kit with filament included
- You need to use ACE Pro color units
- You prefer a smaller 18.1-inch height model
Verdict: Anycubic Kobra X 260mm Multicolor Printer delivers fast, native four-color printing with a large build volume. It fits users who want to expand to 19 colors and print varied materials efficiently.
Specifications side by side
| Spec | Anycubic Kobra X Multicolor 3D Printer |
|---|---|
| Build Volume | 260mm x 260mm x 260mm |
| Print Speed | 600mm/s |
| Printing Technology | FDM |
| Multicolor Capacity | Native 4-color, up to 19-color |
| Leveling Type | LeviQ 3.0 auto-leveling |
| Extruder Type | Hardened steel nozzle |
| Color Printing | Multi-Color |
| Features | Built-in Camera |
| Target Audience | Beginners |
| Color | Grey |
| Dimensions | 23 × 13 × 22 inches |
| Weight | 20.9 pounds |
Frequently asked questions
What is the maximum print speed of the Anycubic Kobra X?
The Anycubic Kobra X reaches a maximum print speed of 600mm/s. This high velocity allows the nozzle to move quickly across the build plate. You can complete standard test prints, such as a Benchy, in approximately fourteen minutes. This speed is ideal for users who need fast prototypes or high-volume production runs.
How many colors can this printer print natively?
This printer features native four-color printing capabilities. It comes equipped with a multi-color system that allows you to print with four distinct colors simultaneously. The design supports varied material mixing, enabling efficient production of multi-colored objects without requiring manual filament swaps during a single print job.
What is the build volume of the Anycubic Kobra X?
The build volume measures 260mm x 260mm x 260mm. This cubic space provides ample room for large projects. The dimensions fit within a machine that is twenty-three inches in length, thirteen inches in width, and twenty-two inches in height. This size suits users who want to expand their printing capacity significantly.
Does the package include the filament spools shown in images?
No, the package does not include the four filament spools shown in promotional images. You will need to purchase filament separately. The machine supports mixed printing of rigid and flexible materials like PLA, PETG, TPU, PVA, and ASA. Ensure your chosen materials are compatible with the printer's specifications before starting.
How long does setup take after unpacking?
You can begin printing approximately fifteen minutes after unpacking the unit. This rapid readiness stems from the LeviQ 3.0 leveling system, which performs a forty-nine-point calibration. The advanced algorithm ensures bed flatness, allowing you to skip manual adjustments. This streamlined process gets you printing faster than traditional manual leveling methods.
What is the weight of the printer?
The printer weighs twenty-point-nine pounds. This mass suggests a stable base for high-speed operations. The substantial weight helps dampen vibrations during rapid nozzle movements. It measures twenty-three inches in length, thirteen inches in width, and twenty-two inches in height, providing a solid footprint for your workspace.
Can I expand beyond the four native colors?
Yes, the system can expand to nineteen colors. While it starts with four native colors, you can add more filaments to the system. This flexibility allows you to print a wider variety of colors. It fits users who want to expand their palette and print varied materials efficiently without changing hardware.