6 Best Alternatives to the ANYCUBIC Kobra S1 Enclosed CoreXY 3D Printer (2026)

Comparing Kobra S1 Alternatives

FLASHFORGE Adventurer 5M CoreXY 3D Printer

The FLASHFORGE Adventurer 5M matches the Kobra S1’s 600mm/s CoreXY speed and auto-leveling, but it lacks multicolor capability and an enclosed chamber. At 22 pounds, it is significantly lighter than the 39.7-pound Kobra S1, making it easier to move. You gain a simpler setup focused on single-color prototyping. The trade-off is losing the ACE 2 Pro system and active filament drying. This model suits users who prioritize speed and portability over large, complex multicolor projects. If you do not need heated chamber stability or multi-material handling, this lighter alternative offers comparable speed with less bulk.

Creality K2 Direct-Drive 3D Printer

The Creality K2 shares the 600mm/s print speed and auto-leveling features of the Kobra S1. It distinguishes itself with modular multicolor options and a built-in camera for monitoring. Unlike the Kobra S1, which has a fixed 4-color ACE 2 Pro system, the K2 allows flexible color configurations. It is slightly larger at 36 inches wide compared to the Kobra’s 16.1 inches. You get automated monitoring without the specific active drying chamber of the Kobra. This printer fits those who want speed and modular color flexibility. It is a strong choice if you prefer adaptable setups over the Kobra’s integrated, enclosed drying solution.

Creality K2 Pro Multicolor 3D Printer

The Creality K2 Pro Combo matches the Kobra S1’s 600mm/s speed and auto-leveling but adds a heated chamber and larger build volume. At 61.7 pounds, it is much heavier than the 39.7-pound Kobra S1. It supports multi-color printing similar to the Kobra but focuses on larger format engineering prints. You gain chamber stability for advanced materials but lose the specific active drying integration of the Kobra’s ACE 2 Pro. This model is ideal for users prioritizing large, complex multicolor parts. If you need heated chamber stability for difficult materials over the Kobra’s compact drying system, this is the better option.

FLASHFORGE Adventurer 5M PEI 3D Printer

The FLASHFORGE Adventurer 5M PEI matches the Kobra S1’s 600mm/s CoreXY speed and auto-leveling. It features a PEI build plate but lacks the enclosed chamber and multicolor system of the Kobra S1. Weighing 23.8 pounds, it is lighter than the Kobra S1’s 39.7 pounds. You gain a simpler, open-frame design focused on single-color high-speed printing. The trade-off is the loss of filament drying and multi-color capability. This printer suits users who value ease of use and print quality over enclosure benefits. If you do not need active drying or multicolor outputs, this lighter alternative provides similar speed with a simpler setup.

Flashforge Multi-Color Core XY 3D Printer

The Flashforge AD5X 4-Color CoreXY Printer matches the Kobra S1’s 600mm/s speed and 4-color capability. It shares the CoreXY structure and auto-leveling features. At 24.3 pounds, it is significantly lighter than the 39.7-pound Kobra S1. It offers automated filament management similar to the Kobra’s ACE system but lacks the active drying chamber. You gain a more compact footprint but lose the specific print-while-drying protection of the Kobra. This model fits users who want reliable multi-color output without the bulk of the Kobra. If you prioritize a smaller, lighter machine with similar color capabilities, this is a practical alternative.

Flashforge Adventurer 5M CoreXY 3D Printer

The Flashforge Adventurer 5M CoreXY matches the Kobra S1’s 600mm/s speed and CoreXY structure. It includes auto-leveling but lacks the enclosed chamber and multicolor system. Weighing 29.1 pounds, it is lighter than the Kobra S1. You gain fast single-color printing with easy nozzle swaps. The trade-off is the absence of the ACE 2 Pro system and active filament drying. This printer suits users who want reliable CoreXY performance without the complexity of multi-color setups. If you prioritize speed and automated setup over enclosure benefits and multicolor capabilities, this lighter alternative offers comparable speed with a simpler design.

Quick picks

Our 7 picks

1 Best overall

ANYCUBIC Kobra S1 Enclosed CoreXY 3D Printer

Best for: Fast 4-color CoreXY printing

Build Volume

250×250×250 mm³

Print Speed

600 mm/s

Printing Technology

FDM

Multicolor Capacity

4-color, expandable to 16 colors

Leveling Type

Auto Leveling

Motion Structure

CoreXY

View on Amazon: ANYCUBIC Kobra S1 Enclosed CoreXY 3D Printer Affiliate link

This enclosed CoreXY printer reaches 600mm/s with dual-motor stability. The ACE 2 Pro system supports 4-color printing, expandable to 16 colors. It features a 320°C hotend and active drying at 65°C. You get auto leveling and quiet 44dB operation. It suits users needing fast, multicolor FDM printing with filament protection.

Pros

• CoreXY motion structure for dual-motor stability
• Print speeds up to 600mm/s
• ACE 2 Pro supports 4-color printing
• Active drying at 65°C keeps filament dry
• 320°C hotend handles tough filaments

Cons

• Limited to 4 colors without extra hardware
• No mention of app or remote control
• Heavy at 39.7 pounds for desktop use

Good fit if

• You need fast CoreXY speeds up to 600mm/s
• You want 4-color printing with auto leveling
• You require active drying for filament storage

Skip if

• You need more than 4 colors out of the box
• You prefer a lighter printer under 30 pounds
• You require built-in app control for remote monitoring

Verdict: Anycubic Kobra S1 ACE 2 Pro delivers high-speed CoreXY printing with 4-color capability. It fits users who value fast multicolor output and filament drying over portability.

2 Best budget

FLASHFORGE Adventurer 5M CoreXY 3D Printer

Best for: fast single-color prototyping

Build Volume

220x220x220mm

Print Speed

Max 600mm/s

Leveling Type

Fully Auto Leveling

Motion Structure

CoreXY

Extruder Type

280°C Direct Extruder

Features

High Speed

View on Amazon: FLASHFORGE Adventurer 5M CoreXY 3D Printer Affiliate link

The FLASHFORGE Adventurer 5M is a CoreXY 3D printer designed for speed and ease of use. It features a 220x220x220mm build volume and reaches print speeds up to 600mm/s. The machine includes fully automatic bed leveling and a 280°C direct extruder. You get real-time monitoring via the Flash Studio app. This setup suits users who want fast prototyping without manual calibration.

Pros

• CoreXY structure for 600mm/s travel speed
• Fully automatic bed leveling system
• 280°C direct drive extruder
• Flash Studio app for remote monitoring

Cons

• 220x220x220mm build volume is smaller than some competitors
• Single-color printing only
• No mention of enclosed chamber for filament protection

Good fit if

• You need fast print speeds for rapid prototyping
• You want automatic leveling to save setup time
• You prefer remote monitoring via a mobile app

Skip if

• You require multi-color printing capabilities
• You need a build volume larger than 220mm
• You want an enclosed printer for high-temperature materials

Verdict: The FLASHFORGE Adventurer 5M CoreXY Printer delivers high-speed CoreXY performance with convenient auto-leveling. It fits users who prioritize speed and ease of use over large build volumes or multi-color options.

3 Also great

Creality K2 Direct-Drive 3D Printer

Best for: Fast printing with modular multicolor options

Build Volume

260 × 260 × 260 mm

Print Speed

600 mm/s

Multicolor Capacity

16-color

Leveling Type

Smart Auto Leveling

Extruder Type

Direct Drive

Color Printing

Multi-Color

View on Amazon: Creality K2 Direct-Drive 3D Printer Affiliate link

The Creality K2 is a direct-drive 3D printer with a 260 × 260 × 260 mm build volume. It supports multicolor printing by connecting up to four CFS units for 16 colors. You get a print speed of 600 mm/s and smart auto leveling that probes only the target area. A built-in AI camera monitors prints for failures. It comes pre-assembled for immediate use.

Pros

• 600 mm/s maximum print speed
• 16-color multicolor printing with CFS units
• Smart auto leveling for the target area
• Built-in AI camera for print monitoring
• Pre-assembled for plug-and-play setup

Cons

• Smaller 260 mm build volume than competitors
• Requires separate CFS units for multicolor
• No mention of app or remote control

Good fit if

• You want fast 600 mm/s printing
• You need multicolor options with CFS
• You prefer a pre-assembled printer

Skip if

• You need a larger build volume
• You want a fully integrated multicolor system
• You require app control

Verdict: Creality K2 3D Printer offers high speed and modular multicolor capabilities, making it a solid choice for users who prioritize print speed and flexible color setups over a larger build volume.

4 Best premium

Creality K2 Pro Multicolor 3D Printer

Best for: Large multicolor engineering prints

Build Volume

300×300×300mm

Print Speed

600 mm/s

Multicolor Capacity

Up to 16-color

Leveling Type

Auto leveling

Extruder Type

Direct drive, hardened steel gears

Chamber Heating

Up to 60°C

View on Amazon: Creality K2 Pro Multicolor 3D Printer Affiliate link

The Creality K2 Pro Combo is an enclosed CoreXY printer with a 300x300x300mm build volume. It prints at 600mm/s with 20,000mm/s² acceleration. The system supports up to 16-color multicolor printing via the CFS. A heated chamber maintains temperatures up to 60°C. Dual AI cameras monitor the process and auto-tune flow. This setup suits users needing large, fast, and stable prints with advanced material support.

Pros

• 600mm/s print speed with 20,000mm/s² acceleration
• 300x300x300mm build volume for large batches
• Up to 16-color multicolor printing with CFS
• Active chamber heating up to 60°C
• Dual AI cameras for monitoring and flow tuning

Cons

• 61.7 pounds weight limits portability
• 20x18x17 inch footprint requires significant desk space
• CFS smart filament system adds to the total package size

Good fit if

• You need to print large prototypes or multiple parts at once
• You want to use engineering materials like ASA or PPA-CF
• You require automated multicolor printing with up to 16 colors

Skip if

• You have limited desk space for a 20-inch wide machine
• You prefer a lightweight printer for easy relocation
• You only print small PLA models without multicolor needs

Verdict: Creality K2 Pro Combo 300mm delivers high-speed production and large-format multicolor capabilities. It fits users who prioritize chamber stability and automated monitoring for complex materials.

5 Best pei

FLASHFORGE Adventurer 5M PEI 3D Printer

Best for: Single-color high-speed printing

Build Volume

220x220x220mm

Print Speed

600mm/s

Leveling Type

1 Click Fully Auto Leveling

Motion Structure

Core XY

Extruder Type

Direct extruder

Features

High Speed

View on Amazon: FLASHFORGE Adventurer 5M PEI 3D Printer Affiliate link

The FLASHFORGE Adventurer 5M is a Core XY 3D printer designed for speed and ease of use. It features a 220x220x220mm build volume and reaches print speeds up to 600mm/s with 20,000 mm/s² acceleration. The direct extruder and one-click auto leveling simplify setup. You will get consistent results thanks to vibration compensation and a flexible PEI build plate.

Pros

• Core XY motion system for high-speed printing up to 600mm/s
• One-click fully auto leveling for accurate first layers
• Direct extruder with vibration compensation to reduce ghosting
• Flexible removable PEI steel build plate
• Power loss recovery and filament run-out sensor

Cons

• Open frame design limits use in dusty environments
• 220x220x220mm build volume is smaller than competitors
• No mention of multi-color printing capability

Good fit if

• You want fast prints with high acceleration
• You prefer a simple one-click leveling process
• You need a direct extruder for reliable filament feeding

Skip if

• You require a fully enclosed chamber
• You need a build volume larger than 220mm
• You want multi-color printing without extra hardware

Verdict: The FLASHFORGE Adventurer 5M 3D Printer offers Core XY speed and auto leveling for users who prioritize print quality and setup ease over a large build area or enclosed design.

6 Best fdm

Flashforge Multi-Color Core XY 3D Printer

Best for: Automated multi-color printing

Build Volume

220 * 220 * 220mm

Print Speed

600mm/s

Printing Technology

FDM

Multicolor Capacity

4 Colors

Leveling Type

Fully Auto Leveling

Motion Structure

Core XY

View on Amazon: Flashforge Multi-Color Core XY 3D Printer Affiliate link

The Flashforge AD5X is a CoreXY FDM printer with a 220 x 220 x 220mm build volume. It supports four-color printing via its Intelligent Filament System. You get a maximum speed of 600mm/s and 20,000mm/s acceleration. The all-metal frame aids stability. This model suits users who want multi-color output without manual swaps.

Pros

• Supports 4-color printing with Intelligent Filament System
• Core XY motion structure for stability
• Max print speed of 600mm/s
• 20,000mm/s acceleration capability
• Fully automatic leveling system

Cons

• 220 x 220 x 220mm build volume is smaller than competitors
• 24.3 pounds weight adds bulk
• No mention of Wi-Fi or app connectivity

Good fit if

• You need four-color prints without manual filament changes
• You want a Core XY frame for precision
• You prefer fully automatic bed leveling

Skip if

• You require a build volume larger than 220mm
• You need remote monitoring or app control
• You prioritize the lightest possible machine

Verdict: Flashforge AD5X 4-Color CoreXY Printer delivers reliable multi-color output with a stable Core XY frame. It fits users who value automated filament management over larger build sizes.

7 Also great

Flashforge Adventurer 5M CoreXY 3D Printer

Best for: fast single-color printing with auto leveling

Print Speed

Max 600mm/s

Leveling Type

Fully auto leveling system

Motion Structure

CoreXY

Extruder Type

280℃ Quick-Detach Nozzle

Features

High Speed

Color

Black

View on Amazon: Flashforge Adventurer 5M CoreXY 3D Printer Affiliate link

The FLASHFORGE Adventurer 5M is a CoreXY printer designed for speed and ease of use. It reaches a maximum print speed of 600mm/s while maintaining stability through its all-metal motion structure. The unit includes a fully automatic one-click leveling system that removes the need for manual calibration tools. It also features a patent quick-detachable nozzle that changes in three seconds. This model suits users who want high-speed output without complex setup.

Pros

• CoreXY motion structure for stable high-speed printing
• Maximum print speed of 600mm/s
• Fully automatic one-click leveling system
• Quick-detachable nozzle changes in 3 seconds

Cons

• No enclosure listed in specifications
• Single-color printing capability only
• Build volume limited to 220x220x200mm

Good fit if

• You want fast print speeds without manual bed leveling
• You prefer a CoreXY motion system for stability
• You need quick nozzle changes for different layer heights

Skip if

• You require multi-color printing capabilities
• You need an enclosed chamber for temperature control
• You prefer manual leveling over automatic systems

Verdict: The FLASHFORGE Adventurer 5M CoreXY is a practical choice for users who prioritize speed and automated setup. It fits those who want reliable CoreXY performance and fast nozzle swaps without the complexity of manual calibration.

Specifications side by side

Frequently asked questions

See also

• xtool ra2 pro xtool s1 alternatives
• inland pro 256gb SSD 3d alternatives