15 Best Matte 3d Printing Filaments, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right matte 3d printing filament reduces surface gloss and conceals layer lines across your builds. This guide compares 15 options strictly by the specifications published on their listings.
The SUNLU Carbon Fiber PETG Filament 1kg takes the top spot because its carbon fiber reinforcement and 250°C hotend requirement produce heat-resistant, high-strength parts. This comparison helps you decide which material composition, spool format, and dimensional tolerance match your printer hardware and printing needs.
Quick picks
The best fit for you
- You need heat-resistant functional parts with high structural strength SUNLU Carbon Fiber PETG Filament 1kg Its carbon fiber PETG composition provides heat resistance and structural durability with a low-glare matte finish.
- You want low-glare everyday display prints using standard PLA OVERTURE Matte PLA 1.75mm Filament (1kg) It provides ±0.02 mm dimensional accuracy and a low-glare PLA formulation to diffuse visible layer ridges.
- You own reusable spools for Bambu Lab AMS units Bambu Lab Matte PLA 1.75mm 1kg Refill This spool-free 1.75mm refill fits existing hardware and delivers ±0.03mm tolerance for AMS multi-material setups.
- You want multi-color decorative prints at high printing speeds iSANMATE Matte Tri Colors PLA Filament 1.75mm It supports print speeds up to 600 mm/s while extruding a tri-color coextrusion matte PLA profile.
Our 15 picks
SUNLU Carbon Fiber PETG Filament 1kg
Best for: Heat-resistant, high-strength matte mechanical parts
- Finish
- Matte (what this guide is about)
- Material Type
- PETG-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 150mm/s
- Dimensional Accuracy
- +/- 0.03mm
This 1kg spool from SUNLU pairs PETG with 10% carbon fiber reinforcement for a frosted matte black finish. It offers a 130°C heat distortion temperature and maintains a +/- 0.03mm dimensional accuracy across its 1.75mm diameter. You run it at nozzle temperatures between 240°C and 250°C with print speeds from 50 to 150mm/s. It suits you if you need low-glare, impact-resistant functional parts for indoor or outdoor use.
Pros
- 10% carbon fiber reinforcement adds strength and creates a frosted matte texture
- Heat distortion temperature rated up to 130°C
- Tight +/- 0.03mm diameter tolerance on standard 1.75mm filament
- Supports print speeds from 50mm/s up to 150mm/s
Cons
- Requires high nozzle temperatures between 240°C and 250°C
- Requires a heated bed between 50°C and 70°C
Good fit if
- You need heat-resistant prints that endure temperatures up to 130°C.
- You want a non-glossy, frosted matte black finish on functional parts.
- You run a 1.75mm FDM printer capable of reaching 250°C at the nozzle.
Skip if
- You use a 3D printer that cannot safely reach 240°C nozzle temperatures.
- You print on a machine without a heated build plate.
Verdict: SUNLU Matte Carbon Fiber PETG 1kg provides a durable, heat-resistant matte finish for outdoor and functional parts. Its operating specifications require hotends capable of reaching 250°C along with a heated print bed.
OVERTURE Matte PLA 1.75mm Filament (1kg)
Best for: diffusing layer lines on standard PLA prints
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75 mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.02 mm
- Surface Finish
- Matte
This is a 1.75 mm matte PLA filament sold on a 1 kg spool. It provides a frosted, gloss-free surface finish designed to reduce visible layer lines on finished parts. With a stated dimensional tolerance of ±0.02 mm and low shrinkage properties, you get consistent extrusion across standard 1.75 mm 3D printers. It suits you if you need clean display models, miniatures, or prototypes with non-reflective surfaces.
Pros
- Tight ±0.02 mm diameter tolerance via closed-loop adaptive control
- Frosted matte finish conceals layer lines on prints
- Engineered for low odor and low shrinkage
- One-year shelf life specified for unopened spools
Cons
- PLA base provides less heat resistance than PETG alternatives
- Shelf life rating requires unopened packaging with proper storage
Good fit if
- You need a non-reflective matte finish to hide layer lines on visual models.
- You run standard 1.75 mm 3D printers requiring ±0.02 mm dimensional accuracy.
Skip if
- You require the thermal or structural properties of PETG filament.
- You need printer filament in sizes other than 1.75 mm diameter.
Verdict: OVERTURE Matte PLA Filament 1.75mm 1kg delivers a low-glare surface texture and dependable ±0.02 mm dimensional accuracy for standard desktop 3D printers. It provides reliable extrusion and clean aesthetics for display prints.
YOOPAI Matte PLA 1.75mm 250g Bundle
Best for: multicolor prints and small-volume accent parts
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 250g
- Dimensional Accuracy
- ±0.02mm
- Surface Finish
- Matte
This bundle provides 1.75mm matte PLA split across compact 250g mini spools. Each spool features a low-reflection matte finish designed to diffuse light and reduce visible layer lines. With a ±0.02mm dimensional tolerance, it ensures steady extrusion across compatible FDM setups. It suits you if you produce small multicolor models, figurines, or accent parts and want multiple colors on hand without storing standard 1kg spools.
Pros
- Includes compact 250g mini spools for small multicolor projects
- Maintains ±0.02mm diameter dimensional tolerance
- Low-reflection matte finish conceals visible layer lines
- Precision-wound spools reduce feeding snags
Cons
- Requires a separate adapter for Bambu Lab AMS or AMS lite systems
- Mini 250g capacity is not suited for continuous large-format prints
- Compact 140mm spool diameter requires compatible holders
Good fit if
- You print multicolor models or small accents requiring varied colors in lower quantities.
- You want a low-gloss matte finish with tight ±0.02mm diameter tolerance.
- You use an external, top-mounted, or open spool holder accommodating 140mm spools.
Skip if
- You require standard 1kg spools for uninterrupted large prints.
- You run Bambu Lab AMS systems and do not want to use spool adapters.
Verdict: YOOPAI Matte PLA 1.75mm 250g Bundle delivers clean, low-reflection prints with reliable ±0.02mm diameter control across smaller spools. It is an efficient choice for multicolor prints and detail work without the storage demands of full-sized rolls.
eSUN 1kg Matte PLA Filament
Best for: durable matte display pieces and cosplay props
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Net Weight
- 1KG
- Surface Finish
- Matte
- Weight
- 2.2 pounds
This 1kg spool of eSUN Matte PLA provides a low-sheen, textured surface that hides layer lines across your prints. Wound on a recyclable paper reel, it features higher toughness than standard PLA to prevent brittleness in decorative models or cosplay accessories. If you want reliable feeding, easy-to-remove supports, and a non-reflective finish for display pieces without sanding, this spool suits your standard 1.75mm FDM setup.
Pros
- Matte finish reduces visibility of print layer lines
- Formulated with higher toughness than standard PLA to resist cracking
- Support structures peel away cleanly from printed surfaces
- Ships on a recyclable paper reel in vacuum-sealed packaging with desiccant
Cons
- Paper reel construction rather than a reusable plastic spool
- Available spool sizes are limited to 1kg and 2kg options
Good fit if
- You need a non-reflective matte surface that helps conceal visible layer lines.
- You want higher material toughness than standard PLA for display pieces or cosplay props.
- You prefer recyclable paper spools and vacuum-sealed packaging with desiccant.
Skip if
- You need higher heat or weather resistance than standard PLA provides.
- You prefer spoolless refills designed for reusable master spools.
Verdict: eSUN 1kg Matte PLA Filament delivers clean, low-glare prints with subdued layer lines and dependable impact resistance. Its recyclable paper reel and reliable feed consistency make it a solid everyday choice for decorative and prop printing.
ELEGOO Matte PLA Filament 1.75mm 1kg
Best for: standard open-frame FDM matte printing
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Matte
This 1kg spool of 1.75mm ELEGOO Matte PLA filament delivers a low-gloss, smooth finish designed to minimize visible layer lines on your FDM 3D prints. It features a specified dimensional accuracy of +/- 0.02mm and arrives vacuum-sealed with neat winding to prevent tangling. It fits standard 1.75mm FDM printers, though you must leave the door open if you run prints inside an enclosed machine.
Pros
- Dimensional accuracy of +/- 0.02mm
- Low-gloss matte finish conceals layer lines
- Vacuum-sealed packaging prevents moisture and bubbles
- Neatly wound spool reduces tangles and feeding issues
Cons
- Requires keeping the door open on enclosed 3D printers
- No print or bed temperature specifications listed in the data
Good fit if
- You use an open-frame 1.75mm FDM 3D printer.
- You want prints with a low-gloss surface and tight +/- 0.02mm tolerances.
Skip if
- You must print with the chamber door closed on an enclosed printer.
- You require a non-PLA filament such as PETG.
Verdict: ELEGOO Matte PLA Filament 1.75mm 1kg provides consistent +/- 0.02mm extrusion and a clean matte finish for open-chamber FDM 3D printers.
Bambu Lab Matte PLA 1.75mm 1kg Refill
Best for: Bambu AMS owners with reusable spools
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.03mm
- Surface Finish
- Matte
Bambu Lab Matte PLA Filament 1kg Refill is a 1.75mm spoolless filament designed for FDM printers and multi-material systems like the AMS and AMS Lite. It features a specified ±0.03mm dimensional tolerance and comes vacuum-sealed with desiccant in a 1kg pack. This material suits you if you already own empty reusable master spools and want a smooth matte beige finish without buying duplicate plastic hardware for every project.
Pros
- Specified diameter tolerance of ±0.03mm
- Designed for compatibility with AMS and AMS Lite systems
- Vacuum-sealed packaging includes desiccant
- Refill format eliminates single-use spool waste
Cons
- Requires a separate reusable spool to operate
- Not compatible with 2.85mm hardware
Good fit if
- You already possess compatible reusable spools for your printer.
- You feed filament through an AMS or AMS Lite setup.
Skip if
- You do not own a reusable spool to mount the refill.
- You use an extruder system designed for 2.85mm filament.
Verdict: Bambu Lab Matte PLA Filament 1kg Refill delivers precise ±0.03mm tolerance and seamless AMS integration for setups that already have spool hardware. It provides a clean matte beige finish while minimizing single-use plastic.
SUNLU Matte Green PLA Filament, 1kg
Best for: single-color green display models and low-glare parts
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 100mm/s
- Dimensional Accuracy
- +/- 0.02mm
This 1kg spool of SUNLU 1.75mm filament provides a low-gloss, matte green finish with a frosted texture designed to mask layer lines. It maintains a dimensional accuracy of plus or minus 0.02mm, operating at nozzle temperatures between 200°C and 230°C. With print speeds rated from 50 to 100mm/s, it gives you a reliable, glare-free option for display models, functional prototypes, and household prints requiring a solid green tone.
Pros
- Tight dimensional tolerance of +/- 0.02mm
- Spool dimensions fit 2.20-inch hub mounts
- Broad nozzle temperature window of 200°C to 230°C
- Low bed temperature requirement of 50°C to 65°C
Cons
- Recommended print speed tops out at 100mm/s
- Single-color spool offers no multicolor or gradient shift
Good fit if
- You need a solid green PLA that reduces surface gloss and layer visibility.
- You run standard 1.75mm FDM extruders operating between 200°C and 230°C.
Skip if
- You require multicolor, rainbow, or gradient transitions in a single spool.
- You print at speeds exceeding the recommended 100mm/s ceiling.
Verdict: SUNLU 1kg Matte Green PLA Filament delivers consistent +/- 0.02mm diameter accuracy and a low-glare surface for general FDM printing. It is a straightforward choice when you need a uniform green finish that hides layer ridges.
AMOLEN Matte PLA 1.75mm Rainbow 4-Pack
Best for: small decorative multi-color matte prints
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 200G x4
- Surface Finish
- Matte
- Color Effect
- Rainbow
This bundle provides four 200-gram spools of 1.75 mm matte PLA filament featuring multi-color rainbow transitions. The matte finish helps conceal layer lines on finished parts, while the standard 1.75 mm diameter works across standard consumer 3D printers. Each spool is pre-dried for 24 hours and vacuum-sealed with desiccant. You get four distinct color-shift variations in one package, making it suitable if you want color variety for smaller projects without buying full spools.
Pros
- Includes four 200 g spools with quick-transition rainbow colors
- Matte finish reduces visibility of print layer lines
- Pre-dried for 24 hours and vacuum-sealed with desiccant
- Mechanically wound on spools with a larger inner diameter
Cons
- Total filament weight is 800 g across small spools rather than a continuous 1 kg roll
- Requires storage in sealed bags after opening due to PLA moisture sensitivity
Good fit if
- You want multiple rainbow color combinations without buying individual full-size spools.
- You produce smaller decorative prints that benefit from matte layer-line masking.
Skip if
- You need continuous single-color spools or uninterrupted large prints over 200 g.
- You prefer high-temperature materials like PETG over standard PLA.
Verdict: AMOLEN Matte PLA 1.75mm Rainbow 4-Pack delivers convenient multi-color variety across four 200-gram spools with a clean matte texture. It is a practical bundle for decorative small-scale prints that require frequent color shifts.
SUNLU 1.75mm Matte PETG Refill 4kg
Best for: high-speed bulk printing with reusable spools
- Finish
- Matte (what this guide is about)
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 4KG
- Max Print Speed
- 600mm/s
- Surface Finish
- Matte
This four-kilogram bundle supplies 1.75mm matte black PETG filament in spool-less refill format. It supports print speeds from 30mm/s up to 600mm/s when paired with print temperatures between 205°C and 270°C. You will need a compatible master spool, such as a Bambu Lab or SUNLU reusable spool, to mount each roll. It suits you if you run high-speed printers and need bulk matte filament with low plastic waste.
Pros
- Supports print speeds from 30mm/s up to 600mm/s
- Compatible with Bambu Lab spools, AMS, AMS Lite, and SUNLU reusable spools
- Spool-less refill format eliminates disposable plastic spools
- Four-kilogram total package size supplies bulk material
Cons
- Requires separate reusable spools to operate
- Incompatible with second-generation SUNLU detachable spools
- Requires heated print bed temperatures between 70°C and 80°C
Good fit if
- You already have compatible Bambu Lab or SUNLU reusable spools.
- You print at high speeds up to 600mm/s.
- You want bulk matte black PETG without extra plastic spool waste.
Skip if
- You do not own compatible reusable spools.
- You use second-generation SUNLU detachable spools.
Verdict: SUNLU Matte PETG 4kg Filament Refill delivers high-speed matte printing for setups with compatible reusable spools. It provides bulk material while eliminating disposable plastic spools.
Creality Matte Rainbow PLA Filament 1.75mm
Best for: matte multi-color decorative FDM prints
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1 kg
- Surface Finish
- Matte
- Color Effect
- Rainbow
Creality Matte Rainbow PLA Filament 1.75mm gives you a non-glossy, multi-color finish on standard 1.75mm FDM 3D printers. The 1 kg spool features enhanced fluidity engineered for faster print speeds and low shrinkage to minimize warping. If you need a matte surface with continuous color transitions for decorative models without tuning specialized materials, this standard 2.2-pound spool fits setups from Creality, Bambu, and Anycubic.
Pros
- Matte rainbow finish reduces surface glare across color transitions
- High-fluidity formulation suited for faster print speeds
- Broad compatibility across FDM printers using 1.75mm filament
- Includes 12-month manufacturer after-sales support
Cons
- Requires dry and ventilated storage away from heat and humidity
- No specific transition interval or color-change length listed
Good fit if
- You want a non-reflective matte finish with shifting rainbow colors.
- You print on a 1.75mm FDM machine at standard or higher speeds.
Skip if
- You need a single solid color rather than a multi-color gradient.
- You work in high-heat environments requiring higher thermal resistance than PLA.
Verdict: Creality Matte Rainbow PLA Filament 1.75mm delivers a clean, low-glare gradient finish engineered for fast, low-shrinkage printing on common FDM systems. It is an effective option when you want multi-color aesthetics without using a multi-material system.
iSANMATE Matte Tri Colors PLA Filament 1.75mm
Best for: high-speed multi-color matte printing
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 600mm/s
- Dimensional Accuracy
- +/- 0.03 mm
View on Amazon: iSANMATE Matte Tri Colors PLA Filament 1.75mm
This 1.75 mm matte PLA+ coextrusion filament from iSANMATE combines three colors into a single strand for multicolor printing. It supports high print speeds ranging from 30 to 600 mm/s, operating between 190°C and 220°C on a 45 to 60°C heated bed. With a dimensional accuracy of +/- 0.03 mm, it suits makers who want fast printing speeds and multi-tone matte parts without changing spools.
Pros
- Supports print speeds from 30 up to 600 mm/s
- Coextruded tri-color design produces multi-tone prints
- Maintains dimensional accuracy within +/- 0.03 mm
- Broad nozzle temperature range between 190°C and 220°C
Cons
- Spool weight is approximately 1.1 pounds rather than a standard 1 kg roll
- PLA base requires storage in a sealed moisture-barrier bag after opening
Good fit if
- You run high-speed FDM printers reaching up to 600 mm/s.
- You want a tri-color matte finish without manual filament swapping.
- You print with nozzle temperatures in the 190°C to 220°C range.
Skip if
- You need standard 1 kg spools for high-volume or long-duration prints.
- You require a single solid color throughout your printed part.
Verdict: iSANMATE High Speed Matte Tri-Color PLA Filament offers rapid extrusion rates up to 600 mm/s combined with a three-tone matte finish. It provides a reliable high-speed coextrusion option for fast decorative prints.
LOVOON Matte Rainbow PLA 1.75mm 1kg
Best for: Large matte multi-color gradient prints
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Matte
LOVOON Matte Rainbow PLA is a 1.75mm multi-color filament designed for standard FDM 3D printers. It features a five-color matte pastel gradient that cycles through mint green, tiffany blue, lavender purple, coral pink, and peach fuzz every 150g. With a +/- 0.02mm diameter tolerance, it suits your larger multi-color prints or batch runs where you want diffuse pastel tones without standard glossy sheen.
Pros
- Cycles through five matte colors across approximately 150g of material
- Diameter tolerance held to +/- 0.02mm
- Vacuum-sealed with desiccant following a 24-hour drying cycle
- Matte formulation helps conceal layer lines
Cons
- Prints using under 150g of filament will not display the entire color gradient
- Recommended nozzle and heated bed temperatures are not provided in specifications
Good fit if
- You print models using at least 150g of material to showcase the full color spectrum.
- You want a multi-color gradient with a non-glossy, matte surface.
- You run a standard 1.75mm FDM printer that requires tight +/- 0.02mm diameter consistency.
Skip if
- You primarily produce small, low-mass prints that cannot complete the color transition.
- You need a uniform single-color matte print.
Verdict: LOVOON Matte Rainbow PLA 1.75mm 1kg delivers a five-color pastel shift with a matte finish across a 150g cycle. It is a practical pick if you want multi-color gradient parts without surface gloss.
SUNLU 1kg Matte Black PETG-CF Filament
Best for: Rigid functional prints needing low surface gloss
- Finish
- Matte (what this guide is about)
- Material Type
- PETG-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 150mm/s
- Dimensional Accuracy
- +/- 0.03mm
This 1kg spool of 1.75mm PETG filament blends 10 percent carbon fiber to produce a textured matte black finish. It offers a 70°C heat distortion temperature and 19kJ/m² impact strength for structural rigidity. Running at 240°C to 250°C nozzle temperatures, it suits you if you need durable, functional components like brackets or frames that eliminate surface gloss while maintaining dimensional stability.
Pros
- 10% carbon fiber infill creates a non-reflective matte surface
- Heat distortion resistance rated up to 70°C
- Structural impact strength rated at 19kJ/㎡
- Tight dimensional accuracy of +/- 0.03mm
Cons
- Not compatible with AMS, AMS Lite, or multi-color systems
- Requires pre-print drying at 70°C for 4 to 6 hours
- Requires high nozzle temperatures between 240°C and 250°C
Good fit if
- You need rigid structural parts with a textured matte finish.
- You operate standard spool holders rather than AMS multi-filament systems.
- You have a hotend capable of continuously printing at 240°C to 250°C.
Skip if
- You rely on AMS or AMS Lite automatic material switchers.
- You cannot dry filament at 70°C prior to printing.
Verdict: SUNLU 1kg Matte Black PETG-CF Filament provides high rigidity and a low-glare surface for heavy-duty components. Its abrasive carbon composition requires drying equipment and rules out multi-color feeding systems.
CHCKX Matte Rainbow PLA Filament (1kg)
Best for: colorful decorative prints with fast gradient transitions
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1 kg
- Dimensional Accuracy
- +/- 0.03 mm
- Surface Finish
- Matte
This 1kg spool of 1.75mm matte PLA from CHCKX delivers a non-glossy rainbow gradient shifting across purple, pink, and yellow. It shifts color every 8 to 10 meters along the strand and holds a dimensional accuracy tolerance of +/- 0.03 mm. Operating at nozzle temperatures between 200°C and 220°C with an AMS-compatible spool, it suits you if you produce decorative models requiring frequent multi-tone transitions without glossy surface glare.
Pros
- Fast color transition every 8 to 10 meters
- Standard +/- 0.03 mm dimensional tolerance
- Spool dimensioned to fit popular AMS units
- Dried 24 hours before vacuum sealing
Cons
- Recommended bed temperature is high at 70°C to 80°C
- Color rotation is limited to purple, pink, and yellow sequence
Good fit if
- You want rapid color changes every 8 to 10 meters on small or medium prints.
- You use an AMS setup and require compatible spool dimensions.
Skip if
- You need a single solid matte color across your entire print.
- Your print bed cannot reliably reach or maintain 70°C to 80°C.
Verdict: CHCKX Matte Rainbow PLA Filament (1kg) provides quick color transitions and reliable +/- 0.03 mm tolerances for low-glare decorative prints. Its spool fits standard AMS setups, though it demands higher print bed heat than standard PLA.
AMOLEN 1.75mm Smooth Matte PLA Filament
Best for: smooth matte decorative models and display pieces
- Finish
- Matte (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Surface Finish
- Matte
- Weight
- 2.2 pounds
This 1 kg spool of AMOLEN 1.75mm matte PLA delivers a smooth matte finish designed to soften visible layer lines. It features mechanically wound filament with a wide inner spool diameter to reduce snags during feeding. The material arrives pre-dried for 24 hours in a vacuum-sealed bag with desiccant. It suits you if you want clean surface quality on decorative models and display pieces using standard PLA printer settings.
Pros
- Smooth matte finish softens the appearance of print layer lines
- Pre-dried for 24 hours and vacuum-sealed with desiccant
- Mechanical winding and larger spool core diameter prevent tangles
- Standard 1.75mm diameter fits most PLA-compatible 3D printers
Cons
- PLA formulation offers less heat and chemical resistance than PETG
- Solid color spool lacks multi-tone gradient or color-shift effects
Good fit if
- You want a smooth matte finish that reduces layer-line visibility on display models.
- You need 1.75mm PLA filament that is pre-dried and vacuum-sealed out of the box.
- You prefer neatly wound spools with a larger inner core to prevent feeding jams.
Skip if
- You need the outdoor durability and temperature resistance of PETG.
- You want automatic multi-color transitions on a single print.
Verdict: AMOLEN 1.75mm Smooth Matte PLA Filament provides a clean matte texture and tangle-resistant winding for decorative prints. It delivers reliable layer adhesion and minimal warping for makers prioritizing surface finish over high-heat resilience.
Specifications side by side
| Spec | SUNLU Carbon Fiber PETG Filament 1kg | OVERTURE Matte PLA 1.75mm Filament (1kg) | YOOPAI Matte PLA 1.75mm 250g Bundle | eSUN 1kg Matte PLA Filament | ELEGOO Matte PLA Filament 1.75mm 1kg | Bambu Lab Matte PLA 1.75mm 1kg Refill | SUNLU Matte Green PLA Filament, 1kg | AMOLEN Matte PLA 1.75mm Rainbow 4-Pack | SUNLU 1.75mm Matte PETG Refill 4kg | Creality Matte Rainbow PLA Filament 1.75mm | iSANMATE Matte Tri Colors PLA Filament 1.75mm | LOVOON Matte Rainbow PLA 1.75mm 1kg | SUNLU 1kg Matte Black PETG-CF Filament | CHCKX Matte Rainbow PLA Filament (1kg) | AMOLEN 1.75mm Smooth Matte PLA Filament |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material Type | PETG-CF | PLA | PLA | PLA | PLA | PLA | PLA | PLA | PETG | PLA | PLA | PLA | PETG-CF | PLA | PLA |
| Filament Diameter | 1.75mm | 1.75 mm | 1.75mm | not specified | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
| Net Weight | 1kg | 1kg | 250g | 1KG | 1KG | 1kg | 1KG | 200G x4 | 4KG | 1 kg | 1KG | 1KG | 1KG | 1 kg | 1KG |
| Max Print Speed | 150mm/s | not specified | not specified | not specified | not specified | not specified | 100mm/s | not specified | 600mm/s | not specified | 600mm/s | not specified | 150mm/s | not specified | not specified |
| Dimensional Accuracy | +/- 0.03mm | ±0.02 mm | ±0.02mm | not specified | +/- 0.02mm | ±0.03mm | +/- 0.02mm | not specified | not specified | not specified | +/- 0.03 mm | +/- 0.02mm | +/- 0.03mm | +/- 0.03 mm | not specified |
| Surface Finish | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte |
| Printing Technology | not specified | not specified | not specified | not specified | FDM | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Color Printing | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Multi-Color | not specified | not specified | not specified |
| Compatible Material | PETG | PLA | PLA | PLA | PLA | PLA | PLA | PLA | PETG | PLA | PLA | PLA | PETG | PLA | PLA |
| Features | Carbon Fiber | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | High Speed | not specified | Carbon Fiber | not specified | not specified |
| Color | 1kg Carbon Fiber Petg | Matte White | Pla Bundle-250gx8-2230181 | Peach Pink | 1kg Ruby Red | Beige (10201) | Green | Pink Red/Green Blue/Green Orange/Green Yellow | Black+black+black+black | 1kg Matte Rainbow | Rose Ouartz | Matte Rainbow Gradient | 1kg Petg-cf10 Black (Hex Code: #000000 ) | Matte Rainbow Candy 3 | Terracotta |
| Size | 1KG | 1KG | 1.75Mm | 1KG | 1.75Mm | 1.75mm Refill (No Spool) | 1KG | 1.75Mm | Petg Refill | 1.75Mm | Matte PLA | 1KG | PETG | Matte PLA | 1.75Mm |
| Finish | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte | Matte |
| Color Effect | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Rainbow | not specified | Rainbow | Rainbow | Rainbow | not specified | Rainbow | not specified |
| Weight | 2.2 pounds | 2.2 pounds | 5 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 8.82 pounds | 2.2 pounds | 1.1 pounds | 2.2 pounds | 2.2 pounds | 2.98 pounds | 2.2 pounds |
| Dimensions | not specified | 8.78 × 2.95 × 8.23 inches | not specified | not specified | not specified | 8.27 × 8.66 × 2.95 inches | not specified | 8.46 × 8.07 × 2.75 inches | 7.28 × 7.28 × 10 inches | 3.29 × 0.99 × 3.29 inches | 7.8 × 0.31 × 2.5 inches | not specified | not specified | not specified | not specified |
| Model | 3D Printer Filament Carbon Fiber PETG | UK-MATTEPLA17511 | BeginnerSeries | ePLA-Matte-P175TP1KG-US | not specified | 47928-R | FR-PLAYG-GN-1KG | NEW-3DMATBUN | SUNLU Refill PETG Filament | CR | not specified | 3D Printer Filament | SUNLU Carbon Fiber PETG 3D Filament | not specified | 3DMETC |
If you also need hardware, see the best matte black deadbolts for spec-based comparisons.
How to Select Matte 3D Printing Filament
-
Compare Dimensional Tolerance Ratings
Check the dimensional accuracy specification before you buy any matte filament. Standard desktop extruders depend on uniform filament diameter to deliver consistent volumetric flow through the nozzle. Formulations rated at ±0.02 mm, such as ELEGOO Matte PLA Filament, offer tighter extrusion control than options rated at ±0.03 mm. This tighter tolerance reduces the risk of flow inconsistencies, under-extrusion gaps, and sudden hotend clogs. If your printer uses standard direct-drive or Bowden toolheads without automated flow calibration, prioritize materials with tighter dimensional specs to keep your outer wall surfaces smooth and uniform.
-
Verify Spool Format Requirements
Look closely at whether a listing includes a physical spool or comes as a spool-less refill. Products like the Bambu Lab Matte PLA 1kg Refill provide raw filament coiled without an inner plastic core. These refills reduce plastic packaging waste, but you must mount them onto compatible reusable master spools before feeding them into your printer. If you attempt to print a refill directly without a supporting spool frame, the coiled line will tangle and jam your feeder. Only choose coreless refills if you already own dedicated reusable hardware.
-
Select Spool Weight by Project
Evaluate the spool capacity against the volume of your planned prints. Standard rolls contain 1kg of filament, which fits routine part manufacturing and large single-color models. However, smaller bundles like the YOOPAI Matte PLA 250g Bundle provide multiple small rolls instead of a single spool. Smaller multi-packs suit users printing miniature figures, color accents, or multi-part decorative assemblies where you do not need an entire kilogram of a single shade. Choosing smaller spools also helps prevent leftover filament from sitting open in ambient room humidity between occasional printing sessions.
-
Check Color Transition Cycles
Examine how gradient filaments transition between shades before choosing a multi-color matte roll. Gradient filaments change colors along the length of the strand. For example, LOVOON Matte Rainbow PLA features a five-color shift across a 150-gram cycle length. If you print small models, a long cycle will show only a single color transition on your finished part. Pick fast-transition gradients or coextrusion filaments for compact prints so you see multiple hues. Reserve filaments with extended gradient cycles for large models with enough mass to expose the entire multi-color spectrum.
-
Match High Speed Ratings
Check the maximum print speed rating if you run a high-speed CoreXY printer. Standard matte filaments can develop flow resistance or matte sheen inconsistencies when extruded at high speeds. High-speed options, such as iSANMATE Matte Tri Colors PLA, specify extrusion rates up to 600 mm/s. This flow capacity ensures the filament melts thoroughly inside high-flow hotends without causing feeder slippage. If your machine runs at standard velocities below 100 mm/s, ordinary matte PLA functions reliably. Choose high-speed formulations only if your hardware routinely operates at elevated linear print speeds.
-
Review Multi Material Feeder Limits
Confirm whether your multi-material system accepts composite blends before loading reinforced matte filament. Materials like SUNLU 1kg Matte Black PETG-CF contain rigid carbon fibers that can wear down internal feeder components and jam automated filament routing systems. The abrasive nature of carbon-fiber strands can also cause premature wear on narrow multiplexer tubes. If you rely on an automated multi-material feeder, check the filament specifications for feeder restrictions. Use standard, non-reinforced matte PLA for automated color-switching systems, and feed abrasive composite filaments directly from an external spool holder instead.
Frequently asked questions
Can you print filament refills without an existing spool?
No, you cannot feed spoolless refills directly into an extruder. Refill options like the Bambu Lab Matte PLA Refill and SUNLU Matte PETG Refill eliminate single-use plastic spools, but they require compatible reusable master spools. You must assemble the coil onto a reusable spool core before loading the filament into your printer or material management system.
How fast can high-speed matte filament print on desktop machines?
Certain specialized matte filaments can support speeds up to 600 mm/s. High-speed options, such as iSANMATE Matte Tri Colors PLA, list extrusion rates reaching 600 mm/s alongside a tight ±0.03 mm dimensional tolerance. Standard matte filaments generally extrude at lower speeds, so you should verify your printer hotend flow rate before attempting maximum acceleration settings on decorative models.
Can carbon fiber matte filaments run through multi-color feeder systems?
Manufacturer specifications advise against using abrasive carbon-filled filaments in automated multi-color feeding systems. Formulations such as SUNLU Matte Black PETG-CF contain abrasive carbon fiber reinforcement that rules out automated multi-material units. These filaments also demand filament drying equipment prior to extrusion, as well as hardened printer hardware capable of sustaining 250°C hotend temperatures for functional mechanical builds.
How do matte rainbow gradient filaments change color during a print?
Gradient filaments cycle through distinct colors at set filament weight intervals during continuous extrusion. For example, LOVOON Matte Rainbow PLA features a five-color pastel transition across a 150g cycle. To see the full color shift, you need to print models with enough volume or infill to consume that length of filament, unlike dual or tri-color coextrusion filaments that show multiple shades simultaneously.
What options are available if you want small quantities of matte filament?
You can select bundled mini-spool packs instead of standard 1kg reels. Options such as the YOOPAI Matte PLA bundle provide eight 250g spools, while AMOLEN offers a rainbow pack with four 200g reels. These smaller spools let you access multiple matte colors for small accents or decorative multi-color projects without storing multiple full-sized one-kilogram spools around your workspace.
Does matte PLA require different heated bed settings than standard PLA?
Most matte PLA filaments operate on standard open-frame bed settings, but specific blends require higher thermal output. For instance, CHCKX Matte Rainbow PLA specifies higher print bed heat than standard PLA to maintain proper layer adhesion. Always verify the manufacturer bed temperature range for each unique matte formulation before you initiate large prints to avoid base warping or detachment.
What eco-friendly packaging options exist for matte 3D printing filaments?
Manufacturers offer recyclable materials and spoolless refills to minimize workshop plastic waste. Brands like eSUN supply matte PLA on recyclable paper reels instead of petroleum-based spools. Alternatively, spoolless options from SUNLU and Bambu Lab provide coiled filament refills designed for reusable spools, eliminating disposable plastic rims while maintaining standard extrusion reliability across your builds.