Best Black 3d Printing Filaments: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the right black 3d printing filament depends on matching material properties, dimensional tolerances, and printing speeds to your project requirements. We compared 15 options based strictly on the specifications published on their product listings.
The SUNLU 1.75mm Black PLA Filament 1kg takes the top spot because its +/- 0.02mm dimensional tolerance and 50 to 100mm/s speed range deliver dependable extrusion for everyday standard-speed FDM printing. This guide helps you identify the best spool size, material type, and speed rating for your hardware.
Quick picks
The best fit for you
- You need reliable PLA for everyday standard-speed printing SUNLU 1.75mm Black PLA Filament 1kg Tight +/- 0.02mm tolerance and a 50 to 100mm/s speed profile deliver dependable baseline extrusion.
- You want fast PLA output up to 500mm/s Flashforge High Speed PLA Filament 1kg Documented 500mm/s print speed rating supports high-flow output on high-speed hardware.
- You want non-reflective display prints without layer lines SUNLU Matte PLA Filament 1.75mm 1kg A matte surface finish minimizes glare and conceals visible print lines.
- You need UV-resistant black filament for exterior parts iSANMATE 1.75mm Black ASA Filament 1kg ASA material specification provides dedicated UV stability for exterior applications.
Our 15 picks
SUNLU 1.75mm Black PLA Filament 1kg
Best for: everyday standard-speed FDM printing
- Color
- Black (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 100mm/s
- Dimensional Accuracy
- +/- 0.02mm
This is a 1kg spool of black 1.75mm PLA filament designed for standard FDM 3D printers. It features a tight +/- 0.02mm dimensional accuracy and a spool with a 2.20-inch hub diameter. With recommended printing speeds between 50 and 100mm/s, it suits you if you need consistent, everyday black prints with reliable feeding at standard printing temperatures of 200 to 230°C.
Pros
- Tight +/- 0.02mm dimensional accuracy
- Moderate 200-230°C nozzle and 50-65°C bed temperature ranges
- Spool designed with neat winding to prevent tangles
- Standard 2.20-inch hub hole fits common spool holders
Cons
- Recommended print speed limited to 50-100mm/s
- Standard PLA lacks outdoor UV or high temperature resistance
Good fit if
- You print standard FDM models at speeds up to 100mm/s.
- You require tight +/- 0.02mm dimensional accuracy for 1.75mm setups.
- You use spool holders compatible with a 2.20-inch hub diameter.
Skip if
- You run high-speed print profiles exceeding 100mm/s.
- You require weather-resistant materials for outdoor functional parts.
Verdict: SUNLU 1kg Black PLA Filament provides tight +/- 0.02mm dimensional tolerance and standard thermal specs for reliable FDM printing. Its 50 to 100mm/s speed range makes it a dependable baseline choice for general-purpose black prints.
ELEGOO 1.75mm Black PLA Filament 1kg
Best for: everyday glossy black FDM 3D printing
- Color
- Black (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02 mm
- Surface Finish
- glossy
This 1 kg spool of ELEGOO black 1.75mm PLA filament gives you a reliable material for standard FDM printing. It features a tight +/- 0.02 mm dimensional accuracy and a glossy surface finish. The spool uses a larger inner diameter for smoother feeding and comes vacuum sealed to keep moisture out. It suits you if you need a dependable, low-warp black filament for everyday prototypes or decorative parts.
Pros
- +/- 0.02 mm dimensional tolerance
- Mechanically wound spool with larger inner diameter design
- Vacuum-sealed packaging prevents moisture absorption
- Low warp and shrinkage with a glossy surface finish
Cons
- Standard PLA formulation without high-speed print speed ratings
- Glossy finish rather than a matte surface texture
Good fit if
- You need standard 1.75mm black PLA with +/- 0.02 mm dimensional accuracy.
- You want a spool designed with a larger inner diameter for easy feeding.
- You prefer prints with a glossy black surface finish.
Skip if
- You require a matte black or non-reflective surface finish.
- You need weather resistance or higher temperature tolerance than standard PLA provides.
Verdict: ELEGOO 1.75mm Black PLA Filament 1kg delivers tight dimensional accuracy and neat spool winding for standard FDM printing. It provides a dependable choice whenever your project calls for an everyday glossy black finish.
ELEGOO PLA Plus 1.75mm Filament (1kg)
Best for: functional black prints needing high impact strength
- Color
- Black (what this guide is about)
- Material Type
- PLA Plus
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Glossy
This is a 1kg spool of black 1.75mm PLA Plus filament designed for standard FDM 3D printers. It features a +/- 0.02mm dimensional tolerance and mechanical winding to avoid snags during feeding. The formulation targets higher impact resistance and lower shrinkage than standard PLA while producing a glossy surface. It suits you if you want a reliable black material for functional brackets, mechanical prototypes, or daily projects requiring extra durability.
Pros
- Strict dimensional accuracy of +/- 0.02mm
- Enhanced toughness and impact strength over standard PLA
- Neat mechanical winding reduces tangles and snaps
- Vacuum-sealed packaging protects against moisture and dust
Cons
- Specific printing and bed temperature ranges are omitted from the specs
- Glossy finish is not suitable if you need a non-reflective matte surface
Good fit if
- You need a black 1.75mm filament with high impact resistance for functional parts.
- You want consistent +/- 0.02mm dimensional accuracy to prevent extrusion clogging.
Skip if
- You require a matte black appearance rather than a glossy exterior.
- You need exact extruder temperature numbers stated on the manufacturer data sheet.
Verdict: ELEGOO PLA Plus 1.75mm Black Filament (1kg) provides precise +/- 0.02mm tolerances and enhanced impact strength for your everyday functional printing tasks.
OVERTURE High Speed Black PETG 1kg
Best for: high-speed functional mechanical printing
- Color
- Black (what this guide is about)
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 300mm/s
- Dimensional Accuracy
- +/- 0.02mm
This is a 1kg spool of black 1.75mm PETG filament engineered for rapid printing. It supports print speeds from 30 up to 300mm/s with a tight dimensional tolerance of +/- 0.02mm. Running it requires nozzle temperatures between 230°C and 260°C and a heated bed between 65°C and 70°C. If you need functional, impact-resistant black mechanical parts produced quickly on high-speed machines, this material delivers consistent extrusion.
Pros
- Rated for print speeds up to 300mm/s
- Tight dimensional tolerance of +/- 0.02mm
- Neat winding design compatible with multi-material systems like AMS
- Vacuum-sealed and pre-dried packaging
Cons
- Requires a heated print bed reaching 65°C to 70°C
- Maximum rated speed is capped at 300mm/s
- Requires hotend temperatures between 230°C and 260°C
Good fit if
- You run printers operating at speeds up to 300mm/s.
- You need dimensional precision within +/- 0.02mm for mechanical parts.
- You use an AMS or multi-material system requiring neat spool winding.
Skip if
- You use a 3D printer without a heated build plate.
- You run ultra-speed print profiles exceeding 300mm/s.
Verdict: OVERTURE High Speed Black PETG 1kg pairs 300mm/s speed capability with a +/- 0.02mm diameter tolerance. It provides consistent layer adhesion and heat resistance for functional prototyping.
ELEGOO Black PETG Filament 2kg
Best for: extended functional and mechanical print jobs
- Color
- Black (what this guide is about)
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 2KG
- Dimensional Accuracy
- +/- 0.02 mm
- Weight
- 4.41 pounds
This is a 2kg spool of black 1.75mm PETG filament from ELEGOO designed for standard FDM printers. It features a dimensional tolerance of +/- 0.02 mm and mechanical winding to prevent tangles. The 4.4-pound package offers double the capacity of standard 1kg rolls, suiting you if you run extended mechanical prints, brackets, or functional components without stopping to change filament.
Pros
- 2kg spool capacity provides double the material of standard 1kg rolls
- +/- 0.02 mm dimensional diameter accuracy
- Neat mechanical winding reduces snap and tangling risks
- Pre-dried and vacuum-sealed for moisture protection
Cons
- Heavier 2kg spool may require an external or heavy-duty spool holder
- Must be dried before reuse once unpacked to prevent moisture bubbling
Good fit if
- You want 2kg of continuous filament for large or multi-part print jobs
- You print functional parts like clamps, brackets, and printer components
Skip if
- You need a standard 1kg spool size
- Your printer setup cannot support or feed a 4.4-pound spool
Verdict: ELEGOO Black PETG Filament 2kg offers double the material of standard spools with +/- 0.02 mm accuracy for long, functional jobs. It suits you if you need durable PETG prints without mid-project roll swaps.
Bambu Lab 1.75mm Black PLA Refill
Best for: AMS users with reusable spools
- Color
- Black (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.03mm
- Dimensions
- 8.27 × 8.66 × 2.95 inches
This is a 1-kilogram spool-less refill of 1.75mm black PLA filament designed for reusable spools. It features a specified dimensional accuracy of plus or minus 0.03 millimeters and includes an integrated RFID tag for automatic material identification. If you operate an AMS system or Bambu Studio setup, this format supplies standard black PLA while eliminating single-use plastic spool waste.
Pros
- Integrated RFID tag automatically configures print settings in Bambu Studio
- Dimensional tolerance specified at +/- 0.03 mm
- Refill design works with reusable spools to minimize waste
- AMS-compatible material formulation
Cons
- Does not include an empty spool assembly
- Automatic material detection requires AMS hardware
Good fit if
- You already have a compatible reusable spool ready to load.
- You use an AMS system to read material RFID tags.
- You want standard 1.75mm black PLA with reduced packaging waste.
Skip if
- You require an included spool to mount directly to your printer.
- You do not use an AMS setup and gain no benefit from integrated RFID.
Verdict: Bambu Lab 1.75mm Black PLA Refill provides tight dimensional accuracy and automatic AMS configuration for existing reusable spools. It offers a straightforward black PLA refill option for setups that do not need additional plastic spool hardware.
ELEGOO Rapid PETG 1.75mm Black 10KG
Best for: high-volume fast functional printing
- Color
- Black (what this guide is about)
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 10KG
- Max Print Speed
- 600 mm/s
- Features
- High Speed
This is a 10-spool bulk pack of 1.75 mm black PETG filament totaling roughly 22 pounds. It supports print speeds up to 600 mm/s on compatible high-speed machines. The material offers low shrinkage, minimal warping, and high impact resistance for functional parts. You will find it suits high-volume printing operations that demand mechanical strength alongside fast extrusion.
Pros
- Supports print speeds up to 600 mm/s
- Bulk package contains ten 1 kg spools
- Mechanical winding reduces tangling
- Combines impact resistance with low shrinkage
Cons
- Requires substantial storage space for ten spools
- Requires drying before reuse after opening
Good fit if
- You run high-speed printers and need high-volume black filament.
- You have dedicated storage space for ten 1 kg spools.
Skip if
- You only print occasional parts and need a single spool.
- You lack filament drying equipment for opened spools.
Verdict: ELEGOO Rapid PETG 1.75mm Black Filament (10 kg) delivers high-speed capability and mechanical durability in a large 10-spool package. It suits busy production setups using fast modern hardware.
SUNLU Matte PLA Filament 1.75mm 1kg
Best for: hiding layer lines on display models
- Color
- Black (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 100mm/s
- Dimensional Accuracy
- +/- 0.02mm
SUNLU Matte PLA Filament 1.75mm 1kg gives your prints a low-gloss, frosted black finish designed to hide visible layer lines. It features a +/- 0.02mm dimensional tolerance for reliable feeding, along with a standard 1-kilogram spool size. Operating between 200°C and 230°C at print speeds from 50 to 100mm/s, it suits you if you need clean display models, decorative parts, or prototypes without a reflective plastic shine.
Pros
- Frosted matte texture conceals layer lines
- Tight +/- 0.02mm dimensional accuracy
- Standard 200°C to 230°C nozzle temperature range
- Spool hub hole diameter of 2.20 inches fits common holders
Cons
- Recommended print speed capped at 100mm/s
- Standard PLA composition lacks high heat resistance
Good fit if
- You want a non-reflective, frosted black surface that hides layer steps.
- You print at moderate speeds between 50 and 100mm/s.
- You need tight +/- 0.02mm diameter consistency for reliable extrusion.
Skip if
- You run high-speed print profiles above 100mm/s.
- You need outdoor UV tolerance or high heat resistance.
Verdict: SUNLU Matte PLA Filament 1.75mm 1kg delivers a non-reflective black surface with reliable +/- 0.02mm tolerances for standard-speed printing. It is an effective choice when you want visual parts without glossy layer lines.
YOOPAI 1.75mm Black PETG Filament 1kg
Best for: glossy black prints requiring heated beds
- Color
- Black (what this guide is about)
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.03mm
- Dimensions
- 4.33 × 4.33 × 4.33 inches
This 1kg spool from YOOPAI gives you 1.75mm black PETG filament designed for FDM 3D printers. It features a dimensional accuracy tolerance of +/- 0.03mm and operates at nozzle temperatures between 220°C and 250°C. You will need a heated bed capable of reaching 70°C to 80°C to run it properly. It suits makers who need tough, glossy black parts with standard mechanical winding.
Pros
- +/- 0.03mm dimensional accuracy tolerance
- Operates at 220°C to 250°C nozzle temperatures
- Mechanical winding reduces line tangling and breakage
- Vacuum-sealed packaging to protect against moisture
Cons
- Requires a heated print bed running between 70°C and 80°C
- Higher printing temperature range than standard PLA
Good fit if
- You need a glossy black finish with +/- 0.03mm diameter tolerance.
- You have a 3D printer bed that reliably maintains 70°C to 80°C.
Skip if
- You use a 3D printer without a heated print bed.
- You prefer a matte black finish on finished parts.
Verdict: YOOPAI 1.75mm Black PETG Filament 1kg delivers standard +/- 0.03mm tolerance and mechanically wound black PETG for printers equipped with 70°C to 80°C heated beds.
Polymaker 1.75mm High Speed Black PETG Filament (1kg)
Best for: fast functional printing with high impact resistance
- Color
- Black (what this guide is about)
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 500mm/s
- Dimensions
- 7.87 × 7.87 × 2.36 inches
View on Amazon: Polymaker 1.75mm High Speed Black PETG Filament (1kg)
This is a 1kg spool of 1.75mm black PETG filament designed for fast extrusion. It operates at print speeds up to 500mm/s, requiring nozzle temperatures between 240°C and 260°C and bed temperatures from 60°C to 70°C. You get the impact resistance and mechanical toughness of PETG combined with smooth feed flow. It suits you if you run high-speed FDM hardware for functional black prototypes or stress-bearing parts.
Pros
- Supports print speeds up to 500mm/s
- High impact resistance against drops and sudden mechanical stress
- Operates across a 20% to 60% cooling fan range
- Comes backed by a 6-month quality assurance period
Cons
- Requires high nozzle temperatures between 240°C and 260°C
- Requires a heated bed reaching 60°C to 70°C
- Needs dedicated dry storage away from moisture and heat
Good fit if
- You run a high-speed 1.75mm FDM printer capable of speeds up to 500mm/s.
- You need impact-resistant black components that tolerate bending and mechanical wear.
- Your printer hotend reliably reaches and maintains 240°C to 260°C.
Skip if
- You use a 3D printer lacking a heated print bed.
- Your extruder hotend cannot safely operate above 230°C.
Verdict: Polymaker 1.75mm High Speed Black PETG Filament (1kg) offers durable, impact-resistant mechanical strength at speeds up to 500mm/s. It delivers reliable extrusion for functional parts when paired with a hotend capable of reaching 260°C.
ELEGOO PLA+ 1.75mm Black Filament 1KG
Best for: everyday functional prints needing enhanced toughness
- Color
- Black (what this guide is about)
- Material Type
- PLA+
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02 mm
- Surface Finish
- Glossy
This 1kg spool of ELEGOO PLA+ delivers 1.75 mm black filament engineered for higher impact strength and toughness than basic PLA. It features a tight dimensional tolerance of +/- 0.02 mm, mechanical spool winding, and dry vacuum sealing. If you run a standard 1.75 mm FDM 3D printer and need dependable black parts with a glossy finish and lower warping, this spool suits your everyday functional builds.
Pros
- Diameter tolerance held to +/- 0.02 mm
- Enhanced toughness and impact strength over standard PLA
- Mechanical winding designed to reduce tangles
- Factory dried and vacuum sealed against moisture
Cons
- No maximum print speed rating specified in published data
- Produces a glossy surface rather than a matte finish
- No integrated RFID spool detection tag
Good fit if
- You need 1.75 mm black filament with a consistent +/- 0.02 mm diameter tolerance.
- You want higher impact resistance and mechanical strength than standard PLA provides.
- You prefer neat mechanical winding to prevent mid-print snags on standard FDM setups.
Skip if
- You require a matte black surface finish instead of a glossy one.
- You need an outdoor-rated material such as ASA for UV exposure resistance.
Verdict: ELEGOO PLA+ 1.75mm Black Filament (1kg) provides reliable +/- 0.02 mm dimensional accuracy and improved impact toughness over basic PLA. It is a dependable choice for standard FDM printing when you require glossy black mechanical prints.
GIANTARM 1.75mm Black PLA Filament 1kg
Best for: everyday printing requiring +/- 0.03mm diameter tolerance
- Color
- Black (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.03mm
- Dimensions
- 2.76 × 8.66 × 8.66 inches
This is a 1kg spool of 1.75mm black PLA filament wound on a standard 7.8-inch spool. It specifies a dimensional tolerance of +/- 0.03mm and prints at nozzle temperatures between 190°C and 215°C with a heated bed between 40°C and 60°C. If you need standard black PLA with moderate extrusion temperatures and a resealable storage bag for basic desktop 3D printing projects, this fits your regular printing setup.
Pros
- +/- 0.03mm dimensional accuracy specification
- Extrusion temperature range between 190°C and 215°C
- Ships vacuum-sealed with desiccant in a resealable bag
- 2.3-inch spool hub diameter fits standard spool holders
Cons
- Lacks high-speed print speed ratings
- No integrated RFID tag for automated filament tracking systems
Good fit if
- You print standard PLA models within a 190°C to 215°C temperature window.
- You want a spool supplied with a reusable storage bag for moisture protection.
Skip if
- You need filaments rated for high-speed printing platforms.
- You require weather-resistant materials like ASA or PETG for outdoor use.
Verdict: GIANTARM 1.75mm Black PLA Filament 1kg provides documented +/- 0.03mm diameter consistency for standard desktop hardware. Its moderate bed and nozzle temperature requirements make it a straightforward choice for everyday PLA parts.
Flashforge High Speed PLA Filament 1kg
Best for: High-speed printing up to 500 mm/s
- Color
- Black (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 500mm/s
- Dimensional Accuracy
- +/- 0.02 mm
Flashforge High Speed PLA 1.75mm 1kg is a standard black 3D printing filament built for rapid production. It supports print speeds up to 500 mm/s with consistent melting and flow. The spool features a 1.75 mm diameter with +/- 0.02 mm dimensional tolerance and undergoes 24 hours of factory pre-drying. This material suits you if you run modern fast printers and need clean extrusion on everyday black PLA models.
Pros
- Supports print speeds up to 500 mm/s
- Dimensional tolerance of +/- 0.02 mm
- Pre-dried for 24 hours before factory packaging
- Wound to prevent tangles and feeding blocks
Cons
- No recommended nozzle or bed temperatures listed in data
- No UV or outdoor weather resistance ratings
- Available only as an individual 1 kg spool
Good fit if
- You print at rapid speeds up to 500 mm/s.
- You want pre-dried filament with +/- 0.02 mm tolerance.
- You need a dedicated 1 kg spool of standard black PLA.
Skip if
- You require UV-resistant filament for outdoor environments.
- You prefer buying filament in multi-kilogram bulk packs.
Verdict: Flashforge High Speed PLA 1.75mm 1kg delivers steady flow at speeds up to 500 mm/s with strict +/- 0.02 mm dimensional accuracy. It gives you dependable extrusion for fast everyday printing tasks.
FLASHFORGE Black PLA 1.75mm Filament (1kg)
Best for: everyday precision FDM 3D printing projects
- Color
- Black (what this guide is about)
- Material Type
- PLA PRO
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Printing Technology
- FDM
This 1kg spool of black 1.75mm PLA filament from FLASHFORGE provides a tight dimensional accuracy tolerance of +/- 0.02mm. It is vacuum-sealed with desiccant after undergoing 24 hours of pre-packaging drying. The filament is wound automatically to minimize tangling across standard FDM 3D printers. If you need a reliable black filament for detailed models or functional parts that require minimal shrinkage, this spool offers precise extrusion dimensions.
Pros
- +/- 0.02mm dimensional accuracy tolerance
- Dried for 24 hours and vacuum-sealed with desiccant
- Automatic winding with manual inspection to reduce tangles
- Two-month warranty with 30-day return coverage
Cons
- No printing temperature guidelines listed in the specifications
- Single 1kg spool format with no multi-pack option listed
Good fit if
- You need +/- 0.02mm dimensional tolerance for fine print details.
- You prioritize filament dried and sealed with desiccant straight from packaging.
- You build functional parts that require minimal shrinkage.
Skip if
- You require multi-kilogram bulk bundles for high-volume jobs.
- You prefer filaments that supply listed nozzle and bed temperature specs.
Verdict: FLASHFORGE Black PLA 1.75mm Filament (1kg) provides +/- 0.02mm tolerance and pre-dried packaging for standard FDM printing. It serves users seeking dependable dimensional control and low shrinkage for functional prints.
iSANMATE 1.75mm Black ASA Filament 1kg
Best for: UV-resistant outdoor functional parts
- Color
- Black (what this guide is about)
- Material Type
- ASA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 100mm/s
- Dimensional Accuracy
- +/- 0.02mm
The iSANMATE 1.75mm Black ASA Filament 1kg provides weather and UV resistance for outdoor mechanical parts. This spool features a dimensional accuracy of +/- 0.02mm and requires an extrusion temperature between 240°C and 270°C, alongside bed heat from 80°C to 100°C. You will need an enclosed printer setup with bed adhesive to handle its thermal demands. It suits you if you produce functional outdoor parts at speeds up to 100mm/s.
Pros
- Dimensional accuracy specified at +/- 0.02mm
- Formulated for UV, weather, and thermal resistance in outdoor functional parts
- Vacuum-sealed packaging includes desiccant
- Broad extrusion temperature range of 240°C to 270°C
Cons
- Requires high heated bed temperatures between 80°C and 100°C
- Manufacturer specifies an enclosed environment and bed glue for printing
- Printing speeds capped at a maximum of 100mm/s
Good fit if
- You need UV and weather resistance for outdoor components.
- You own a 3D printer with an enclosure and a 100°C capable bed.
- You require tight +/- 0.02mm dimensional accuracy on functional parts.
Skip if
- You print on an open-frame machine without a thermal enclosure.
- You run high-speed print profiles above 100mm/s.
- You have a hotend that cannot safely reach 240°C to 270°C.
Verdict: iSANMATE 1.75mm Black ASA Filament 1kg delivers the UV stability and mechanical resilience required for exterior functional components. You will need high bed heat and an enclosed print chamber to satisfy its processing specifications.
Specifications side by side
| Spec | SUNLU 1.75mm Black PLA Filament 1kg | ELEGOO 1.75mm Black PLA Filament 1kg | ELEGOO PLA Plus 1.75mm Filament (1kg) | OVERTURE High Speed Black PETG 1kg | ELEGOO Black PETG Filament 2kg | Bambu Lab 1.75mm Black PLA Refill | ELEGOO Rapid PETG 1.75mm Black 10KG | SUNLU Matte PLA Filament 1.75mm 1kg | YOOPAI 1.75mm Black PETG Filament 1kg | Polymaker 1.75mm High Speed Black PETG Filament (1kg) | ELEGOO PLA+ 1.75mm Black Filament 1KG | GIANTARM 1.75mm Black PLA Filament 1kg | Flashforge High Speed PLA Filament 1kg | FLASHFORGE Black PLA 1.75mm Filament (1kg) | iSANMATE 1.75mm Black ASA Filament 1kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material Type | PLA | PLA | PLA Plus | PETG | PETG | PLA | PETG | PLA | PETG | PETG | PLA+ | PLA | PLA | PLA PRO | ASA |
| Filament Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
| Net Weight | 1KG | 1KG | 1KG | 1kg | 2KG | 1kg | 10KG | 1KG | 1KG | 1kg | 1KG | 1kg | 1kg | 1KG | 1kg |
| Max Print Speed | 100mm/s | not specified | not specified | 300mm/s | not specified | not specified | 600 mm/s | 100mm/s | not specified | 500mm/s | not specified | not specified | 500mm/s | not specified | 100mm/s |
| Dimensional Accuracy | +/- 0.02mm | +/- 0.02 mm | +/- 0.02mm | +/- 0.02mm | +/- 0.02 mm | +/- 0.03mm | not specified | +/- 0.02mm | +/- 0.03mm | not specified | +/- 0.02 mm | +/- 0.03mm | +/- 0.02 mm | +/- 0.02mm | +/- 0.02mm |
| Surface Finish | not specified | glossy | Glossy | not specified | not specified | not specified | not specified | Matte | not specified | not specified | Glossy | not specified | not specified | not specified | not specified |
| Printing Technology | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | FDM | not specified |
| Compatible Material | PLA | PLA | not specified | PETG | PETG | PLA | PETG | PLA | PETG | PETG | PLA | PLA | PLA | PLA | ASA |
| Print Speed | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 500mm/s | not specified | not specified |
| Features | not specified | not specified | not specified | High Speed | not specified | not specified | High Speed | not specified | not specified | not specified | not specified | not specified | High Speed | not specified | not specified |
| Color | Black | Black | Black | Black | Black | Black | Black | Black | Black | Black | Black | Black | Black | Black | Black |
| Size | 1KG | 1KG | 1KG | 1kg (1-pack) | 2KG | 1.75mm Refill (No Spool) | 35.27 Ounce (Pack of 10) | 1KG | 1.75mm 1kg | 1kg (2.2 lb) | 1KG | 1KG | 1kg High Speed PLA | PLA | 1X 1KG |
| Finish | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Matte | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Application | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Functional Parts |
| Dimensions | 8.66 × 8.66 × 3.15 inches | not specified | 8.2 × 8.2 × 2.7 inches | not specified | not specified | 8.27 × 8.66 × 2.95 inches | not specified | 7.87 × 2.56 × 7.87 inches | 4.33 × 4.33 × 4.33 inches | 7.87 × 7.87 × 2.36 inches | not specified | 2.76 × 8.66 × 8.66 inches | not specified | not specified | 1 × 1 × 1 inches |
| Weight | 2.21 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 4.41 pounds | 2.2 pounds | 22 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds |
| Model | 3D Printer Filament PLA Filament 1.75mm | not specified | US-EL-3D-PP01 | OVPETG175 | not specified | 47923-R | not specified | FR-PLAYG-BK-1KG | P-PETG-Black | PB05001 | CA-EL-3DF-PPB0417 | not specified | High Speed | FF-Pro | ASA-Black |
If you need matching exterior hardware for your maker space, compare the best black deadbolts to review ANSI grade ratings and backset dimensions.
Selecting the Right Black Filament Spool
-
Choose Surface Finish Spec
Check the finish specification when choosing a black filament for visual presentation. Standard PLA and PETG materials produce a naturally glossy outer surface that reflects direct light and highlights individual layer lines. If you want to obscure extrusion layers on display models, check for an explicit matte specification. Products like the SUNLU Matte PLA Filament 1.75mm 1kg provide a non-reflective black exterior. Selecting a matte finish reduces surface glare on detailed parts without requiring post-processing or sanding steps.
-
Verify Spool Hardware Configuration
Inspect the packaging type before purchasing to ensure it matches your spool holder setup. Standard filaments arrive wound around disposable plastic reels that mount directly onto standard printer spindles. In contrast, refill options ship without plastic spools to reduce material waste. If you already own compatible master spools or multi-material systems, select a spoolless option like the Bambu Lab 1.75mm Black PLA Refill. Confirm your spool system can securely lock the raw coil in place before unwrapping to avoid tangles and feeding jams during extrusion.
-
Match Spool Capacity to Runtime
Review the total spool weight against the length of your planned printing jobs. Standard single spools weigh 1kg, which fits most desktop brackets and standard runs. If you print large mechanical enclosures or high-volume batches, continuous printing avoids running out of material mid-layer. Selecting an extended capacity roll like the ELEGOO Black PETG Filament 2kg gives you double the material on a single reel. Verify your printer spool holder, clearance, and feed motor can accommodate heavier spools before loading larger spools on your machine.
-
Check Enhanced Impact Ratings
Examine material toughness specs if your black prints require mechanical durability rather than simple visual utility. Standard PLA delivers rigid structure and easy printing, but it remains brittle under sudden loads or mechanical impacts. When your components must survive drops, snap fits, or functional stress, evaluate modified formulations. Choosing a material like the ELEGOO PLA Plus 1.75mm Filament (1kg) provides enhanced impact strength over standard PLA. This extra durability helps functional brackets and snap-fit assemblies withstand mechanical forces while retaining regular PLA print settings.
-
Confirm Heated Bed Capabilities
Check your 3D printer heated build plate temperature limits against the filament thermal specifications. Basic PLA filaments adhere to unheated or moderately warm surfaces, but technical polymers require sustained bed heat to prevent bottom warping and detachment. For instance, the YOOPAI 1.75mm Black PETG Filament 1kg specifies a bed temperature range between 70°C and 80°C. You must verify your machine's heated bed can reliably reach and maintain these elevated temperatures before selecting PETG materials for mechanical functional models.
-
Compare Diameter Tolerance Ratings
Look closely at the documented diameter tolerance on the filament spec sheet to maintain consistent extrusion volume. Desktop FDM hardware relies on uniform 1.75mm diameter to calculate flow rates accurately. Options like the GIANTARM 1.75mm Black PLA Filament 1kg list a +/- 0.03mm tolerance, which works well for standard daily prints. If your parts demand tighter seam alignments or precise mechanical assemblies, look for tighter +/- 0.02mm tolerance ratings. Tighter diameter consistency prevents unexpected under-extrusion or over-extrusion banding across long print runs.
Frequently asked questions
Which black filament works best if you want to use reusable spools?
The Bambu Lab 1.75mm Black PLA Refill is designed specifically for reusable spool systems. It arrives without a plastic spool core, allowing you to mount it directly onto compatible hardware to reduce plastic waste. This refill also supports automated material systems by providing native configuration profiles, maintaining a strict 1.75mm diameter for reliable and clean extrusion during your everyday PLA print projects.
Which black filaments can handle print speeds up to 500mm/s?
Both Flashforge High Speed PLA and Polymaker High Speed PETG support print speeds up to 500mm/s. Flashforge rates its high-speed PLA for reliable flow and +/- 0.02mm tolerance at that speed. Polymaker high-speed PETG achieves 500mm/s while delivering elevated impact resistance, though it requires your printer hotend to sustain operating temperatures up to 260°C during extrusion.
How does black PLA Plus compare to standard black PLA?
Black PLA Plus delivers increased mechanical durability and impact strength compared to standard PLA formulations. Options like ELEGOO PLA Plus and ELEGOO PLA+ maintain the standard ease of printing and tight +/- 0.02mm dimensional tolerances of conventional PLA. However, their modified polymer blend provides higher resistance to shocks and drops, making them a better choice for functional mechanical components and structural brackets.
What printer specifications do you need to run black ASA filament?
Printing black ASA requires an enclosed build chamber and a high-temperature heated bed. The iSANMATE Black ASA filament is engineered for UV-resistant outdoor functional parts, but ASA material contracts rapidly as it cools. You need an enclosure to maintain ambient air heat and prevent layer delamination or edge warping, along with a bed capable of reaching the elevated temperatures necessary for initial layer adhesion.
What heated bed temperature is needed for printing black PETG?
Black PETG filament generally requires a heated bed set between 70°C and 80°C. For instance, YOOPAI specifies this temperature window for its 1.75mm Black PETG to ensure dependable first-layer adhesion. Unlike PLA, which can often adhere to unheated or lower-temperature surfaces, PETG contracts enough during cooling that a dedicated heated bed is essential to stop corners from lifting off the build platform.
When should you buy a 2kg spool or bulk pack instead of 1kg?
You should choose larger spool formats when you run extended, uninterrupted print jobs or maintain high-volume production setups. The ELEGOO 2kg Black PETG roll provides twice the continuous filament length of a standard spool, preventing mid-job filament runout on large models. For continuous batch manufacturing, bulk packages like the ELEGOO Rapid PETG 10kg bundle provide multiple spools to keep high-speed machines running without frequent ordering.
What is the practical difference between +/- 0.02mm and +/- 0.03mm tolerance?
Diameter tolerance measures how consistently the filament diameter stays near 1.75mm. A +/- 0.02mm rating, found on brands like SUNLU and FLASHFORGE, guarantees minimal cross-sectional variation for predictable volumetric flow. Filaments rated at +/- 0.03mm, such as GIANTARM PLA, still perform reliably on standard desktop hardware, but tighter tolerances reduce minor flow inconsistencies that can cause subtle surface irregularities or over-extrusion on critical visual walls.