Best 3d Printing Filaments with Carbon Fiber: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing a 3d printing filament with carbon fiber increases the rigidity, dimensional stability, and heat performance of your functional prints. This guide compares 15 options strictly using specifications published on the listings.
The SUNLU Carbon Fiber PETG Filament 1kg leads the list because it combines thermal resistance up to 130°C with a tight ±0.03mm dimensional tolerance. This guide helps you decide which base polymer and fiber reinforcement match your printer hardware and project strength requirements.
Quick picks
The best fit for you
- You need heat-resistant functional parts with PETG base material SUNLU Carbon Fiber PETG Filament 1kg It provides thermal resistance up to 130°C and a tight ±0.03mm tolerance in a 1kg spool.
- You want rigid matte prints using standard PLA hardware OVERTURE Matte Carbon Fiber PLA 1kg Its carbon-reinforced PLA formulation delivers a non-reflective matte finish on standard 1.75mm setups.
- You need extreme thermal endurance for demanding structural builds Creality PPA-CF 1kg Carbon Fiber Filament Its PPA-CF composition delivers 220°C thermal endurance for high-temperature engineering applications.
- You print outdoor functional parts requiring weather resistance iSANMATE 1.75mm Carbon Fiber ASA Filament Its ASA formulation provides weather resistance paired with tight +/- 0.02mm dimensional accuracy.
- You want fast printing speeds for reinforced PETG builds Creality Hyper PETG-CF 1.75mm Filament It maintains carbon-reinforced PETG stiffness at print speeds up to 300 mm/s.
Our 15 picks
SUNLU Carbon Fiber PETG Filament 1kg
Best for: heat-resistant and impact-durable functional components
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PETG-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 150mm/s
- Dimensional Accuracy
- +/- 0.03mm
This 1kg spool from SUNLU blends PETG with 10% carbon fiber reinforcement to increase part rigidity while preserving base impact resistance. You get a heat distortion temperature of up to 130°C, a frosted matte finish, and a ±0.03mm diameter tolerance. It prints at nozzle temperatures between 240°C and 250°C with bed temperatures from 50°C to 70°C, making it suitable if you need functional outdoor parts.
Pros
- 10% carbon fiber reinforcement improves stiffness while retaining impact resistance
- High heat distortion temperature rated up to 130°C
- Tight dimensional accuracy of +/- 0.03mm on standard 1.75mm diameter
- Frosted matte finish helps hide layer lines
Cons
- Requires high nozzle temperatures between 240°C and 250°C
- Contains 10% carbon fiber fill rather than higher-density formulations
Good fit if
- You need heat-resistant functional prints rated up to 130°C.
- You want a frosted matte surface texture on outdoor components.
- You use an FDM printer compatible with 1.75mm diameter filament and bed temperatures of 50–70°C.
Skip if
- You have a hotend that cannot consistently maintain 240–250°C.
- You require carbon fiber loadings higher than 10% for extreme tensile strength.
Verdict: SUNLU Carbon Fiber PETG Filament 1kg delivers high thermal resistance up to 130°C and reliable structural rigidity for tough functional builds. Its tight ±0.03mm tolerance and clean matte finish make it an outstanding all-around composite option.
OVERTURE Matte Carbon Fiber PLA 1kg
Best for: rigid PLA prints with matte surface finish
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Surface Finish
- Matte
- Dimensions
- 3.54 × 3.15 × 1.18 inches
OVERTURE Matte Carbon Fiber PLA gives you a 1.75mm carbon fiber-infused PLA filament on a 1kg spool with a non-glossy matte finish. The added carbon fiber structure increases rigidity and impact resistance compared to standard PLA. Built using mechanical winding and continuous CCD diameter measuring, it provides reliable feed consistency. This material suits you if you need stiff PLA parts without high surface reflection.
Pros
- Carbon fiber blend provides higher stiffness and impact strength than basic PLA
- CCD diameter measuring system ensures consistent 1.75mm dimensional accuracy
- Mechanical winding reduces tangling and line breakage risks
- Matte Carbon Fiber Black finish diffuses glare and layer lines
Cons
- PLA base offers lower thermal resistance than nylon or ASA composites
- Carbon fiber reinforcement percentage is not listed in the specifications
Good fit if
- You want stiffer PLA prints with a non-reflective matte finish
- You run a standard 1.75mm filament setup
- You need mechanically wound spools to prevent snagging
Skip if
- You need high-heat or weather-resistant composite plastics like nylon or ASA
- You require a 2.85mm diameter filament
Verdict: OVERTURE Matte Carbon Fiber PLA 1kg delivers improved rigidity and a non-reflective finish for standard 1.75mm printers. It offers reliable mechanical winding and tight diameter tolerances without the complex printing requirements of engineering polymers.
SUNLU Carbon Fiber PLA Filament 1kg
Best for: stiff matte prints on standard hotends
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PLA-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Matte
SUNLU Carbon Fiber PLA Filament 1kg blends standard PLA with 15% carbon fiber reinforcement. It prints at nozzle temperatures between 190°C and 230°C alongside a heated bed set to 60°C to 80°C. You get a dimensional tolerance of ±0.02 mm on a standard 1.75 mm strand. It suits you if you want a stiff PLA with a frosted matte texture without running high hotend temperatures.
Pros
- 15% carbon fiber reinforcement adds stiffness to baseline PLA
- Works within a low 190°C to 230°C nozzle temperature range
- Diameter tolerance held to ±0.02 mm across the 1.75 mm line
- Frosted matte texture masks layer lines on finished parts
Cons
- Requires a heated print bed operating between 60°C and 80°C
- Lacks the higher heat resistance of nylon or ASA alternatives
- Spool width of 2.83 inches requires compatible spool holders
Good fit if
- You want carbon fiber rigidity without upgrading to a high-temp hotend.
- You prefer a matte, low-gloss finish on finished prints.
- You use a 1.75 mm extruder paired with a heated build plate.
Skip if
- You need parts for high-heat or UV-exposed outdoor applications.
- You operate a 3D printer without a heated bed.
Verdict: SUNLU Carbon Fiber PLA Filament 1kg delivers 15% carbon fiber reinforcement within accessible PLA printing temperatures. It provides high rigidity and a clean matte finish without demanding an all-metal high-temperature hotend.
Polymaker Fiberon PA12-CF10 Carbon Fiber Nylon
Best for: dimensionally stable high-temperature functional mechanical parts
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PA12
- Filament Diameter
- 1.75mm
- Net Weight
- 0.5kg
- Max Print Speed
- 300mm/s
- Compatible Material
- Nylon
View on Amazon: Polymaker Fiberon PA12-CF10 Carbon Fiber Nylon
This 0.5kg spool features a long-chain PA12 base reinforced with 10 percent carbon fiber. It absorbs less moisture than standard PA6 nylon blends, giving you more consistent dimensions. You need an all-metal hotend capable of 280 to 300°C and an abrasive-resistant hardened nozzle. You do not need an actively heated chamber. It suits you if you make functional fixtures or brackets requiring dimensional stability and thermal resistance.
Pros
- Lower moisture absorption than standard PA6-based filaments
- Prints on a standard 40–50°C bed without an actively heated chamber
- Achieves up to 131°C heat deflection temperature at 0.45 MPa after annealing
- Supports print speeds up to 300mm/s after calibration
Cons
- Requires high nozzle temperatures between 280°C and 300°C
- Requires an abrasive-resistant hardened nozzle and all-metal hotend
- Packaged as a 0.5kg spool rather than a standard 1kg capacity
Good fit if
- You need functional parts with lower moisture absorption than PA6 nylon.
- You possess a printer with an all-metal hotend reaching 300°C and a hardened nozzle.
- You want high-temperature carbon nylon without running an actively heated enclosure.
Skip if
- You use a standard brass nozzle or a PTFE-lined hotend capped below 280°C.
- You cannot dry filament at 100°C for 10 hours before printing.
Verdict: Polymaker Fiberon PA12-CF10 Nylon 0.5kg delivers stable dimensional performance and high heat resistance without requiring a heated enclosure. It demands capable high-temperature hardware and proper pre-print drying.
ELEGOO PAHT Carbon Fiber Filament 1KG
Best for: High-temperature mechanical gears, bearings, and structural parts
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PAHT-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Weight
- 2.2 pounds
ELEGOO PAHT-CF 1.75mm Black Filament 1kg is a high-temperature carbon fiber nylon material for enclosed FDM printers. It withstands ambient temperatures up to 194 °C and features lower water absorption than standard PA-CF. You print it at 260–300 °C hotend and 100–120 °C bed temperatures. If you need rigid, abrasion-resistant parts like gears or structural mounts that maintain dimensional accuracy under high heat, this spool fits your build setup.
Pros
- Withstands ambient temperatures up to 194 °C
- Lower water absorption rate than standard PA-CF
- High abrasion resistance and dimensional accuracy for gears and bearings
- Carbon fiber reinforcement enhances rigidity and strength
Cons
- Requires high nozzle temperatures between 260 °C and 300 °C
- Needs an enclosed printer and heated bed reaching 100–120 °C
- Requires a hardened steel nozzle of 0.4 mm or larger
Good fit if
- You own an enclosed 1.75 mm 3D printer that can reach 300 °C.
- You make functional mechanical components exposed to temperatures up to 194 °C.
- You use a hardened steel nozzle sized at 0.4 mm or above.
Skip if
- You run an open-frame 3D printer without an enclosure.
- You use standard brass nozzles prone to rapid abrasive wear.
- Your printer cannot maintain a bed temperature of 100–120 °C.
Verdict: ELEGOO PAHT-CF 1.75mm Black Filament 1kg delivers high structural stiffness and 194 °C temperature resistance for heavy-duty mechanical components. It is a capable choice if your hardware supports high nozzle and bed temperatures inside an enclosed chamber.
Flashforge 1.75mm Blue Carbon Fiber PLA
Best for: stiff blue prints on open-frame printers
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- Carbon Fiber PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Color
- Blue
This 1.75mm spool from Flashforge combines standard PLA with 10% chopped carbon fiber. It delivers a dimensional accuracy of +/- 0.02mm on a 1kg spool and runs on a standard heated bed without requiring an enclosed build chamber. You get increased rigidity, reduced shrinkage, and a distinct blue finish. It suits you if you need structural PLA prints with improved stiffness without moving to high-temperature engineering filaments.
Pros
- 10% carbon fiber blend increases rigidity and limits print shrinkage
- Tight dimensional tolerance of +/- 0.02mm
- Prints on an ordinary heated bed without an enclosure
- Pre-dried for 24 hours and vacuum-sealed with desiccant
Cons
- Lower carbon fiber content than 15% or 20% alternatives
- PLA base provides lower heat resistance than nylon or ASA composites
- Manufacturer warranty period is limited to two months
Good fit if
- You want a rigid carbon fiber composite in blue instead of standard black
- You operate an open-frame 3D printer with an ordinary heated bed
- You need +/- 0.02mm dimensional tolerance for consistent extrusion
Skip if
- You need high thermal resistance from nylon, ASA, or PPA composites
- You require a reinforcement density greater than 10% carbon fiber
Verdict: Flashforge 1.75mm Blue Carbon Fiber PLA delivers 10% fiber reinforcement and tight +/- 0.02mm tolerances for open-bed printers. It gives you enhanced part stiffness and reduced warping in a blue finish without demanding an enclosed machine.
iSANMATE 1.75mm Carbon Fiber ASA Filament
Best for: outdoor functional parts needing UV resistance
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- ASA CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 100mm/s
- Dimensional Accuracy
- +/- 0.02mm
This 1 kg spool of 1.75 mm carbon fiber reinforced ASA from iSANMATE is built for durable, outdoor functional parts. It offers dimensional accuracy of +/- 0.02 mm and withstands UV exposure and temperature swings. You will need a capable setup, as it prints at 240°C to 270°C with bed temperatures between 80°C and 100°C, ideally inside an enclosure. It suits makers engineering tough components that face real-world weather.
Pros
- Tolerances held within +/- 0.02 mm dimensional accuracy
- Formulated for UV, weather, and thermal resistance
- Supports print speeds from 30 mm/s up to 100 mm/s
- Vacuum-sealed spool packaging with desiccant included
Cons
- Requires high heated bed temperatures between 80°C and 100°C
- Manufacturer recommends an enclosure and bed glue
Good fit if
- You print functional parts destined for outdoor weather and UV exposure.
- You have a 3D printer equipped with an enclosure and high-temperature bed.
Skip if
- You run an open-frame 3D printer without an enclosed chamber.
- You lack a heated print bed capable of reaching 80°C to 100°C.
Verdict: iSANMATE 1.75mm Carbon Fiber ASA Filament provides weather resistance and tight +/- 0.02 mm accuracy for outdoor functional components. You will need an enclosure and a 100°C capable heated bed to run it reliably.
ELEGOO Carbon Fiber ASA 1.75mm Filament
Best for: outdoor functional parts and high-heat enclosures
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- ASA-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Surface Finish
- Textured matte
- Printing Technology
- FDM
This 1kg spool of ELEGOO 1.75mm filament pairs weather-resistant ASA plastic with carbon fiber reinforcement. It features a heat deflection temperature up to 108°C and provides higher stiffness with lower warping than standard ASA. You get a textured matte finish that conceals layer lines directly off your FDM print bed. It suits you if you build rigid functional parts, drone components, or outdoor enclosures that face sun, heat, and rain.
Pros
- Heat deflection temperature up to 108°C for elevated-temperature applications
- Weather-resistant ASA formulation engineered for outdoor sun and rain exposure
- Carbon fiber reinforcement delivers increased rigidity and reduces warping
- Textured matte finish naturally softens visible layer lines
Cons
- Comes in red, which may not suit projects requiring neutral tones
- Offered only in 1.75mm diameter, excluding 2.85mm print setups
Good fit if
- You need rigid parts that withstand direct sun, rain, and outdoor weathering.
- You require heat resistance up to 108°C for automotive or industrial components.
- You want lower warping and better dimensional control on large functional prints.
Skip if
- You run a 3D printer that requires 2.85mm filament.
- You need standard black or neutral-colored filament for your build.
Verdict: ELEGOO Carbon Fiber ASA 1.75mm Filament delivers outdoor durability and structural rigidity with heat resistance up to 108°C. Its low-warp formulation and matte surface make it a reliable choice for functional mechanical prints.
Creality PPA-CF 1kg Carbon Fiber Filament
Best for: high-heat and underwater functional engineering parts
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PPA-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensions
- 8.26 × 8.26 × 3.54 inches
- Weight
- 2.64 pounds
This 1kg spool from Creality provides 1.75mm high-performance PPA filament reinforced with 15 percent carbon fiber. It delivers operational heat resistance up to 220°C, high moisture stability for underwater use, and 48 percent higher strength than standard PA6-CF. You will need a sealed chamber and a hardened steel nozzle to feed it properly. It suits you if you build functional engineering parts, automotive components, or waterproof marine items.
Pros
- Maintains structural integrity at temperatures up to 220°C
- Formulated with 15% carbon fiber reinforcement
- Moisture stability supports underwater and high-humidity applications
- Delivers 48% higher strength than conventional PA6-CF
Cons
- Requires a sealed print space to print properly
- Requires a hardened steel nozzle to resist abrasion
Good fit if
- You need structural components that endure operating environments up to 220°C.
- You build functional automotive parts or submerged marine components.
- You operate a printer equipped with an enclosure and a hardened nozzle.
Skip if
- You print exclusively with an open-frame machine.
- You only have standard brass nozzles available on your printer.
Verdict: Creality PPA-CF 1kg Carbon Fiber Filament provides extreme 220°C thermal endurance and moisture resistance for demanding structural builds. It is a capable choice if your setup meets the necessary enclosed-chamber and hardened-nozzle hardware demands.
Creality CR-PLA Carbon Fiber Filament 1.75mm 1kg
Best for: low-warp carbon fiber printing on mainstream FDM setups
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1 kg
- Dimensions
- 8.27 × 2.76 × 8.27 inches
- Weight
- 2.2 pounds
View on Amazon: Creality CR-PLA Carbon Fiber Filament 1.75mm 1kg
This 1.75mm spool holds 1 kg of carbon-fiber-reinforced PLA designed for low shrinkage and minimal warping. It feeds into standard FDM setups like Ender, CR, MK3, and Anycubic machines without plugging. The carbon formulation provides chemical and weather resistance alongside odor-free extrusion. You get a rigid composite filament that maintains uniform line diameter for structural or artistic parts that need added hardness.
Pros
- Standard 1.75mm diameter on a 1kg (2.2 lb) spool
- Formulated for low shrinkage to resist warping and blistering
- Chemical and weather resistance with non-toxic, odorless extrusion
- Direct compatibility across MK3, Ender, ELEGOO, and Anycubic printers
Cons
- Requires dry, ventilated storage away from sunlight, heat, and humidity
- Limited to a single 1kg Carbon Fiber Black option in this listing
Good fit if
- You need a low-warp, rigid carbon composite on standard 1.75mm hardware.
- You want odorless printing with built-in weather and chemical resistance.
Skip if
- You cannot maintain low-humidity storage conditions for open spools.
- You require an engineering polymer base like nylon instead of PLA.
Verdict: Creality CR-PLA Carbon Fiber Filament 1.75mm 1kg delivers increased hardness, low shrinkage, and weather resistance for mainstream FDM platforms. It functions as a rigid, dimensionally stable material that eliminates harsh extrusion odors.
SUNLU PA6-CF & PA12-CF 4kg Bundle
Best for: printing high-heat and chemical-resistant nylon parts
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PA6-CF, PA12-CF
- Net Weight
- 4 x 1kg
- Max Print Speed
- 100mm/s
- Dimensional Accuracy
- +/- 0.03mm
- Compatible Material
- Nylon
This bundle provides four 1kg spools of 1.75mm carbon-fiber nylon, combining two spools of PA6-CF and two spools of PA12-CF. Both formulations blend 80 percent nylon with 20 percent carbon fiber. PA6-CF offers heat resistance up to 209°C, while PA12-CF provides chemical resistance and comes on spools safe to dry at 110°C. You will need a hotend reaching 260°C to 280°C and bed glue to print these engineering materials.
Pros
- Includes two 1kg PA6-CF spools and two 1kg PA12-CF spools
- Reinforced with 20% carbon fiber in both formulations
- PA6-CF heat deflection temperature reaches 209°C (408°F)
- PA12-CF spools withstand oven drying up to 110°C (230°F)
Cons
- Requires high nozzle temperatures between 260°C and 280°C
- Print bed glue is explicitly required for both materials
- Packaged strictly as a four-spool bundle in black
Good fit if
- You need both heat-resistant PA6-CF and chemical-resistant PA12-CF in a multi-spool bundle.
- You run a 3D printer with a hotend capable of reaching up to 280°C.
- You want filament spools rated to handle 110°C drying cycles before printing.
Skip if
- You only need a single 1kg spool of carbon fiber nylon.
- You have a 3D printer limited to nozzle temperatures below 260°C.
- You prefer printing without adhesive bed glue.
Verdict: SUNLU PA6-CF & PA12-CF 4kg Bundle supplies four kilograms of 20% carbon-reinforced nylon suited for high-temperature and chemical-resistant parts. You need an extruder capable of 280°C and bed adhesive to handle both included nylon formulations.
SUNLU PA6-CF Carbon Fiber Nylon Filament
Best for: High-temperature functional parts and mechanical components
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PA6-CF20
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 150mm/s
- Dimensional Accuracy
- +/- 0.03mm
SUNLU PA6-CF20 is a 1.75 mm nylon filament reinforced with 20% carbon fiber and 80% polyamide. It withstands temperatures up to 209°C and prints at nozzle temperatures between 270°C and 290°C. If you need structural parts like gears, fan blades, or brackets that tolerate heavy mechanical stress and high heat, this filament suits your functional engineering projects, provided your printer supports abrasive, high-temperature materials.
Pros
- Reinforced blend of 80% polyamide and 20% carbon fiber
- Heat resistance rated up to 209°C
- Dimensional accuracy specified within +/- 0.03 mm
- Print speed supported from 50 mm/s up to 150 mm/s
Cons
- Incompatible with AMS, AMS Lite, and multi-color systems
- Requires high nozzle temperatures up to 290°C and a hardened steel nozzle
- Requires pre-drying for 4 to 24 hours prior to printing
Good fit if
- You need parts capable of handling continuous heat up to 209°C.
- You have a printer equipped with an abrasive-resistant nozzle and 290°C hotend.
- You have drying equipment to prepare nylon before printing.
Skip if
- You route filament through an AMS or automated multi-material feeder.
- Your 3D printer hotend cannot exceed 270°C.
Verdict: SUNLU PA6-CF20 Carbon Fiber Nylon Filament delivers high structural stiffness and 209°C heat resistance for demanding functional prints. Its brittle nature and high thermal requirements exclude multi-material feeders and standard brass hotends.
Creality Hyper PETG-CF 1.75mm Filament
Best for: Creality users printing outdoor functional parts
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- PETG-CF
- Filament Diameter
- 1.75 mm
- Net Weight
- 1KG
- Max Print Speed
- 300 mm/s
- Dimensional Accuracy
- ±0.02 mm
Creality Hyper PETG-CF is a 1.75 mm carbon-fiber-reinforced PETG filament supplied on a 1 kg spool. It provides a tensile strength of 44.9 MPa, flexural strength of 88.1 MPa, and an 8.7% elongation at break. The material supports print speeds up to 300 mm/s and includes embedded RFID tags for automated parameter detection with the Creality Filament System. It suits you if you need chemical-resistant outdoor parts with a low-reflectivity matte finish.
Pros
- Supports print speeds up to 300 mm/s
- Embedded RFID for automatic setup with Creality Filament System
- Chemical resistance against acids, alkalis, and organic solvents
- Diameter tolerance held to ±0.02 mm
Cons
- RFID parameter detection requires Creality Filament System hardware
- Carbon-fiber PETG option in the listing is limited to Night Gray
Good fit if
- You use a Creality Filament System and want automated spool setup.
- You print outdoor components requiring resistance to moisture, heat, and solvents.
- You run high-speed print jobs up to 300 mm/s.
Skip if
- You require multiple color choices beyond gray for your carbon-fiber prints.
- You use non-Creality hardware that cannot read the embedded RFID tag.
Verdict: Creality Hyper PETG-CF 1.75mm Filament delivers rigid, chemical-resistant prints at speeds up to 300 mm/s. It is an effective option for outdoor functional components, especially when paired with Creality RFID hardware.
iSANMATE 4x250g Carbon Fiber PLA Bundle
Best for: small multi-color rigid PLA prints
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- Carbon Fiber PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 4 x 250g
- Max Print Speed
- 130mm/s
- Dimensional Accuracy
- +/- 0.03 mm
This bundle provides four 250-gram spools of 1.75 mm carbon fiber PLA filament in four distinct colors: blue, army green, gold, and brown. Each spool features a 10% carbon fiber fill blended into PLA, running at nozzle temperatures between 200°C and 240°C with bed temperatures of 45°C to 60°C. If you want multi-color functional prints without committing to single full-kilogram spools, this four-pack suits your multi-hue prototyping needs.
Pros
- Four-color multi-pack includes blue, army green, gold, and brown spools
- Reinforced with approximately 10% carbon fiber content
- Standard PLA-compatible bed temperature range of 45°C to 60°C
- Dried 24 hours prior to vacuum sealing
Cons
- Divided into four 250g spools rather than continuous 1kg rolls
- Carbon fiber content capped at roughly 10%
Good fit if
- You need multiple colors of carbon fiber filament for smaller projects
- You want to print carbon fiber blends at bed temperatures of 45°C to 60°C
- You use standard 1.75 mm FDM 3D printers
Skip if
- You need a single continuous 1kg spool for large, uninterrupted prints
- You require a high carbon fiber loading exceeding 10%
Verdict: iSANMATE 4x250g Carbon Fiber PLA Bundle offers four colored quarter-kilogram spools with 10% carbon fiber reinforcement for versatile prototyping. It is well-suited for varied smaller prints requiring enhanced rigidity without buying multiple full-size rolls.
ZIRO 15% Carbon Fiber PLA Filament 0.8kg
Best for: rigid PLA prints on standard heated beds
- Features
- Carbon Fiber (what this guide is about)
- Material Type
- Carbon Fiber PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 0.8KG
- Max Print Speed
- 70 mm/s
- Dimensional Accuracy
- +/- 0.03mm
ZIRO 15% Carbon Fiber PLA Filament 0.8kg blends standard PLA with 15% carbon fiber to boost rigidity. It uses a 1.75 mm diameter with +/- 0.03 mm tolerance and runs at 200°C to 220°C nozzle temperatures with a 50°C to 60°C bed. You get an 0.8 kg spool rather than the common 1 kg capacity. It suits you if you want rigid parts printable on standard beds without high chamber heat.
Pros
- 15% carbon fiber blend increases rigidity over standard PLA
- Moderate thermal requirements with 200–220°C nozzle and 50–60°C bed
- CCD-controlled diameter tolerance of +/- 0.03 mm
- Includes 5 m cleaning filament, 5 m sample, and resealable bag
Cons
- Spool holds 0.8 kg of filament instead of 1 kg
- Abrasive composite requires a 0.4 mm hardened nozzle
Good fit if
- You want carbon fiber stiffness without high-temperature extruder requirements.
- You run standard 1.75 mm FDM hardware equipped with a hardened nozzle.
Skip if
- You need full 1 kg spools to complete large continuous print jobs.
- You only use standard brass nozzles susceptible to composite wear.
Verdict: ZIRO 15% Carbon Fiber PLA Filament 0.8kg delivers reinforced rigidity with manageable PLA printing temperatures. It provides high dimensional precision despite shipping on a smaller 0.8 kg spool.
Specifications side by side
| Spec | SUNLU Carbon Fiber PETG Filament 1kg | OVERTURE Matte Carbon Fiber PLA 1kg | SUNLU Carbon Fiber PLA Filament 1kg | Polymaker Fiberon PA12-CF10 Carbon Fiber Nylon | ELEGOO PAHT Carbon Fiber Filament 1KG | Flashforge 1.75mm Blue Carbon Fiber PLA | iSANMATE 1.75mm Carbon Fiber ASA Filament | ELEGOO Carbon Fiber ASA 1.75mm Filament | Creality PPA-CF 1kg Carbon Fiber Filament | Creality CR-PLA Carbon Fiber Filament 1.75mm 1kg | SUNLU PA6-CF & PA12-CF 4kg Bundle | SUNLU PA6-CF Carbon Fiber Nylon Filament | Creality Hyper PETG-CF 1.75mm Filament | iSANMATE 4x250g Carbon Fiber PLA Bundle | ZIRO 15% Carbon Fiber PLA Filament 0.8kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material Type | PETG-CF | PLA | PLA-CF | PA12 | PAHT-CF | Carbon Fiber PLA | ASA CF | ASA-CF | PPA-CF | PLA | PA6-CF, PA12-CF | PA6-CF20 | PETG-CF | Carbon Fiber PLA | Carbon Fiber PLA |
| Filament Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm | not specified | 1.75mm | 1.75 mm | 1.75mm | 1.75mm |
| Net Weight | 1kg | 1kg | 1KG | 0.5kg | 1KG | 1KG | 1kg | 1kg | 1kg | 1 kg | 4 x 1kg | 1KG | 1KG | 4 x 250g | 0.8KG |
| Max Print Speed | 150mm/s | not specified | not specified | 300mm/s | not specified | not specified | 100mm/s | not specified | not specified | not specified | 100mm/s | 150mm/s | 300 mm/s | 130mm/s | 70 mm/s |
| Dimensional Accuracy | +/- 0.03mm | not specified | +/- 0.02mm | not specified | not specified | +/- 0.02mm | +/- 0.02mm | not specified | not specified | not specified | +/- 0.03mm | +/- 0.03mm | ±0.02 mm | +/- 0.03 mm | +/- 0.03mm |
| Surface Finish | Matte | Matte | Matte | not specified | not specified | not specified | not specified | Textured matte | not specified | not specified | not specified | not specified | Matte | not specified | not specified |
| Printing Technology | not specified | not specified | not specified | not specified | not specified | not specified | not specified | FDM | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Compatible Material | PETG | PLA | PLA | Nylon | not specified | PLA | ASA | ASA | not specified | not specified | Nylon | Nylon | PETG | PLA | PLA |
| Features | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber |
| Color | 1kg Carbon Fiber Petg | Carbon Fiber Black | Strong Carbon Fiber | Black Pa12-cf10 | Paht-cf Black 1000g | Blue | Black Cf | Asa-cf Red 1kg | Ppa-cf-black | 1kg Carbon Fiber Black | 4*1kg Pa6cf*2+pa12cf*2 Black | 1kg Pa6-cf20 Black (Hex Code: #000000 ) | Petg-night Gray-1kg | A- Carbon Cf(blue, Army Green, Gold, Brown) | Cf-black |
| Size | 1KG | 1KG | 1KG | 0.5kg | 1KG | PLA CF | 1X 1KG | ASA 1.75mm | 1KG | 2.2lb | Bundle | Nylon | Petg Cf | 4 X 250g | not specified |
| Finish | Matte | Matte | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Application | not specified | not specified | not specified | not specified | not specified | not specified | Functional Parts | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Resin Type | not specified | not specified | not specified | not specified | not specified | not specified | Tough | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Weight | 2.2 pounds | 2.2 pounds | 2.2 pounds | 1.1 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 2.64 pounds | 2.2 pounds | 8.82 pounds | 2.2 pounds | 2.2 pounds | 2.2 pounds | 1.76 pounds |
| Dimensions | not specified | 3.54 × 3.15 × 1.18 inches | not specified | 7.87 × 7.87 × 2.64 inches | not specified | not specified | not specified | not specified | 8.26 × 8.26 × 3.54 inches | 8.27 × 2.76 × 8.27 inches | not specified | not specified | not specified | 1 × 1 × 1 inches | 8.2 × 8.2 × 3.2 inches |
| Length | not specified | not specified | not specified | not specified | not specified | not specified | 1 inches | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Height | not specified | not specified | not specified | not specified | not specified | not specified | 1 inches | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Model | 3D Printer Filament Carbon Fiber PETG | OVFBC175 | 3D Printer Filament Carbon Fiber PLA | FG04001 | US-EL-3D-PAC01 | FF-PLA CF | not specified | not specified | PLA | 3301060002 | PA6-CF & PA12-CF Engineering Filament | Filament Technique pour Impression 3D | not specified | PLA-Carbon-4pack | 1.75mm |
If you print abrasive composites indoors, you can compare filtration specs among the best air purifiers with carbon filter to evaluate workspace air handling.
How to Choose Carbon Fiber Filament
-
Check Dimensional Tolerance Ratings
Check the stated dimensional accuracy before buying carbon fiber filament. Most composite spools provide a standard tolerance of ±0.03 mm, which works well for general structural parts. If you are printing tight-fitting mechanical assemblies or press-fit components, choose a spool rated at ±0.02 mm. The Flashforge 1.75mm Blue Carbon Fiber PLA specifies a tight ±0.02 mm tolerance to minimize flow variation. Consistent diameter prevents under-extrusion and layer binding issues, which helps you produce accurate dimensions across taller print jobs without manual flow rate adjustments.
-
Evaluate Fiber Reinforcement Ratios
Review the percentage of carbon fiber embedded in the base polymer. Spools typically list fiber contents ranging from 10 percent up to 20 percent. A lower 10 percent fill improves stiffness while preserving ease of extrusion on standard setups. Higher percentages deliver greater structural rigidity and bending resistance, making them better suited for load-bearing brackets and frames. The SUNLU Carbon Fiber PLA Filament 1kg specifies a 15% carbon fiber reinforcement ratio. Selecting a higher fiber percentage maximizes part stiffness, though it increases filament brittleness before feeding through your extruder drive gears.
-
Match Spool Weight to Projects
Check the spool net weight to avoid buying excess composite material that risks ambient moisture absorption. Standard spools come in 1kg or 2.2-pound formats, which suit recurring functional manufacturing. If you only need test parts, smaller 0.5kg spools or multi-packs prevent unfinished rolls from sitting open. The iSANMATE 4x250g Carbon Fiber PLA Bundle splits one kilogram into four 250g spools in distinct colors. Choose smaller divided spools if you prototype varied parts occasionally, and stick to full 1kg reels when you produce large continuous mechanical components without spool swaps.
-
Verify Print Speed Ratings
Examine the manufacturer print speed rating if you run a modern high-speed printer. Standard carbon fiber filaments often require moderate printing speeds to maintain consistent layer adhesion and prevent nozzle clogs. If your workflow relies on fast cycle times, verify that the filament formulation supports high volumetric flow. The Creality Hyper PETG-CF 1.75mm Filament is rated for print speeds up to 300 mm/s. Selecting a high-speed certified composite ensures the polymer melts evenly at elevated feed rates, protecting against under-extrusion and mechanical layer weakness when running accelerated print profiles.
-
Inspect Surface Finish Specs
Check the specified surface finish if part aesthetics and layer line concealment matter for your project. Many carbon fiber filaments produce a textured matte surface because dispersed carbon fibers diffuse light across outer walls. The OVERTURE Matte Carbon Fiber PLA 1kg explicitly specifies a non-reflective matte finish. If you build display models, camera mounts, or consumer-facing enclosures, a dedicated matte finish helps hide layer lines and reduces glare. For internal mechanical gears or sliding components where lower surface friction is needed, verify whether a smoother, non-matte composite specification serves your assembly better.
Frequently asked questions
Do you need a hardened nozzle to print carbon fiber filament?
You need a hardened steel or abrasion-resistant nozzle for carbon fiber filaments. The chopped fibers within the polymer quickly erode standard brass nozzles, expanding the orifice and ruining print precision. Listings like SUNLU PA6-CF explicitly state that standard brass hotends are excluded because abrasive carbon strands wear down soft metals rapidly during extrusion.
Which carbon fiber filament is best for outdoor use?
Carbon fiber ASA and PETG formulations are best suited for outdoor conditions. The iSANMATE Carbon Fiber ASA is formulated specifically for outdoor functional components requiring UV resistance. ELEGOO Carbon Fiber ASA also provides outdoor durability with thermal resistance up to 108°C, while Creality Hyper PETG-CF lists outdoor functional parts and chemical resistance among its primary capabilities.
What percentage of carbon fiber is added to 3D printing filaments?
Most 3D printing composite filaments incorporate between 10% and 20% carbon fiber reinforcement. Flashforge Blue PLA and the iSANMATE four-pack bundle each feature a 10% fiber ratio. For higher stiffness, SUNLU Carbon Fiber PLA and ZIRO PLA incorporate 15% carbon fiber, while the SUNLU PA6-CF and PA12-CF nylon bundle provides a 20% reinforcement blend.
How much heat resistance does carbon fiber filament provide?
Heat resistance depends heavily on the base polymer carrying the carbon fibers. Base polymers like PETG reach 130°C in SUNLU Carbon Fiber PETG, while ELEGOO Carbon Fiber ASA handles up to 108°C. For extreme temperature needs, nylon composites go much higher: ELEGOO PAHT-CF resists 194°C, SUNLU PA6-CF withstands 209°C, and Creality PPA-CF delivers thermal endurance up to 220°C.
Can you run carbon fiber filaments through multi-material systems?
You should avoid using brittle carbon fiber composites in automatic multi-material systems unless the manufacturer confirms compatibility. For example, SUNLU PA6-CF documentation notes that its brittle composition excludes multi-material feeders. The rigid fibers can snap inside tight bend radiuses, break within selector units, and cause severe feed jams along the internal filament guide paths.
Can you buy carbon fiber filament in colors other than black?
You can find colored carbon fiber filaments, though the carbon strands often produce darker shades. Flashforge produces a Blue Carbon Fiber PLA, and ELEGOO offers a Red Carbon Fiber ASA. For greater variety, the iSANMATE 4x250g bundle provides four separate colors: carbon blue, army green, gold, and brown, allowing multi-color printing with composite reinforcement.
What spool sizes can you get for carbon fiber filament?
Standard 1 kg spools are most common, but specialty weights are available across different materials. Polymaker Fiberon PA12-CF10 comes in a smaller 0.5 kg spool, while ZIRO Carbon Fiber PLA supplies a 0.8 kg roll. If you need larger quantities, SUNLU offers a 4 kg nylon bundle containing two spools of PA6-CF and two spools of PA12-CF.